diff mbox series

[05/10] nvmem: imx-ocotp: reset error status on probe

Message ID 20191029114240.14905-6-srinivas.kandagatla@linaro.org
State New
Headers show
Series nvmem: patches(set 1) for 5.5 | expand

Commit Message

Srinivas Kandagatla Oct. 29, 2019, 11:42 a.m. UTC 
From: Lucas Stach <l.stach@pengutronix.de>


If software running before the OCOTP driver is loaded left the
controller with the error status pending, the driver will never
be able to complete the read timing setup. Reset the error status
on probe to make sure the controller is in usable state.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/nvmem/imx-ocotp.c | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.21.0
diff mbox series

Patch

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index dff2f3c357f5..fc40555ca4cd 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -521,6 +521,10 @@  static int imx_ocotp_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk))
 		return PTR_ERR(priv->clk);
 
+	clk_prepare_enable(priv->clk);
+	imx_ocotp_clr_err_if_set(priv->base);
+	clk_disable_unprepare(priv->clk);
+
 	priv->params = of_device_get_match_data(&pdev->dev);
 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
 	imx_ocotp_nvmem_config.dev = dev;