| Message ID | 1576850160-1564-1-git-send-email-loic.poulain@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: Add qcom Kconfig fragment | expand |
On Fri, Dec 20, 2019 at 02:56:00PM +0100, Loic Poulain wrote: > Add qcom Kconfig fragment which enables the appropriate symbols for > support of Qualcomm based boards, like the 'popular' dragonboards. > This permits to fully support the boards upstream without having to > rely on downstream deconfig changes. > > This patch has been tested with Dragonboard-410c and Dragonboard-820c. > > qcom.config fragment has been generated with ./script/diffconfig > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Please add these to defconfig (and make sure they don't break the single kernel image). NAK for this patch. -- Catalin
On Fri, Dec 20, 2019 at 02:56:00PM +0100, Loic Poulain wrote: > Add qcom Kconfig fragment which enables the appropriate symbols for > support of Qualcomm based boards, like the 'popular' dragonboards. > This permits to fully support the boards upstream without having to > rely on downstream deconfig changes. > > This patch has been tested with Dragonboard-410c and Dragonboard-820c. > > qcom.config fragment has been generated with ./script/diffconfig > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > --- > arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 arch/arm64/configs/qcom.config > > diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config > new file mode 100644 > index 0000000..9358df8 > --- /dev/null > +++ b/arch/arm64/configs/qcom.config > @@ -0,0 +1,57 @@ > +CONFIG_ARM_QCOM_CPUFREQ_HW=y > +CONFIG_BT_HCIUART_3WIRE=y > +CONFIG_BT_HCIUART_QCA=y > +CONFIG_BT_HCIUART_RTL=y > +CONFIG_CRYPTO_DEV_QCOM_RNG=y > +CONFIG_EXTCON_QCOM_SPMI_MISC=y > +CONFIG_INTERCONNECT=y > +CONFIG_MFD_QCOM_RPM=y > +CONFIG_PHY_QCOM_PCIE2=y > +CONFIG_PHY_QCOM_QMP=y > +CONFIG_PHY_QCOM_QUSB2=y > +CONFIG_PHY_QCOM_UFS=y > +CONFIG_PM8916_WATCHDOG=y > +CONFIG_POWER_RESET_QCOM_PON=y > +CONFIG_QCOM_APR=m > +CONFIG_QCOM_FASTRPC=y > +CONFIG_QCOM_RMTFS_MEM=m > +CONFIG_QCOM_RPMHPD=y > +CONFIG_QCOM_RPMPD=y > +CONFIG_QCOM_SOCINFO=m > +CONFIG_QCOM_WCNSS_CTRL=m > +CONFIG_QCOM_WCNSS_PIL=m > +CONFIG_SCSI_UFS_QCOM=y > +CONFIG_SND_SOC_CROS_EC_CODEC=m > +CONFIG_SND_SOC_MAX98927=m > +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > +CONFIG_VIDEO_QCOM_CAMSS=m > +CONFIG_VIDEO_QCOM_VENUS=m > +CONFIG_WCN36XX=m > +CONFIG_BT_QCA=m > +CONFIG_BT_QCOMSMD=m > +CONFIG_INTERCONNECT_QCOM=y > +CONFIG_INTERCONNECT_QCOM_MSM8974=y msm8974 is arm32 and should be dropped. Brian
On Fri 20 Dec 05:56 PST 2019, Loic Poulain wrote: > Add qcom Kconfig fragment which enables the appropriate symbols for > support of Qualcomm based boards, like the 'popular' dragonboards. > This permits to fully support the boards upstream without having to > rely on downstream deconfig changes. > > This patch has been tested with Dragonboard-410c and Dragonboard-820c. > As Catalin said, this should be added to the generic defconfig. I have a few of these queued up already for v5.6 in linux-next, but please do send me additional patches and I'll include them in the qcom/defconfig branch. > qcom.config fragment has been generated with ./script/diffconfig > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > --- > arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 arch/arm64/configs/qcom.config > > diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config > new file mode 100644 > index 0000000..9358df8 > --- /dev/null > +++ b/arch/arm64/configs/qcom.config > @@ -0,0 +1,57 @@ > +CONFIG_ARM_QCOM_CPUFREQ_HW=y > +CONFIG_BT_HCIUART_3WIRE=y > +CONFIG_BT_HCIUART_QCA=y > +CONFIG_BT_HCIUART_RTL=y > +CONFIG_CRYPTO_DEV_QCOM_RNG=y =m > +CONFIG_EXTCON_QCOM_SPMI_MISC=y > +CONFIG_INTERCONNECT=y > +CONFIG_MFD_QCOM_RPM=y This is for 32-bit targets. > +CONFIG_PHY_QCOM_PCIE2=y =m > +CONFIG_PHY_QCOM_QMP=y =m > +CONFIG_PHY_QCOM_QUSB2=y =m > +CONFIG_PHY_QCOM_UFS=y I recently proposed a patch to add 8996 UFS support to the common QMP driver, so hopefully we can get that merged for v5.6 instead. > +CONFIG_PM8916_WATCHDOG=y =m > +CONFIG_POWER_RESET_QCOM_PON=y =m > +CONFIG_QCOM_APR=m > +CONFIG_QCOM_FASTRPC=y =m > +CONFIG_QCOM_RMTFS_MEM=m > +CONFIG_QCOM_RPMHPD=y > +CONFIG_QCOM_RPMPD=y > +CONFIG_QCOM_SOCINFO=m > +CONFIG_QCOM_WCNSS_CTRL=m > +CONFIG_QCOM_WCNSS_PIL=m > +CONFIG_SCSI_UFS_QCOM=y =m > +CONFIG_SND_SOC_CROS_EC_CODEC=m > +CONFIG_SND_SOC_MAX98927=m > +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > +CONFIG_VIDEO_QCOM_CAMSS=m > +CONFIG_VIDEO_QCOM_VENUS=m > +CONFIG_WCN36XX=m > +CONFIG_BT_QCA=m > +CONFIG_BT_QCOMSMD=m > +CONFIG_INTERCONNECT_QCOM=y > +CONFIG_INTERCONNECT_QCOM_MSM8974=y > +CONFIG_INTERCONNECT_QCOM_QCS404=y > +CONFIG_INTERCONNECT_QCOM_SDM845=y > +CONFIG_INTERCONNECT_QCOM_SMD_RPM=y Selected as needed by previous options. > +CONFIG_PHY_QCOM_UFS_14NM=y Follows CONFIG_PHY_QCOM_UFS, and should be replaced by CONFIG_PHY_QCOM_QMP > +CONFIG_QCOM_CLK_RPM=y > +CONFIG_REGULATOR_QCOM_RPM=y These two are for 32-bit targets. Regards, Bjorn > +CONFIG_SND_COMPRESS_OFFLOAD=y > +CONFIG_SND_SOC_COMPRESS=y > +CONFIG_SND_SOC_MSM8996=m > +CONFIG_SND_SOC_QCOM_COMMON=m > +CONFIG_SND_SOC_QDSP6=m > +CONFIG_SND_SOC_QDSP6_ADM=m > +CONFIG_SND_SOC_QDSP6_AFE=m > +CONFIG_SND_SOC_QDSP6_AFE_DAI=m > +CONFIG_SND_SOC_QDSP6_ASM=m > +CONFIG_SND_SOC_QDSP6_ASM_DAI=m > +CONFIG_SND_SOC_QDSP6_COMMON=m > +CONFIG_SND_SOC_QDSP6_CORE=m > +CONFIG_SND_SOC_QDSP6_ROUTING=m > +CONFIG_SND_SOC_RT5663=m > +CONFIG_SND_SOC_SDM845=m > +CONFIG_VIDEOBUF2_DMA_SG=m > +CONFIG_WCN36XX_DEBUGFS=y > -- > 2.7.4 >
diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config new file mode 100644 index 0000000..9358df8 --- /dev/null +++ b/arch/arm64/configs/qcom.config @@ -0,0 +1,57 @@ +CONFIG_ARM_QCOM_CPUFREQ_HW=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIUART_RTL=y +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_EXTCON_QCOM_SPMI_MISC=y +CONFIG_INTERCONNECT=y +CONFIG_MFD_QCOM_RPM=y +CONFIG_PHY_QCOM_PCIE2=y +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_QUSB2=y +CONFIG_PHY_QCOM_UFS=y +CONFIG_PM8916_WATCHDOG=y +CONFIG_POWER_RESET_QCOM_PON=y +CONFIG_QCOM_APR=m +CONFIG_QCOM_FASTRPC=y +CONFIG_QCOM_RMTFS_MEM=m +CONFIG_QCOM_RPMHPD=y +CONFIG_QCOM_RPMPD=y +CONFIG_QCOM_SOCINFO=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_QCOM_WCNSS_PIL=m +CONFIG_SCSI_UFS_QCOM=y +CONFIG_SND_SOC_CROS_EC_CODEC=m +CONFIG_SND_SOC_MAX98927=m +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m +CONFIG_VIDEO_QCOM_CAMSS=m +CONFIG_VIDEO_QCOM_VENUS=m +CONFIG_WCN36XX=m +CONFIG_BT_QCA=m +CONFIG_BT_QCOMSMD=m +CONFIG_INTERCONNECT_QCOM=y +CONFIG_INTERCONNECT_QCOM_MSM8974=y +CONFIG_INTERCONNECT_QCOM_QCS404=y +CONFIG_INTERCONNECT_QCOM_SDM845=y +CONFIG_INTERCONNECT_QCOM_SMD_RPM=y +CONFIG_PHY_QCOM_UFS_14NM=y +CONFIG_QCOM_CLK_RPM=y +CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_SOC_COMPRESS=y +CONFIG_SND_SOC_MSM8996=m +CONFIG_SND_SOC_QCOM_COMMON=m +CONFIG_SND_SOC_QDSP6=m +CONFIG_SND_SOC_QDSP6_ADM=m +CONFIG_SND_SOC_QDSP6_AFE=m +CONFIG_SND_SOC_QDSP6_AFE_DAI=m +CONFIG_SND_SOC_QDSP6_ASM=m +CONFIG_SND_SOC_QDSP6_ASM_DAI=m +CONFIG_SND_SOC_QDSP6_COMMON=m +CONFIG_SND_SOC_QDSP6_CORE=m +CONFIG_SND_SOC_QDSP6_ROUTING=m +CONFIG_SND_SOC_RT5663=m +CONFIG_SND_SOC_SDM845=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_WCN36XX_DEBUGFS=y
Add qcom Kconfig fragment which enables the appropriate symbols for support of Qualcomm based boards, like the 'popular' dragonboards. This permits to fully support the boards upstream without having to rely on downstream deconfig changes. This patch has been tested with Dragonboard-410c and Dragonboard-820c. qcom.config fragment has been generated with ./script/diffconfig Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 arch/arm64/configs/qcom.config -- 2.7.4