diff mbox series

[1/2] config: remove redundant dpaa2 build

Message ID 20191104112112.10211-1-hemant.agrawal@nxp.com
State Superseded
Headers show
Series [1/2] config: remove redundant dpaa2 build | expand

Commit Message

Hemant Agrawal Nov. 4, 2019, 11:21 a.m. UTC
dpaa and dpaa2 config have evolved to be same. The same binaray
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

---
 config/arm/arm64_dpaa2_linux_gcc              | 16 --------
 config/arm/meson.build                        |  7 ----
 config/defconfig_arm64-dpaa-linuxapp-gcc      | 16 ++++++--
 config/defconfig_arm64-dpaa2-linux-gcc        |  1 -
 doc/guides/cryptodevs/dpaa2_sec.rst           |  4 +-
 doc/guides/eventdevs/dpaa2.rst                |  2 +-
 .../linux_gsg/cross_build_dpdk_for_arm64.rst  |  2 +-
 doc/guides/nics/build_and_test.rst            |  2 +-
 doc/guides/nics/dpaa.rst                      | 12 +-----
 doc/guides/nics/dpaa2.rst                     |  8 ++--
 doc/guides/rawdevs/dpaa2_cmdif.rst            |  2 +-
 doc/guides/rawdevs/dpaa2_qdma.rst             |  2 +-
 doc/guides/rel_notes/release_19_11.rst        |  2 +
 mk/machine/dpaa2/rte.vars.mk                  | 37 -------------------
 14 files changed, 26 insertions(+), 87 deletions(-)
 delete mode 100644 config/arm/arm64_dpaa2_linux_gcc
 delete mode 120000 config/defconfig_arm64-dpaa2-linux-gcc
 delete mode 100644 mk/machine/dpaa2/rte.vars.mk

-- 
2.17.1

Comments

David Marchand Nov. 4, 2019, 8:48 p.m. UTC | #1
On Mon, Nov 4, 2019 at 12:24 PM Hemant Agrawal <hemant.agrawal@nxp.com> wrote:
>

> dpaa and dpaa2 config have evolved to be same. The same binaray


binary*

> can now work across the platforms. So, there is no need to maintain

> two different build configs.

> The dpaa config shall work for both generation of dpaa platforms.

>

> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

> ---

>  config/arm/arm64_dpaa2_linux_gcc              | 16 --------

>  config/arm/meson.build                        |  7 ----

>  config/defconfig_arm64-dpaa-linuxapp-gcc      | 16 ++++++--

>  config/defconfig_arm64-dpaa2-linux-gcc        |  1 -


You missed config/defconfig_arm64-dpaa2-linuxapp-gcc.


>  doc/guides/cryptodevs/dpaa2_sec.rst           |  4 +-

>  doc/guides/eventdevs/dpaa2.rst                |  2 +-

>  .../linux_gsg/cross_build_dpdk_for_arm64.rst  |  2 +-

>  doc/guides/nics/build_and_test.rst            |  2 +-

>  doc/guides/nics/dpaa.rst                      | 12 +-----

>  doc/guides/nics/dpaa2.rst                     |  8 ++--

>  doc/guides/rawdevs/dpaa2_cmdif.rst            |  2 +-

>  doc/guides/rawdevs/dpaa2_qdma.rst             |  2 +-

>  doc/guides/rel_notes/release_19_11.rst        |  2 +

>  mk/machine/dpaa2/rte.vars.mk                  | 37 -------------------

>  14 files changed, 26 insertions(+), 87 deletions(-)

>  delete mode 100644 config/arm/arm64_dpaa2_linux_gcc

>  delete mode 120000 config/defconfig_arm64-dpaa2-linux-gcc

>  delete mode 100644 mk/machine/dpaa2/rte.vars.mk

>

> diff --git a/config/arm/arm64_dpaa2_linux_gcc b/config/arm/arm64_dpaa2_linux_gcc

> deleted file mode 100644

> index 0df8c8f7d..000000000

> --- a/config/arm/arm64_dpaa2_linux_gcc

> +++ /dev/null

> @@ -1,16 +0,0 @@

> -[binaries]

> -c = 'aarch64-linux-gnu-gcc'

> -cpp = 'aarch64-linux-gnu-cpp'

> -ar = 'aarch64-linux-gnu-ar'

> -as = 'aarch64-linux-gnu-as'

> -strip = 'aarch64-linux-gnu-strip'

> -pcap-config = ''

> -

> -[host_machine]

> -system = 'linux'

> -cpu_family = 'aarch64'

> -cpu = 'armv8-a'

> -endian = 'little'

> -

> -[properties]

> -implementor_id = 'dpaa2'

> diff --git a/config/arm/meson.build b/config/arm/meson.build

> index d9f9811f7..f00aecd7e 100644

> --- a/config/arm/meson.build

> +++ b/config/arm/meson.build

> @@ -49,12 +49,6 @@ flags_dpaa = [

>         ['RTE_CACHE_LINE_SIZE', 64],

>         ['RTE_MAX_NUMA_NODES', 1],

>         ['RTE_MAX_LCORE', 16]]


We have a build error here.

config/arm/meson.build:52:42: ERROR: Expecting eof got rbracket.
    ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
                                          ^

A full log can be found at
/home/dmarchan/dpdk/build-arm64-host-clang/meson-logs/meson-log.txt
FAILED: build.ninja

