diff mbox

common: board_f: Fix build error when CONFIG_TRACE is not defined

Message ID 51DA2DAC.9010103@linaro.org
State New
Headers show

Commit Message

Tushar Behera July 8, 2013, 3:10 a.m. UTC 
On 07/06/2013 01:27 AM, Simon Glass wrote:
> Hi Tushar,
> 
> On Fri, Jul 5, 2013 at 1:40 AM, Tushar Behera <tushar.behera@linaro.org>wrote:
> 
>> When CONFIG_TRACE is not defined, definition of trace_early_init is not
>> compiled and we get following error.
>>
>> common/libcommon.o:(.data.init_sequence_f+0xc): undefined reference to
>> `trace_early_init'
>>
>> While at it, also define reserve_trace only if CONFIG_TRACE is defined.
>>
>> CC: Simon Glass <sjg@chromium.org>
>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
>> ---
>>  common/board_f.c |    8 ++++++--
>>  1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/common/board_f.c b/common/board_f.c
>> index ab4242a..a685368 100644
>> --- a/common/board_f.c
>> +++ b/common/board_f.c
>> @@ -501,17 +501,17 @@ static int reserve_lcd(void)
>>  }
>>  #endif /* CONFIG_LCD */
>>
>> +#ifdef CONFIG_TRACE
>>  static int reserve_trace(void)
>>  {
>> -#ifdef CONFIG_TRACE
>>         gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
>>         gd->trace_buff = map_sysmem(gd->relocaddr,
>> CONFIG_TRACE_BUFFER_SIZE);
>>         debug("Reserving %dk for trace data at: %08lx\n",
>>               CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
>> -#endif
>>
>>         return 0;
>>  }
>> +#endif
>>
>>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
>> defined(CONFIG_8xx)) \
>>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
>> @@ -833,7 +833,9 @@ static init_fnc_t init_sequence_f[] = {
>>  #endif
>>         setup_mon_len,
>>         setup_fdt,
>> +#ifdef CONFIG_TRACE
>>         trace_early_init,
>> +#endif
>>  #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
>>         /* TODO: can this go into arch_cpu_init()? */
>>         probecpu,
>> @@ -977,7 +979,9 @@ static init_fnc_t init_sequence_f[] = {
>>  #ifdef CONFIG_LCD
>>         reserve_lcd,
>>  #endif
>> +#ifdef CONFIG_TRACE
>>         reserve_trace,
>> +#endif
>>         /* TODO: Why the dependency on CONFIG_8xx? */
>>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
>> defined(CONFIG_8xx)) \
>>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
>>
> 
> Does the static inline not work for you? What toolchain are you using? I
> assume this is ARM?
> 

I was testing on EXYNOS5250 using 4.7.3 toolchain.

My mistake: while testing this patch, I had disabled CONFIG_TRACE, but
CONFIG_TRACE_EARLY was still enabled, hence the error. You may ignore
the patch.

IMHO, we should define the TRACE related config options only if TRACE is
enabled. If that is ok for you, I will submit a patch for that.

> Simon
>

Comments

Simon Glass July 20, 2013, 7:41 p.m. UTC | #1 
Hi,

On Sun, Jul 7, 2013 at 9:10 PM, Tushar Behera <tushar.behera@linaro.org>wrote:

> On 07/06/2013 01:27 AM, Simon Glass wrote:
> > Hi Tushar,
> >
> > On Fri, Jul 5, 2013 at 1:40 AM, Tushar Behera <tushar.behera@linaro.org
> >wrote:
> >
> >> When CONFIG_TRACE is not defined, definition of trace_early_init is not
> >> compiled and we get following error.
> >>
> >> common/libcommon.o:(.data.init_sequence_f+0xc): undefined reference to
> >> `trace_early_init'
> >>
> >> While at it, also define reserve_trace only if CONFIG_TRACE is defined.
> >>
> >> CC: Simon Glass <sjg@chromium.org>
> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
> >> ---
> >>  common/board_f.c |    8 ++++++--
> >>  1 file changed, 6 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/common/board_f.c b/common/board_f.c
> >> index ab4242a..a685368 100644
> >> --- a/common/board_f.c
> >> +++ b/common/board_f.c
> >> @@ -501,17 +501,17 @@ static int reserve_lcd(void)
> >>  }
> >>  #endif /* CONFIG_LCD */
> >>
> >> +#ifdef CONFIG_TRACE
> >>  static int reserve_trace(void)
> >>  {
> >> -#ifdef CONFIG_TRACE
> >>         gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
> >>         gd->trace_buff = map_sysmem(gd->relocaddr,
> >> CONFIG_TRACE_BUFFER_SIZE);
> >>         debug("Reserving %dk for trace data at: %08lx\n",
> >>               CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
> >> -#endif
> >>
> >>         return 0;
> >>  }
> >> +#endif
> >>
> >>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
> >> defined(CONFIG_8xx)) \
> >>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
> >> @@ -833,7 +833,9 @@ static init_fnc_t init_sequence_f[] = {
> >>  #endif
> >>         setup_mon_len,
> >>         setup_fdt,
> >> +#ifdef CONFIG_TRACE
> >>         trace_early_init,
> >> +#endif
> >>  #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
> >>         /* TODO: can this go into arch_cpu_init()? */
> >>         probecpu,
> >> @@ -977,7 +979,9 @@ static init_fnc_t init_sequence_f[] = {
> >>  #ifdef CONFIG_LCD
> >>         reserve_lcd,
> >>  #endif
> >> +#ifdef CONFIG_TRACE
> >>         reserve_trace,
> >> +#endif
> >>         /* TODO: Why the dependency on CONFIG_8xx? */
> >>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
> >> defined(CONFIG_8xx)) \
> >>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
> >>
> >
> > Does the static inline not work for you? What toolchain are you using? I
> > assume this is ARM?
> >
>
> I was testing on EXYNOS5250 using 4.7.3 toolchain.
>
> My mistake: while testing this patch, I had disabled CONFIG_TRACE, but
> CONFIG_TRACE_EARLY was still enabled, hence the error. You may ignore
> the patch.
>
> IMHO, we should define the TRACE related config options only if TRACE is
> enabled. If that is ok for you, I will submit a patch for that.
>

I'm not sure it matters. The idea is that you can build U-Boot with 'make
FTRACE=1' and get tracing enabled, without having to modify the config
files.

