[5.4,299/434] cpufreq: Register drivers only after CPU devices have been registered

Message ID 20191229172721.812455633@linuxfoundation.org
State New
Headers show
  • Untitled series #25985
Related show

Commit Message

Greg Kroah-Hartman Dec. 29, 2019, 5:25 p.m.
From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 46770be0cf94149ca48be87719bda1d951066644 ]

The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.

This happens due to following sequence of events:

- cpufreq_register_driver()
  - subsys_interface_register()
  - return 0; //successful registration of driver

... at a later point of time

- register_cpu();
  - device_register();
    - bus_probe_device();
      - sif->add_dev();
	- cpufreq_add_dev();
	  - get_cpu_device(); //FAILS
  - per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
  - return 0; //CPU registered successfully

Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.

This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Tested-by: Amit Kucheria <amit.kucheria@linaro.org>

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>

 drivers/cpufreq/cpufreq.c | 7 +++++++
 1 file changed, 7 insertions(+)



diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index bc19d6c16aaa..a7db4f22a077 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2634,6 +2634,13 @@  int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	if (cpufreq_disabled())
 		return -ENODEV;
+	/*
+	 * The cpufreq core depends heavily on the availability of device
+	 * structure, make sure they are available before proceeding further.
+	 */
+	if (!get_cpu_device(0))
+		return -EPROBE_DEFER;
 	if (!driver_data || !driver_data->verify || !driver_data->init ||
 	    !(driver_data->setpolicy || driver_data->target_index ||
 		    driver_data->target) ||