I suppose you want to s/]$/,/


> -flags_dpaa2 = [

> -       ['RTE_MACHINE', '"dpaa2"'],

> -       ['RTE_USE_C11_MEM_MODEL', true],

> -       ['RTE_CACHE_LINE_SIZE', 64],

> -       ['RTE_MAX_NUMA_NODES', 1],

> -       ['RTE_MAX_LCORE', 16],

>         ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]


Does it make sense to have/Do we really want:
- RTE_LIBRTE_DPAA2_USE_PHYS_IOVA enabled on all architectures but dpaa
- RTE_LIBRTE_DPAA2_USE_PHYS_IOVA enabled on all arm targets but dpaa


>  flags_armada = [

>         ['RTE_MACHINE', '"armv8a"'],

> @@ -115,7 +109,6 @@ impl_0x53 = ['Samsung', flags_generic, machine_args_generic]

>  impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic]

>  impl_0x69 = ['Intel', flags_generic, machine_args_generic]

>  impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic]

> -impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]

>

>  dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)

>

> diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc

> index 19614fb01..4ae4cd850 100644

> --- a/config/defconfig_arm64-dpaa-linuxapp-gcc

> +++ b/config/defconfig_arm64-dpaa-linuxapp-gcc

> @@ -1,14 +1,15 @@

>  # SPDX-License-Identifier: BSD-3-Clause

>  # Copyright 2016 Freescale Semiconductor, Inc.

> -# Copyright 2017 NXP

> +# Copyright 2017-2019 NXP

>

>  #include "defconfig_arm64-armv8a-linux-gcc"

>

> -# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support

> +# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support

> +# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046)

> +# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc)

> +#

>  CONFIG_RTE_MACHINE="dpaa"

>  CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"

> -CONFIG_RTE_LIBRTE_VHOST_NUMA=n

> -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n

>

>  #

>  # Compile Environment Abstraction Layer

> @@ -18,6 +19,13 @@ CONFIG_RTE_MAX_NUMA_NODES=1

>  CONFIG_RTE_CACHE_LINE_SIZE=64

>  CONFIG_RTE_PKTMBUF_HEADROOM=128

>

> +# Doesn't support NUMA

> +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n

> +CONFIG_RTE_LIBRTE_VHOST_NUMA=n

> +

> +# Enable PHY mode when using VM-VFIO target

> +CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

> +

>  # NXP DPAA Bus

>  CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n

>  CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n

> diff --git a/config/defconfig_arm64-dpaa2-linux-gcc b/config/defconfig_arm64-dpaa2-linux-gcc

> deleted file mode 120000

> index 9a6c6c4cb..000000000

> --- a/config/defconfig_arm64-dpaa2-linux-gcc

> +++ /dev/null

> @@ -1 +0,0 @@

> -defconfig_arm64-dpaa2-linuxapp-gcc

> \ No newline at end of file

> diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst

> index 9e21d3169..55f0d6856 100644

> --- a/doc/guides/cryptodevs/dpaa2_sec.rst

> +++ b/doc/guides/cryptodevs/dpaa2_sec.rst

> @@ -180,7 +180,7 @@ to enable DPAA2_SEC PMD.

>  Please note that enabling debugging options may affect system performance.

>

>  * ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``)

> -  By default it is only enabled in defconfig_arm64-dpaa2-* config.

> +  By default it is only enabled in defconfig_arm64-dpaa-* config.

>    Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.

>

>  Installations

> @@ -191,7 +191,7 @@ following ``make`` command:

>  .. code-block:: console

>

>     cd <DPDK-source-directory>

> -   make config T=arm64-dpaa2-linux-gcc install

> +   make config T=arm64-dpaa-linux-gcc install

>

>  Enabling logs

>  -------------

> diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst

> index a24a43c15..dd8ebbcd0 100644

> --- a/doc/guides/eventdevs/dpaa2.rst

> +++ b/doc/guides/eventdevs/dpaa2.rst

> @@ -71,7 +71,7 @@ following ``make`` command:

>  .. code-block:: console

>

>     cd <DPDK-source-directory>

> -   make config T=arm64-dpaa2-linux-gcc install

> +   make config T=arm64-dpaa-linux-gcc install

>

>  Initialization

>  --------------

> diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> index 28a8e0920..e799b0ba4 100644

> --- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> +++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> @@ -79,7 +79,7 @@ Copy the NUMA header files and lib to the cross compiler's directories:

>

>  Configure and cross compile DPDK Build

>  --------------------------------------

> -To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc.

> +To configure a build, choose one of the target configurations, like arm64-dpaa-linux-gcc and arm64-thunderx-linux-gcc.

>

>  .. code-block:: console

>

> diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst

> index aae5c111d..f99e019ff 100644

> --- a/doc/guides/nics/build_and_test.rst

> +++ b/doc/guides/nics/build_and_test.rst

> @@ -35,7 +35,7 @@ Example output:

>

>     arm-armv7a-linux-gcc

>     arm64-armv8a-linux-gcc

> -   arm64-dpaa2-linux-gcc

> +   arm64-dpaa-linux-gcc

>     arm64-thunderx-linux-gcc

>     arm64-xgene1-linux-gcc

>     i686-native-linux-gcc

> diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst

> index f85920012..17839a920 100644

> --- a/doc/guides/nics/dpaa.rst

> +++ b/doc/guides/nics/dpaa.rst

> @@ -201,14 +201,12 @@ Config File Options

>  The following options can be modified in the ``config`` file.

>  Please note that enabling debugging options may affect system performance.