Tracing IMO is something you turn on and off while developing, rather than
a board option. I didn't come up with a good way of enabling it globally
(since we need things like buffer size and the early trace address) but if
we could make it a 'make' option instead of a board option, that would be
my preference.



> --- a/include/configs/exynos5250-dt.h
> +++ b/include/configs/exynos5250-dt.h
> @@ -45,11 +45,13 @@
>
>  /* Allow tracing to be enabled */
>  #define CONFIG_TRACE
> +#ifdef CONFIG_TRACE
>  #define CONFIG_CMD_TRACE
>  #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
>  #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
>  #define CONFIG_TRACE_EARLY
>  #define CONFIG_TRACE_EARLY_ADDR                0x50000000
> +#endif
>

Regards,
Simon
Simon Glass July 21, 2013, 1:32 a.m. UTC | #2 
Hi Tushar,

On Sat, Jul 20, 2013 at 1:41 PM, Simon Glass <sjg@chromium.org> wrote:

> Hi,
>
> On Sun, Jul 7, 2013 at 9:10 PM, Tushar Behera <tushar.behera@linaro.org>wrote:
>
>> On 07/06/2013 01:27 AM, Simon Glass wrote:
>> > Hi Tushar,
>> >
>> > On Fri, Jul 5, 2013 at 1:40 AM, Tushar Behera <tushar.behera@linaro.org
>> >wrote:
>> >
>> >> When CONFIG_TRACE is not defined, definition of trace_early_init is not
>> >> compiled and we get following error.
>> >>
>> >> common/libcommon.o:(.data.init_sequence_f+0xc): undefined reference to
>> >> `trace_early_init'
>> >>
>> >> While at it, also define reserve_trace only if CONFIG_TRACE is defined.
>> >>
>> >> CC: Simon Glass <sjg@chromium.org>
>> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
>> >> ---
>> >>  common/board_f.c |    8 ++++++--
>> >>  1 file changed, 6 insertions(+), 2 deletions(-)
>> >>
>> >> diff --git a/common/board_f.c b/common/board_f.c
>> >> index ab4242a..a685368 100644
>> >> --- a/common/board_f.c
>> >> +++ b/common/board_f.c
>> >> @@ -501,17 +501,17 @@ static int reserve_lcd(void)
>> >>  }
>> >>  #endif /* CONFIG_LCD */
>> >>
>> >> +#ifdef CONFIG_TRACE
>> >>  static int reserve_trace(void)
>> >>  {
>> >> -#ifdef CONFIG_TRACE
>> >>         gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
>> >>         gd->trace_buff = map_sysmem(gd->relocaddr,
>> >> CONFIG_TRACE_BUFFER_SIZE);
>> >>         debug("Reserving %dk for trace data at: %08lx\n",
>> >>               CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
>> >> -#endif
>> >>
>> >>         return 0;
>> >>  }
>> >> +#endif
>> >>
>> >>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
>> >> defined(CONFIG_8xx)) \
>> >>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
>> >> @@ -833,7 +833,9 @@ static init_fnc_t init_sequence_f[] = {
>> >>  #endif
>> >>         setup_mon_len,
>> >>         setup_fdt,
>> >> +#ifdef CONFIG_TRACE
>> >>         trace_early_init,
>> >> +#endif
>> >>  #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
>> >>         /* TODO: can this go into arch_cpu_init()? */
>> >>         probecpu,
>> >> @@ -977,7 +979,9 @@ static init_fnc_t init_sequence_f[] = {
>> >>  #ifdef CONFIG_LCD
>> >>         reserve_lcd,
>> >>  #endif
>> >> +#ifdef CONFIG_TRACE
>> >>         reserve_trace,
>> >> +#endif
>> >>         /* TODO: Why the dependency on CONFIG_8xx? */
>> >>  #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) ||
>> >> defined(CONFIG_8xx)) \
>> >>                 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
>> >>
>> >
>> > Does the static inline not work for you? What toolchain are you using? I
>> > assume this is ARM?
>> >
>>
>> I was testing on EXYNOS5250 using 4.7.3 toolchain.
>>
>> My mistake: while testing this patch, I had disabled CONFIG_TRACE, but
>> CONFIG_TRACE_EARLY was still enabled, hence the error. You may ignore
>> the patch.
>>
>> IMHO, we should define the TRACE related config options only if TRACE is
>> enabled. If that is ok for you, I will submit a patch for that.
>>
>
> I'm not sure it matters. The idea is that you can build U-Boot with 'make
> FTRACE=1' and get tracing enabled, without having to modify the config
> files.
>

Actually I'm wrong. What you may what in the config header is:

#idef FTRACE
#define ...all the trace configs
#endif

Then it should work as you describe.

Regards,
Simon
diff mbox

Patch

--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -45,11 +45,13 @@ 

 /* Allow tracing to be enabled */
 #define CONFIG_TRACE
+#ifdef CONFIG_TRACE
 #define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
 #define CONFIG_TRACE_EARLY
 #define CONFIG_TRACE_EARLY_ADDR                0x50000000
+#endif


> Regards,