diff mbox series

[PULL,13/68] hw/timer/digic-timer.c: Switch to transaction-based ptimer API

Message ID 20191014160404.19553-14-peter.maydell@linaro.org
State Accepted
Commit 30e22c8733e8b2bed7dc77c4f9ebc7a4a4114632
Headers show
Series target-arm queue | expand

Commit Message

Peter Maydell Oct. 14, 2019, 4:03 p.m. UTC 
Switch the digic-timer.c code away from bottom-half based ptimers to
the new transaction-based ptimer API.  This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Message-id: 20191008171740.9679-11-peter.maydell@linaro.org
---
 hw/timer/digic-timer.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c
index b111e1fe643..32612228daf 100644
--- a/hw/timer/digic-timer.c
+++ b/hw/timer/digic-timer.c
@@ -29,7 +29,6 @@ 
 #include "qemu/osdep.h"
 #include "hw/sysbus.h"
 #include "hw/ptimer.h"
-#include "qemu/main-loop.h"
 #include "qemu/module.h"
 #include "qemu/log.h"
 
@@ -52,7 +51,9 @@  static void digic_timer_reset(DeviceState *dev)
 {
     DigicTimerState *s = DIGIC_TIMER(dev);
 
+    ptimer_transaction_begin(s->ptimer);
     ptimer_stop(s->ptimer);
+    ptimer_transaction_commit(s->ptimer);
     s->control = 0;
     s->relvalue = 0;
 }
@@ -93,16 +94,20 @@  static void digic_timer_write(void *opaque, hwaddr offset,
             break;
         }
 
+        ptimer_transaction_begin(s->ptimer);
         if (value & DIGIC_TIMER_CONTROL_EN) {
             ptimer_run(s->ptimer, 0);
         }
 
         s->control = (uint32_t)value;
+        ptimer_transaction_commit(s->ptimer);
         break;
 
     case DIGIC_TIMER_RELVALUE:
         s->relvalue = extract32(value, 0, 16);
+        ptimer_transaction_begin(s->ptimer);
         ptimer_set_limit(s->ptimer, s->relvalue, 1);
+        ptimer_transaction_commit(s->ptimer);
         break;
 
     case DIGIC_TIMER_VALUE:
@@ -125,17 +130,24 @@  static const MemoryRegionOps digic_timer_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
+static void digic_timer_tick(void *opaque)
+{
+    /* Nothing to do on timer rollover */
+}
+
 static void digic_timer_init(Object *obj)
 {
     DigicTimerState *s = DIGIC_TIMER(obj);
 
-    s->ptimer = ptimer_init_with_bh(NULL, PTIMER_POLICY_DEFAULT);
+    s->ptimer = ptimer_init(digic_timer_tick, NULL, PTIMER_POLICY_DEFAULT);
 
     /*
      * FIXME: there is no documentation on Digic timer
      * frequency setup so let it always run at 1 MHz
      */
+    ptimer_transaction_begin(s->ptimer);
     ptimer_set_freq(s->ptimer, 1 * 1000 * 1000);
+    ptimer_transaction_commit(s->ptimer);
 
     memory_region_init_io(&s->iomem, OBJECT(s), &digic_timer_ops, s,
                           TYPE_DIGIC_TIMER, 0x100);