>

> -- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``)

> +- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``)

>

> -  By default it is enabled only for defconfig_arm64-dpaa-* config.

>    Toggle compilation of the ``librte_bus_dpaa`` driver.

>

> -- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``)

> +- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``)

>

> -  By default it is enabled only for defconfig_arm64-dpaa-* config.

>    Toggle compilation of the ``librte_pmd_dpaa`` driver.

>

>  - ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``)

> @@ -222,12 +220,6 @@ Please note that enabling debugging options may affect system performance.

>    Enables debugging of the Queue and Buffer Manager layer which interacts

>    with the DPAA hardware.

>

> -- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``)

> -

> -  This is not a DPAA specific configuration - it is a generic RTE config.

> -  For optimal performance and hardware utilization, it is expected that DPAA

> -  Mempool driver is used for mempools. For that, this configuration needs to

> -  enabled.

>

>  Environment Variables

>  ~~~~~~~~~~~~~~~~~~~~~

> diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst

> index 99e4c8d72..b6d9e2129 100644

> --- a/doc/guides/nics/dpaa2.rst

> +++ b/doc/guides/nics/dpaa2.rst

> @@ -441,21 +441,19 @@ Config File Options

>  The following options can be modified in the ``config`` file.

>  Please note that enabling debugging options may affect system performance.

>

> -- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``n``)

> +- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``)

>

> -  By default it is enabled only for defconfig_arm64-dpaa2-* config.

>    Toggle compilation of the ``librte_bus_fslmc`` driver.

>

> -- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``n``)

> +- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``)

>

> -  By default it is enabled only for defconfig_arm64-dpaa2-* config.

>    Toggle compilation of the ``librte_pmd_dpaa2`` driver.

>

>  - ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

>

>    Toggle display of debugging messages/logic

>

> -- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``)

> +- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``)

>

>    Toggle to use physical address vs virtual address for hardware accelerators.

>

> diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst

> index ac5f0f137..bcd603c81 100644

> --- a/doc/guides/rawdevs/dpaa2_cmdif.rst

> +++ b/doc/guides/rawdevs/dpaa2_cmdif.rst

> @@ -77,7 +77,7 @@ following ``make`` command:

>  .. code-block:: console

>

>     cd <DPDK-source-directory>

> -   make config T=arm64-dpaa2-linux-gcc install

> +   make config T=arm64-dpaa-linux-gcc install

>

>  Initialization

>  --------------

> diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst b/doc/guides/rawdevs/dpaa2_qdma.rst

> index 1550ca5ba..a5085c2c0 100644

> --- a/doc/guides/rawdevs/dpaa2_qdma.rst

> +++ b/doc/guides/rawdevs/dpaa2_qdma.rst

> @@ -81,7 +81,7 @@ following ``make`` command:

>  .. code-block:: console

>

>     cd <DPDK-source-directory>

> -   make config T=arm64-dpaa2-linux-gcc install

> +   make config T=arm64-dpaa-linux-gcc install

>

>  Initialization

>  --------------

> diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst

> index ae8e7b2f0..27a17ede5 100644

> --- a/doc/guides/rel_notes/release_19_11.rst

> +++ b/doc/guides/rel_notes/release_19_11.rst

> @@ -267,6 +267,8 @@ Removed Items

>    * Quota and Watermark

>    * vhost-scsi

>

> +* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both

> +  dpaa and dpaa2 platforms.


Thanks for the release notes update.
We are just missing an empty line here.


>

>  API Changes

>  -----------

> diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk

> deleted file mode 100644

> index aaa03c424..000000000

> --- a/mk/machine/dpaa2/rte.vars.mk

> +++ /dev/null

> @@ -1,37 +0,0 @@

> -# SPDX-License-Identifier: BSD-3-Clause

> -# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.

> -# Copyright 2016 NXP

> -

> -#

> -# machine:

> -#

> -#   - can define ARCH variable (overridden by cmdline value)

> -#   - can define CROSS variable (overridden by cmdline value)

> -#   - define MACHINE_CFLAGS variable (overridden by cmdline value)

> -#   - define MACHINE_LDFLAGS variable (overridden by cmdline value)

> -#   - define MACHINE_ASFLAGS variable (overridden by cmdline value)

> -#   - can define CPU_CFLAGS variable (overridden by cmdline value) that

> -#     overrides the one defined in arch.

> -#   - can define CPU_LDFLAGS variable (overridden by cmdline value) that

> -#     overrides the one defined in arch.

> -#   - can define CPU_ASFLAGS variable (overridden by cmdline value) that

> -#     overrides the one defined in arch.

> -#   - may override any previously defined variable

> -#

> -

> -# ARCH =

> -# CROSS =

> -# MACHINE_CFLAGS =

> -# MACHINE_LDFLAGS =

> -# MACHINE_ASFLAGS =

> -# CPU_CFLAGS =

> -# CPU_LDFLAGS =

> -# CPU_ASFLAGS =

> -MACHINE_CFLAGS += -march=armv8-a+crc

> -

> -ifdef CONFIG_RTE_ARCH_ARM_TUNE

> -MACHINE_CFLAGS += -mtune=$(CONFIG_RTE_ARCH_ARM_TUNE:"%"=%)

> -endif

> -

> -# To avoid TLS corruption issue.

