@@ -542,72 +542,6 @@ static struct dsiescclk dsiescclk[3] = {
}
};
-
-/*
-* Used by MCDE to setup all necessary PRCMU registers
-*/
-#define PRCMU_RESET_DSIPLL 0x00004000
-#define PRCMU_UNCLAMP_DSIPLL 0x00400800
-
-#define PRCMU_CLK_PLL_DIV_SHIFT 0
-#define PRCMU_CLK_PLL_SW_SHIFT 5
-#define PRCMU_CLK_38 (1 << 9)
-#define PRCMU_CLK_38_SRC (1 << 10)
-#define PRCMU_CLK_38_DIV (1 << 11)
-
-/* D=101, N=1, R=4, SELDIV2=0 */
-#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
-
-#define PRCMU_ENABLE_PLLDSI 0x00000001
-#define PRCMU_DISABLE_PLLDSI 0x00000000
-#define PRCMU_RELEASE_RESET_DSS 0x0000400C
-#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
-/* ESC clk, div0=1, div1=1, div2=3 */
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
-#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
-#define PRCMU_DSI_RESET_SW 0x00000007
-
-#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
-
-int db8500_prcmu_enable_dsipll(void)
-{
- int i;
-
- /* Clear DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
- /* Unclamp DSIPLL in/out */
- writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
-
- /* Set DSI PLL FREQ */
- writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
- writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
- /* Enable Escape clocks */
- writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
-
- /* Start DSI PLL */
- writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
- /* Reset DSI PLL */
- writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
- for (i = 0; i < 10; i++) {
- if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
- == PRCMU_PLLDSI_LOCKP_LOCKED)
- break;
- udelay(100);
- }
- /* Set DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
- return 0;
-}
-
-int db8500_prcmu_disable_dsipll(void)
-{
- /* Disable dsi pll */
- writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
- /* Disable escapeclock */
- writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
- return 0;
-}
-
u32 db8500_prcmu_read(unsigned int reg)
{
return readl(prcmu_base + reg);
@@ -525,8 +525,6 @@ u8 db8500_prcmu_get_power_state_result(void);
void db8500_prcmu_enable_wakeups(u32 wakeups);
int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
int db8500_prcmu_request_clock(u8 clock, bool enable);
-int db8500_prcmu_disable_dsipll(void);
-int db8500_prcmu_enable_dsipll(void);
void db8500_prcmu_config_abb_event_readout(u32 abb_events);
void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
int db8500_prcmu_config_esram0_deep_sleep(u8 state);
@@ -681,16 +679,6 @@ static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
return 0;
}
-static inline int db8500_prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int db8500_prcmu_enable_dsipll(void)
-{
- return 0;
-}
-
static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
{
return 0;
@@ -321,16 +321,6 @@ static inline bool prcmu_is_ac_wake_requested(void)
return db8500_prcmu_is_ac_wake_requested();
}
-static inline int prcmu_disable_dsipll(void)
-{
- return db8500_prcmu_disable_dsipll();
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
- return db8500_prcmu_enable_dsipll();
-}
-
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
return db8500_prcmu_config_esram0_deep_sleep(state);
@@ -506,16 +496,6 @@ static inline bool prcmu_is_ac_wake_requested(void)
return false;
}
-static inline int prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
- return 0;
-}
-
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
return 0;
The DSI PLLs are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/mfd/db8500-prcmu.c | 66 -------------------------------- include/linux/mfd/db8500-prcmu.h | 12 ------ include/linux/mfd/dbx500-prcmu.h | 20 ---------- 3 files changed, 98 deletions(-) -- 2.21.0