diff mbox series

[v4,3/8] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000

Message ID 20191123203759.20708-4-afaerber@suse.de
State Accepted
Commit 517a77d07c3940074e4d926c8824e74e27881bdc
Headers show
Series [v4,1/8] dt-bindings: arm: realtek: Add RTD1195 and MeLE X1000 | expand

Commit Message

Andreas Färber Nov. 23, 2019, 8:37 p.m. UTC 
Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.

Reuse the existing RTD1295 watchdog compatible for now.

Reviewed-by: Rob Herring <robh@kernel.org>

[AF: Fixed r-bus size, fixed GIC, updated memreserve & memory]
Signed-off-by: Andreas Färber <afaerber@suse.de>

---
 v3 -> v4:
 * Inserted /memory reg entry to compensate reduced r-bus size (James)
 * Extended GIC reg and added interrupt (Marc)
 * Added comments to /memory node
 
 v2 -> v3:
 * Fixed r-bus size in /soc ranges from 0x1000000 to 0x70000 (James)
 * Adjusted /memreserve/ to close gap from 0xa800 to 0xc000 for full 0x100000
 * Changed arch timer from GIC_CPU_MASK_RAW(0xf) to GIC_CPU_MASK_SIMPLE(2)
   squashed from RTD1395 v1 series
 
 v1 -> v2:
 * Dropped /memreserve/ and reserved-memory nodes for peripherals and NOR (Rob)
 * Carved them out from memory reg instead (Rob)
 * Converted some /memreserve/s to reserved-memory nodes
 
 arch/arm/boot/dts/Makefile               |   2 +
 arch/arm/boot/dts/rtd1195-mele-x1000.dts |  32 ++++++++
 arch/arm/boot/dts/rtd1195.dtsi           | 130 +++++++++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
 create mode 100644 arch/arm/boot/dts/rtd1195.dtsi

-- 
2.16.4
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..4853a13c8cf2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -865,6 +865,8 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-mele-x1000.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..e2050cb64474
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "mele,x1000", "realtek,rtd1195";
+	model = "MeLE X1000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x18000000>, /* up to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..c5713a5ef472
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "realtek,rtd1195";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@b000 {
+			reg = <0x0000b000 0x1000>;
+		};
+
+		audio@1b00000 {
+			reg = <0x01b00000 0x400000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x01ffe000 0x4000>;
+		};
+
+		secure@10000000 {
+			reg = <0x10000000 0x100000>;
+			no-map;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <27000000>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x18000000 0x18000000 0x00070000>,
+			 <0x18100000 0x18100000 0x01000000>,
+			 <0x80000000 0x80000000 0x80000000>;
+
+		wdt: watchdog@18007680 {
+			compatible = "realtek,rtd1295-watchdog";
+			reg = <0x18007680 0x100>;
+			clocks = <&osc27M>;
+		};
+
+		uart0: serial@18007800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18007800 0x400>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <27000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@1801b200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1801b200 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <27000000>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};