> -MACHINE_CFLAGS += -mtls-dialect=trad

> --

> 2.17.1

>



--
David Marchand
Hemant Agrawal Nov. 5, 2019, 3:41 a.m. UTC | #2
Hi David,

> -----Original Message-----

> From: David Marchand <david.marchand@redhat.com>

> Sent: Tuesday, November 5, 2019 2:18 AM

> To: Hemant Agrawal <hemant.agrawal@nxp.com>

> 

> On Mon, Nov 4, 2019 at 12:24 PM Hemant Agrawal

> <hemant.agrawal@nxp.com> wrote:

> >

> > dpaa and dpaa2 config have evolved to be same. The same binaray

> 

> binary*

> 

> > can now work across the platforms. So, there is no need to maintain

> > two different build configs.

> > The dpaa config shall work for both generation of dpaa platforms.

> >

> > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

> > ---

> >  config/arm/arm64_dpaa2_linux_gcc              | 16 --------

> >  config/arm/meson.build                        |  7 ----

> >  config/defconfig_arm64-dpaa-linuxapp-gcc      | 16 ++++++--

> >  config/defconfig_arm64-dpaa2-linux-gcc        |  1 -

> 

> You missed config/defconfig_arm64-dpaa2-linuxapp-gcc.

> 

[Hemant] yes
> 

> >  doc/guides/cryptodevs/dpaa2_sec.rst           |  4 +-

> >  doc/guides/eventdevs/dpaa2.rst                |  2 +-

> >  .../linux_gsg/cross_build_dpdk_for_arm64.rst  |  2 +-

> >  doc/guides/nics/build_and_test.rst            |  2 +-

> >  doc/guides/nics/dpaa.rst                      | 12 +-----

> >  doc/guides/nics/dpaa2.rst                     |  8 ++--

> >  doc/guides/rawdevs/dpaa2_cmdif.rst            |  2 +-

> >  doc/guides/rawdevs/dpaa2_qdma.rst             |  2 +-

> >  doc/guides/rel_notes/release_19_11.rst        |  2 +

> >  mk/machine/dpaa2/rte.vars.mk                  | 37 -------------------

> >  14 files changed, 26 insertions(+), 87 deletions(-)  delete mode

> > 100644 config/arm/arm64_dpaa2_linux_gcc  delete mode 120000

> > config/defconfig_arm64-dpaa2-linux-gcc

> >  delete mode 100644 mk/machine/dpaa2/rte.vars.mk

> >

> > diff --git a/config/arm/arm64_dpaa2_linux_gcc

> > b/config/arm/arm64_dpaa2_linux_gcc

> > deleted file mode 100644

> > index 0df8c8f7d..000000000

> > --- a/config/arm/arm64_dpaa2_linux_gcc

> > +++ /dev/null

> > @@ -1,16 +0,0 @@

> > -[binaries]

> > -c = 'aarch64-linux-gnu-gcc'

> > -cpp = 'aarch64-linux-gnu-cpp'

> > -ar = 'aarch64-linux-gnu-ar'

> > -as = 'aarch64-linux-gnu-as'

> > -strip = 'aarch64-linux-gnu-strip'

> > -pcap-config = ''

> > -

> > -[host_machine]

> > -system = 'linux'

> > -cpu_family = 'aarch64'

> > -cpu = 'armv8-a'

> > -endian = 'little'

> > -

> > -[properties]

> > -implementor_id = 'dpaa2'

> > diff --git a/config/arm/meson.build b/config/arm/meson.build index

> > d9f9811f7..f00aecd7e 100644

> > --- a/config/arm/meson.build

> > +++ b/config/arm/meson.build

> > @@ -49,12 +49,6 @@ flags_dpaa = [

> >         ['RTE_CACHE_LINE_SIZE', 64],

> >         ['RTE_MAX_NUMA_NODES', 1],

> >         ['RTE_MAX_LCORE', 16]]

> 

> We have a build error here.

> 

> config/arm/meson.build:52:42: ERROR: Expecting eof got rbracket.

>     ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]

>                                           ^

> 

> A full log can be found at

> /home/dmarchan/dpdk/build-arm64-host-clang/meson-logs/meson-log.txt

> FAILED: build.ninja

> 

> I suppose you want to s/]$/,/

> 

> 

[Hemant] yes
> > -flags_dpaa2 = [

> > -       ['RTE_MACHINE', '"dpaa2"'],

> > -       ['RTE_USE_C11_MEM_MODEL', true],

> > -       ['RTE_CACHE_LINE_SIZE', 64],

> > -       ['RTE_MAX_NUMA_NODES', 1],

> > -       ['RTE_MAX_LCORE', 16],

> >         ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]

> 

> Does it make sense to have/Do we really want:

> - RTE_LIBRTE_DPAA2_USE_PHYS_IOVA enabled on all architectures but dpaa

> - RTE_LIBRTE_DPAA2_USE_PHYS_IOVA enabled on all arm targets but dpaa

> 

[Hemant] RTE_LIBRTE_DPAA2_USE_PHYS_IOVA enabled on all architectures but dpaa

> 

> >  flags_armada = [

> >         ['RTE_MACHINE', '"armv8a"'],

> > @@ -115,7 +109,6 @@ impl_0x53 = ['Samsung', flags_generic,

> > machine_args_generic]

> >  impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic]

> >  impl_0x69 = ['Intel', flags_generic, machine_args_generic]  impl_dpaa

> > = ['NXP DPAA', flags_dpaa, machine_args_generic]

> > -impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]

> >

> >  dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)

> >

> > diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc

> > b/config/defconfig_arm64-dpaa-linuxapp-gcc

> > index 19614fb01..4ae4cd850 100644

> > --- a/config/defconfig_arm64-dpaa-linuxapp-gcc

> > +++ b/config/defconfig_arm64-dpaa-linuxapp-gcc

> > @@ -1,14 +1,15 @@

> >  # SPDX-License-Identifier: BSD-3-Clause  # Copyright 2016 Freescale

> > Semiconductor, Inc.

