[v9,12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes

Message ID 20190925174616.3714-13-dmurphy@ti.com
State Superseded
Headers show
Series
  • Multicolor Framework
Related show

Commit Message

Dan Murphy Sept. 25, 2019, 5:46 p.m.
Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

CC: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-href.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.22.0.214.g8dca754b1e

Patch

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6422c53f2046..46a7dfa20a2e 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -56,16 +56,21 @@ 
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				chan0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
 				chan1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -75,15 +80,20 @@ 
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				chan0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};