| Message ID | 20191114133023.32185-8-dmurphy@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Thu 2019-11-14 07:30:11, Dan Murphy wrote: > Update the document to be consistent in case when using "LED". > This acronym should be capital throughout the document. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index 1b66a413fb9d..bfe2805c5534 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,4 +1,4 @@ -Binding for TI/National Semiconductor LP55xx Led Drivers +Binding for TI/National Semiconductor LP55xx LED Drivers Required properties: - compatible: one of @@ -12,8 +12,8 @@ Required properties: - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) Each child has own specific current settings -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) -- max-cur: Maximun current at each led channel. +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected) +- max-cur: Maximun current at each LED channel. Optional properties: - enable-gpio: GPIO attached to the chip's enable pin
Update the document to be consistent in case when using "LED". This acronym should be capital throughout the document. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) -- 2.22.0.214.g8dca754b1e