> > -# Copyright 2017 NXP

> > +# Copyright 2017-2019 NXP

> >

> >  #include "defconfig_arm64-armv8a-linux-gcc"

> >

> > -# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support

> > +# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support # DPAA

> > +- FMAN, QMAN & BMAN support (e.g. LS1043, LS1046) # DPAA2 - WRIOP

> and

> > +QBMAN (e.g. LS1088, LS2088, LX2160 etc) #

> >  CONFIG_RTE_MACHINE="dpaa"

> >  CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"

> > -CONFIG_RTE_LIBRTE_VHOST_NUMA=n

> > -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n

> >

> >  #

> >  # Compile Environment Abstraction Layer @@ -18,6 +19,13 @@

> > CONFIG_RTE_MAX_NUMA_NODES=1

> >  CONFIG_RTE_CACHE_LINE_SIZE=64

> >  CONFIG_RTE_PKTMBUF_HEADROOM=128

> >

> > +# Doesn't support NUMA

> > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n

> > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n

> > +

> > +# Enable PHY mode when using VM-VFIO target

> > +CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

> > +

> >  # NXP DPAA Bus

> >  CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n

> >  CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n

> > diff --git a/config/defconfig_arm64-dpaa2-linux-gcc

> > b/config/defconfig_arm64-dpaa2-linux-gcc

> > deleted file mode 120000

> > index 9a6c6c4cb..000000000

> > --- a/config/defconfig_arm64-dpaa2-linux-gcc

> > +++ /dev/null

> > @@ -1 +0,0 @@

> > -defconfig_arm64-dpaa2-linuxapp-gcc

> > \ No newline at end of file

> > diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst

> > b/doc/guides/cryptodevs/dpaa2_sec.rst

> > index 9e21d3169..55f0d6856 100644

> > --- a/doc/guides/cryptodevs/dpaa2_sec.rst

> > +++ b/doc/guides/cryptodevs/dpaa2_sec.rst

> > @@ -180,7 +180,7 @@ to enable DPAA2_SEC PMD.

> >  Please note that enabling debugging options may affect system

> performance.

> >

> >  * ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``)

> > -  By default it is only enabled in defconfig_arm64-dpaa2-* config.

> > +  By default it is only enabled in defconfig_arm64-dpaa-* config.

> >    Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.

> >

> >  Installations

> > @@ -191,7 +191,7 @@ following ``make`` command:

> >  .. code-block:: console

> >

> >     cd <DPDK-source-directory>

> > -   make config T=arm64-dpaa2-linux-gcc install

> > +   make config T=arm64-dpaa-linux-gcc install

> >

> >  Enabling logs

> >  -------------

> > diff --git a/doc/guides/eventdevs/dpaa2.rst

> > b/doc/guides/eventdevs/dpaa2.rst index a24a43c15..dd8ebbcd0 100644

> > --- a/doc/guides/eventdevs/dpaa2.rst

> > +++ b/doc/guides/eventdevs/dpaa2.rst

> > @@ -71,7 +71,7 @@ following ``make`` command:

> >  .. code-block:: console

> >

> >     cd <DPDK-source-directory>

> > -   make config T=arm64-dpaa2-linux-gcc install

> > +   make config T=arm64-dpaa-linux-gcc install

> >

> >  Initialization

> >  --------------

> > diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> > b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> > index 28a8e0920..e799b0ba4 100644

> > --- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> > +++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst

> > @@ -79,7 +79,7 @@ Copy the NUMA header files and lib to the cross

> compiler's directories:

> >

> >  Configure and cross compile DPDK Build

> >  --------------------------------------

> > -To configure a build, choose one of the target configurations, like arm64-

> dpaa2-linux-gcc and arm64-thunderx-linux-gcc.

> > +To configure a build, choose one of the target configurations, like arm64-

> dpaa-linux-gcc and arm64-thunderx-linux-gcc.

> >

> >  .. code-block:: console

> >

> > diff --git a/doc/guides/nics/build_and_test.rst

> > b/doc/guides/nics/build_and_test.rst

> > index aae5c111d..f99e019ff 100644

> > --- a/doc/guides/nics/build_and_test.rst

> > +++ b/doc/guides/nics/build_and_test.rst

> > @@ -35,7 +35,7 @@ Example output:

> >

> >     arm-armv7a-linux-gcc

> >     arm64-armv8a-linux-gcc

> > -   arm64-dpaa2-linux-gcc

> > +   arm64-dpaa-linux-gcc

> >     arm64-thunderx-linux-gcc

> >     arm64-xgene1-linux-gcc

> >     i686-native-linux-gcc

> > diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst index

> > f85920012..17839a920 100644

> > --- a/doc/guides/nics/dpaa.rst

> > +++ b/doc/guides/nics/dpaa.rst

> > @@ -201,14 +201,12 @@ Config File Options  The following options can

> > be modified in the ``config`` file.

> >  Please note that enabling debugging options may affect system

> performance.

> >

> > -- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``)

> > +- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``)

> >

> > -  By default it is enabled only for defconfig_arm64-dpaa-* config.

