[2/3] mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD

Message ID 20200122142747.5690-3-ulf.hansson@linaro.org
State New
Headers show
Series
  • mmc: core: Update timeouts for __mmc_switch()
Related show

Commit Message

Ulf Hansson Jan. 22, 2020, 2:27 p.m.
The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is
used to prepare an erase/trim operation. However, it doesn't make sense to
use a timeout of 10 minutes while updating the register, which becomes the
case when the timeout_ms argument for mmc_switch() is set to zero.

Instead, let's use the generic_cmd6_time, as that seems like a reasonable
timeout to use for these cases.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

---
 drivers/mmc/core/block.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

-- 
2.17.1

Patch

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 95b41c0891d0..663d87924e5e 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1107,7 +1107,7 @@  static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
 					 card->erase_arg == MMC_TRIM_ARG ?
 					 INAND_CMD38_ARG_TRIM :
 					 INAND_CMD38_ARG_ERASE,
-					 0);
+					 card->ext_csd.generic_cmd6_time);
 		}
 		if (!err)
 			err = mmc_erase(card, from, nr, card->erase_arg);
@@ -1149,7 +1149,7 @@  static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
 				 arg == MMC_SECURE_TRIM1_ARG ?
 				 INAND_CMD38_ARG_SECTRIM1 :
 				 INAND_CMD38_ARG_SECERASE,
-				 0);
+				 card->ext_csd.generic_cmd6_time);
 		if (err)
 			goto out_retry;
 	}
@@ -1167,7 +1167,7 @@  static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 					 INAND_CMD38_ARG_EXT_CSD,
 					 INAND_CMD38_ARG_SECTRIM2,
-					 0);
+					 card->ext_csd.generic_cmd6_time);
 			if (err)
 				goto out_retry;
 		}