diff mbox series

[PULL,31/41] target/arm: Rebuild hflags for M-profile NVIC

Message ID 20191022133134.14487-32-peter.maydell@linaro.org
State Superseded
Headers show
Series target-arm queue | expand

Commit Message

Peter Maydell Oct. 22, 2019, 1:31 p.m. UTC 
From: Richard Henderson <richard.henderson@linaro.org>


Continue setting, but not relying upon, env->hflags.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Message-id: 20191018174431.1784-22-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

---
 hw/intc/armv7m_nvic.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 8e93e51e815..e8c74f9ebaf 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -2251,7 +2251,7 @@  static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
             }
         }
         nvic_irq_update(s);
-        return MEMTX_OK;
+        goto exit_ok;
     case 0x200 ... 0x23f: /* NVIC Set pend */
         /* the special logic in armv7m_nvic_set_pending()
          * is not needed since IRQs are never escalated
@@ -2269,9 +2269,9 @@  static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
             }
         }
         nvic_irq_update(s);
-        return MEMTX_OK;
+        goto exit_ok;
     case 0x300 ... 0x33f: /* NVIC Active */
-        return MEMTX_OK; /* R/O */
+        goto exit_ok; /* R/O */
     case 0x400 ... 0x5ef: /* NVIC Priority */
         startvec = (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */
 
@@ -2281,10 +2281,10 @@  static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
             }
         }
         nvic_irq_update(s);
-        return MEMTX_OK;
+        goto exit_ok;
     case 0xd18 ... 0xd1b: /* System Handler Priority (SHPR1) */
         if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) {
-            return MEMTX_OK;
+            goto exit_ok;
         }
         /* fall through */
     case 0xd1c ... 0xd23: /* System Handler Priority (SHPR2, SHPR3) */
@@ -2299,10 +2299,10 @@  static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
             set_prio(s, hdlidx, sbank, newprio);
         }
         nvic_irq_update(s);
-        return MEMTX_OK;
+        goto exit_ok;
     case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */
         if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) {
-            return MEMTX_OK;
+            goto exit_ok;
         }
         /* All bits are W1C, so construct 32 bit value with 0s in
          * the parts not written by the access size
@@ -2322,15 +2322,19 @@  static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
              */
             s->cpu->env.v7m.cfsr[M_REG_NS] &= ~(value & R_V7M_CFSR_BFSR_MASK);
         }
-        return MEMTX_OK;
+        goto exit_ok;
     }
     if (size == 4) {
         nvic_writel(s, offset, value, attrs);
-        return MEMTX_OK;
+        goto exit_ok;
     }
     qemu_log_mask(LOG_GUEST_ERROR,
                   "NVIC: Bad write of size %d at offset 0x%x\n", size, offset);
     /* This is UNPREDICTABLE; treat as RAZ/WI */
+
+ exit_ok:
+    /* Ensure any changes made are reflected in the cached hflags.  */
+    arm_rebuild_hflags(&s->cpu->env);
     return MEMTX_OK;
 }