> >    Toggle compilation of the ``librte_bus_dpaa`` driver.

> >

> > -- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``)

> > +- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``)

> >

> > -  By default it is enabled only for defconfig_arm64-dpaa-* config.

> >    Toggle compilation of the ``librte_pmd_dpaa`` driver.

> >

> >  - ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``) @@ -222,12

> > +220,6 @@ Please note that enabling debugging options may affect system

> performance.

> >    Enables debugging of the Queue and Buffer Manager layer which

> interacts

> >    with the DPAA hardware.

> >

> > -- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``)

> > -

> > -  This is not a DPAA specific configuration - it is a generic RTE config.

> > -  For optimal performance and hardware utilization, it is expected

> > that DPAA

> > -  Mempool driver is used for mempools. For that, this configuration

> > needs to

> > -  enabled.

> >

> >  Environment Variables

> >  ~~~~~~~~~~~~~~~~~~~~~

> > diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst

> > index 99e4c8d72..b6d9e2129 100644

> > --- a/doc/guides/nics/dpaa2.rst

> > +++ b/doc/guides/nics/dpaa2.rst

> > @@ -441,21 +441,19 @@ Config File Options  The following options can

> > be modified in the ``config`` file.

> >  Please note that enabling debugging options may affect system

> performance.

> >

> > -- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``n``)

> > +- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``)

> >

> > -  By default it is enabled only for defconfig_arm64-dpaa2-* config.

> >    Toggle compilation of the ``librte_bus_fslmc`` driver.

> >

> > -- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``n``)

> > +- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``)

> >

> > -  By default it is enabled only for defconfig_arm64-dpaa2-* config.

> >    Toggle compilation of the ``librte_pmd_dpaa2`` driver.

> >

> >  - ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

> >

> >    Toggle display of debugging messages/logic

> >

> > -- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``)

> > +- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``)

> >

> >    Toggle to use physical address vs virtual address for hardware

> accelerators.

> >

> > diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst

> > b/doc/guides/rawdevs/dpaa2_cmdif.rst

> > index ac5f0f137..bcd603c81 100644

> > --- a/doc/guides/rawdevs/dpaa2_cmdif.rst

> > +++ b/doc/guides/rawdevs/dpaa2_cmdif.rst

> > @@ -77,7 +77,7 @@ following ``make`` command:

> >  .. code-block:: console

> >

> >     cd <DPDK-source-directory>

> > -   make config T=arm64-dpaa2-linux-gcc install

> > +   make config T=arm64-dpaa-linux-gcc install

> >

> >  Initialization

> >  --------------

> > diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst

> > b/doc/guides/rawdevs/dpaa2_qdma.rst

> > index 1550ca5ba..a5085c2c0 100644

> > --- a/doc/guides/rawdevs/dpaa2_qdma.rst

> > +++ b/doc/guides/rawdevs/dpaa2_qdma.rst

> > @@ -81,7 +81,7 @@ following ``make`` command:

> >  .. code-block:: console

> >

> >     cd <DPDK-source-directory>

> > -   make config T=arm64-dpaa2-linux-gcc install

> > +   make config T=arm64-dpaa-linux-gcc install

> >

> >  Initialization

> >  --------------

> > diff --git a/doc/guides/rel_notes/release_19_11.rst

> > b/doc/guides/rel_notes/release_19_11.rst

> > index ae8e7b2f0..27a17ede5 100644

> > --- a/doc/guides/rel_notes/release_19_11.rst

> > +++ b/doc/guides/rel_notes/release_19_11.rst

> > @@ -267,6 +267,8 @@ Removed Items

> >    * Quota and Watermark

> >    * vhost-scsi

> >

> > +* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for

> > +both

> > +  dpaa and dpaa2 platforms.

> 

> Thanks for the release notes update.

> We are just missing an empty line here.


[Hemant] ok
> 

> 

> >

> >  API Changes

> >  -----------

> > diff --git a/mk/machine/dpaa2/rte.vars.mk

> > b/mk/machine/dpaa2/rte.vars.mk deleted file mode 100644 index

> > aaa03c424..000000000

> > --- a/mk/machine/dpaa2/rte.vars.mk

> > +++ /dev/null

> > @@ -1,37 +0,0 @@

> > -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (c) 2016

> > Freescale Semiconductor, Inc. All rights reserved.

> > -# Copyright 2016 NXP

> > -

> > -#

> > -# machine:

> > -#

> > -#   - can define ARCH variable (overridden by cmdline value)

> > -#   - can define CROSS variable (overridden by cmdline value)

> > -#   - define MACHINE_CFLAGS variable (overridden by cmdline value)

> > -#   - define MACHINE_LDFLAGS variable (overridden by cmdline value)

> > -#   - define MACHINE_ASFLAGS variable (overridden by cmdline value)

> > -#   - can define CPU_CFLAGS variable (overridden by cmdline value) that

> > -#     overrides the one defined in arch.

> > -#   - can define CPU_LDFLAGS variable (overridden by cmdline value) that

> > -#     overrides the one defined in arch.

> > -#   - can define CPU_ASFLAGS variable (overridden by cmdline value) that

> > -#     overrides the one defined in arch.

