diff mbox series

[1/2] phy: qcom-qmp: Add MSM8996 UFS QMP support

Message ID 20191207202147.2314248-2-bjorn.andersson@linaro.org
State Accepted
Commit 0347f0dcbd2f0ed3335e1e1bb908534c3e05d7f2
Headers show
Series [1/2] phy: qcom-qmp: Add MSM8996 UFS QMP support | expand

Commit Message

Bjorn Andersson Dec. 7, 2019, 8:21 p.m. UTC
The support for the 14nm MSM8996 UFS PHY is currently handled by the
UFS-specific 14nm QMP driver, due to the earlier need for additional
operations beyond the standard PHY API.

Add support for this PHY to the common QMP driver, to allow us to remove
the old driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 .../devicetree/bindings/phy/qcom-qmp-phy.txt  |   5 +
 drivers/phy/qualcomm/phy-qcom-qmp.c           | 106 ++++++++++++++++++
 2 files changed, 111 insertions(+)

-- 
2.24.0
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index eac9ad3cbbc8..5b99cf081817 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -8,6 +8,7 @@  Required properties:
  - compatible: compatible list, contains:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
+	       "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
 	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
 	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
@@ -44,6 +45,8 @@  Required properties:
 		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,msm8996-qmp-ufs-phy" must contain:
+			"ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8998-qmp-usb3-phy" must contain:
@@ -72,6 +75,8 @@  Required properties:
 			"phy", "common".
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-ufs-phy": must contain:
+			"ufsphy".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 			"phy", "common".
 		For "qcom,msm8998-qmp-usb3-phy" must contain
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index a6b8fc5798e2..d81516c4d747 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -121,6 +121,11 @@  enum qphy_reg_layout {
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 };
 
+static const unsigned int msm8996_ufsphy_regs_layout[] = {
+	[QPHY_START_CTRL]		= 0x00,
+	[QPHY_PCS_READY_STATUS]		= 0x168,
+};
+
 static const unsigned int pciephy_regs_layout[] = {
 	[QPHY_COM_SW_RESET]		= 0x400,
 	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
@@ -330,6 +335,75 @@  static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
 };
 
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
 static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1122,6 +1196,10 @@  static const char * const msm8996_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref",
 };
 
+static const char * const msm8996_ufs_phy_clk_l[] = {
+	"ref",
+};
+
 static const char * const qmp_v3_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "com_aux",
 };
@@ -1175,6 +1253,31 @@  static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 1,
+
+	.serdes_tbl		= msm8996_ufs_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+	.tx_tbl			= msm8996_ufs_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufs_tx_tbl),
+	.rx_tbl			= msm8996_ufs_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+	.clk_list		= msm8996_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+
+	.regs			= msm8996_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.no_pcs_sw_reset	= true,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -2091,6 +2194,9 @@  static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	{
 		.compatible = "qcom,msm8996-qmp-pcie-phy",
 		.data = &msm8996_pciephy_cfg,
+	}, {
+		.compatible = "qcom,msm8996-qmp-ufs-phy",
+		.data = &msm8996_ufs_cfg,
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,