> > -#   - may override any previously defined variable

> > -#

> > -

> > -# ARCH =

> > -# CROSS =

> > -# MACHINE_CFLAGS =

> > -# MACHINE_LDFLAGS =

> > -# MACHINE_ASFLAGS =

> > -# CPU_CFLAGS =

> > -# CPU_LDFLAGS =

> > -# CPU_ASFLAGS =

> > -MACHINE_CFLAGS += -march=armv8-a+crc

> > -

> > -ifdef CONFIG_RTE_ARCH_ARM_TUNE

> > -MACHINE_CFLAGS += -mtune=$(CONFIG_RTE_ARCH_ARM_TUNE:"%"=%)

> > -endif

> > -

> > -# To avoid TLS corruption issue.

> > -MACHINE_CFLAGS += -mtls-dialect=trad

> > --

> > 2.17.1

> >

> 

> 

> --

> David Marchand
diff mbox series

Patch

diff --git a/config/arm/arm64_dpaa2_linux_gcc b/config/arm/arm64_dpaa2_linux_gcc
deleted file mode 100644
index 0df8c8f7d..000000000
--- a/config/arm/arm64_dpaa2_linux_gcc
+++ /dev/null
@@ -1,16 +0,0 @@ 
-[binaries]
-c = 'aarch64-linux-gnu-gcc'
-cpp = 'aarch64-linux-gnu-cpp'
-ar = 'aarch64-linux-gnu-ar'
-as = 'aarch64-linux-gnu-as'
-strip = 'aarch64-linux-gnu-strip'
-pcap-config = ''
-
-[host_machine]
-system = 'linux'
-cpu_family = 'aarch64'
-cpu = 'armv8-a'
-endian = 'little'
-
-[properties]
-implementor_id = 'dpaa2'
diff --git a/config/arm/meson.build b/config/arm/meson.build
index d9f9811f7..f00aecd7e 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -49,12 +49,6 @@  flags_dpaa = [
 	['RTE_CACHE_LINE_SIZE', 64],
 	['RTE_MAX_NUMA_NODES', 1],
 	['RTE_MAX_LCORE', 16]]
-flags_dpaa2 = [
-	['RTE_MACHINE', '"dpaa2"'],
-	['RTE_USE_C11_MEM_MODEL', true],
-	['RTE_CACHE_LINE_SIZE', 64],
-	['RTE_MAX_NUMA_NODES', 1],
-	['RTE_MAX_LCORE', 16],
 	['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
 flags_armada = [
 	['RTE_MACHINE', '"armv8a"'],
@@ -115,7 +109,6 @@  impl_0x53 = ['Samsung', flags_generic, machine_args_generic]
 impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic]
 impl_0x69 = ['Intel', flags_generic, machine_args_generic]
 impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic]
-impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]
 
 dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
 
diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc
index 19614fb01..4ae4cd850 100644
--- a/config/defconfig_arm64-dpaa-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa-linuxapp-gcc
@@ -1,14 +1,15 @@ 
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2016 Freescale Semiconductor, Inc.
-# Copyright 2017 NXP
+# Copyright 2017-2019 NXP
 
 #include "defconfig_arm64-armv8a-linux-gcc"
 
-# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support
+# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support
+# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046)
+# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc)
+#
 CONFIG_RTE_MACHINE="dpaa"
 CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 
 #
 # Compile Environment Abstraction Layer
@@ -18,6 +19,13 @@  CONFIG_RTE_MAX_NUMA_NODES=1
 CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_PKTMBUF_HEADROOM=128
 
+# Doesn't support NUMA
+CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+CONFIG_RTE_LIBRTE_VHOST_NUMA=n
+
+# Enable PHY mode when using VM-VFIO target
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
+
 # NXP DPAA Bus
 CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
diff --git a/config/defconfig_arm64-dpaa2-linux-gcc b/config/defconfig_arm64-dpaa2-linux-gcc
deleted file mode 120000
index 9a6c6c4cb..000000000
--- a/config/defconfig_arm64-dpaa2-linux-gcc
+++ /dev/null
@@ -1 +0,0 @@ 
-defconfig_arm64-dpaa2-linuxapp-gcc
\ No newline at end of file
diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst
index 9e21d3169..55f0d6856 100644
--- a/doc/guides/cryptodevs/dpaa2_sec.rst
+++ b/doc/guides/cryptodevs/dpaa2_sec.rst
@@ -180,7 +180,7 @@  to enable DPAA2_SEC PMD.
 Please note that enabling debugging options may affect system performance.
 
 * ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``)
-  By default it is only enabled in defconfig_arm64-dpaa2-* config.
+  By default it is only enabled in defconfig_arm64-dpaa-* config.
   Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.
 
 Installations
@@ -191,7 +191,7 @@  following ``make`` command:
 .. code-block:: console
 
    cd <DPDK-source-directory>
-   make config T=arm64-dpaa2-linux-gcc install
+   make config T=arm64-dpaa-linux-gcc install
 
 Enabling logs
 -------------
diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst
index a24a43c15..dd8ebbcd0 100644
--- a/doc/guides/eventdevs/dpaa2.rst
+++ b/doc/guides/eventdevs/dpaa2.rst
@@ -71,7 +71,7 @@  following ``make`` command:
 .. code-block:: console
 
    cd <DPDK-source-directory>
-   make config T=arm64-dpaa2-linux-gcc install
+   make config T=arm64-dpaa-linux-gcc install
 
 Initialization
 --------------
diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
index 28a8e0920..e799b0ba4 100644
--- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
+++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
@@ -79,7 +79,7 @@  Copy the NUMA header files and lib to the cross compiler's directories:
 
 Configure and cross compile DPDK Build
 --------------------------------------
-To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc.
+To configure a build, choose one of the target configurations, like arm64-dpaa-linux-gcc and arm64-thunderx-linux-gcc.
 
 .. code-block:: console
 
diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst
index aae5c111d..f99e019ff 100644
--- a/doc/guides/nics/build_and_test.rst
+++ b/doc/guides/nics/build_and_test.rst
@@ -35,7 +35,7 @@  Example output:
 
    arm-armv7a-linux-gcc
    arm64-armv8a-linux-gcc
-   arm64-dpaa2-linux-gcc
+   arm64-dpaa-linux-gcc
    arm64-thunderx-linux-gcc
    arm64-xgene1-linux-gcc
    i686-native-linux-gcc
diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index f85920012..17839a920 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -201,14 +201,12 @@  Config File Options
 The following options can be modified in the ``config`` file.
 Please note that enabling debugging options may affect system performance.
 
-- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``)
 
-  By default it is enabled only for defconfig_arm64-dpaa-* config.
   Toggle compilation of the ``librte_bus_dpaa`` driver.
 
-- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``)
 
-  By default it is enabled only for defconfig_arm64-dpaa-* config.
   Toggle compilation of the ``librte_pmd_dpaa`` driver.
 
 - ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``)
@@ -222,12 +220,6 @@  Please note that enabling debugging options may affect system performance.
   Enables debugging of the Queue and Buffer Manager layer which interacts
   with the DPAA hardware.
 
-- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``)
-
-  This is not a DPAA specific configuration - it is a generic RTE config.
-  For optimal performance and hardware utilization, it is expected that DPAA
-  Mempool driver is used for mempools. For that, this configuration needs to
-  enabled.
 
 Environment Variables
 ~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index 99e4c8d72..b6d9e2129 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst
@@ -441,21 +441,19 @@  Config File Options
 The following options can be modified in the ``config`` file.
 Please note that enabling debugging options may affect system performance.
 
-- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``)
 
-  By default it is enabled only for defconfig_arm64-dpaa2-* config.
   Toggle compilation of the ``librte_bus_fslmc`` driver.
 
-- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``)
 
-  By default it is enabled only for defconfig_arm64-dpaa2-* config.
   Toggle compilation of the ``librte_pmd_dpaa2`` driver.
 
 - ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
 
   Toggle display of debugging messages/logic
 
-- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``)
+- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``)
 
   Toggle to use physical address vs virtual address for hardware accelerators.
 
diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst
index ac5f0f137..bcd603c81 100644
--- a/doc/guides/rawdevs/dpaa2_cmdif.rst
+++ b/doc/guides/rawdevs/dpaa2_cmdif.rst
@@ -77,7 +77,7 @@  following ``make`` command:
 .. code-block:: console
 
    cd <DPDK-source-directory>
-   make config T=arm64-dpaa2-linux-gcc install
+   make config T=arm64-dpaa-linux-gcc install
 
 Initialization
 --------------
diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst b/doc/guides/rawdevs/dpaa2_qdma.rst
index 1550ca5ba..a5085c2c0 100644
--- a/doc/guides/rawdevs/dpaa2_qdma.rst
+++ b/doc/guides/rawdevs/dpaa2_qdma.rst
@@ -81,7 +81,7 @@  following ``make`` command:
 .. code-block:: console
 
    cd <DPDK-source-directory>
-   make config T=arm64-dpaa2-linux-gcc install
+   make config T=arm64-dpaa-linux-gcc install
 
 Initialization
 --------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index ae8e7b2f0..27a17ede5 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -267,6 +267,8 @@  Removed Items
   * Quota and Watermark
   * vhost-scsi
 
+* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both
+  dpaa and dpaa2 platforms.
 
 API Changes
 -----------
diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk
deleted file mode 100644
index aaa03c424..000000000
--- a/mk/machine/dpaa2/rte.vars.mk
+++ /dev/null
@@ -1,37 +0,0 @@ 
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
-# Copyright 2016 NXP
-
-#
-# machine:
-#
-#   - can define ARCH variable (overridden by cmdline value)
-#   - can define CROSS variable (overridden by cmdline value)
-#   - define MACHINE_CFLAGS variable (overridden by cmdline value)
-#   - define MACHINE_LDFLAGS variable (overridden by cmdline value)
-#   - define MACHINE_ASFLAGS variable (overridden by cmdline value)
-#   - can define CPU_CFLAGS variable (overridden by cmdline value) that
-#     overrides the one defined in arch.
-#   - can define CPU_LDFLAGS variable (overridden by cmdline value) that
-#     overrides the one defined in arch.
-#   - can define CPU_ASFLAGS variable (overridden by cmdline value) that
-#     overrides the one defined in arch.
-#   - may override any previously defined variable
-#
-
-# ARCH =
-# CROSS =
-# MACHINE_CFLAGS =
-# MACHINE_LDFLAGS =
-# MACHINE_ASFLAGS =
-# CPU_CFLAGS =
-# CPU_LDFLAGS =
-# CPU_ASFLAGS =
-MACHINE_CFLAGS += -march=armv8-a+crc
-
-ifdef CONFIG_RTE_ARCH_ARM_TUNE
-MACHINE_CFLAGS += -mtune=$(CONFIG_RTE_ARCH_ARM_TUNE:"%"=%)
-endif
-
-# To avoid TLS corruption issue.
-MACHINE_CFLAGS += -mtls-dialect=trad