@@ -1326,8 +1326,8 @@
#
# @size: new image size in bytes
#
-# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 0.14.0
#
@@ -1510,8 +1510,8 @@
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
#
-# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 0.14.0
#
@@ -1586,9 +1586,8 @@
# when specifying the string or the image chain may
# not be able to be reopened again.
#
-# Returns: Nothing on success
-#
-# If "device" does not exist or cannot be determined, DeviceNotFound
+# Returns: - Nothing on success
+# - If "device" does not exist or cannot be determined, DeviceNotFound
#
# Since: 2.1
##
@@ -1674,9 +1673,9 @@
# list without user intervention.
# Defaults to true. (Since 3.1)
#
-# Returns: Nothing on success
-# If @device does not exist, DeviceNotFound
-# Any other error returns a GenericError.
+# Returns: - Nothing on success
+# - If @device does not exist, DeviceNotFound
+# - Any other error returns a GenericError.
#
# Since: 1.3
#
@@ -1704,8 +1703,8 @@
# The operation can be stopped before it has completed using the
# block-job-cancel command.
#
-# Returns: nothing on success
-# If @device is not a valid block device, GenericError
+# Returns: - nothing on success
+# - If @device is not a valid block device, GenericError
#
# Since: 1.6
#
@@ -1730,8 +1729,8 @@
# The operation can be stopped before it has completed using the
# block-job-cancel command.
#
-# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 2.3
#
@@ -1925,8 +1924,8 @@
# format of the mirror image, default is to probe if mode='existing',
# else the format of the source.
#
-# Returns: nothing on success
-# If @device is not a valid block device, GenericError
+# Returns: - nothing on success
+# - If @device is not a valid block device, GenericError
#
# Since: 1.3
#
@@ -2097,9 +2096,9 @@
#
# Create a dirty bitmap with a name on the node, and start tracking the writes.
#
-# Returns: nothing on success
-# If @node is not a valid block device or node, DeviceNotFound
-# If @name is already taken, GenericError with an explanation
+# Returns: - nothing on success
+# - If @node is not a valid block device or node, DeviceNotFound
+# - If @name is already taken, GenericError with an explanation
#
# Since: 2.4
#
@@ -2120,10 +2119,10 @@
# with block-dirty-bitmap-add. If the bitmap is persistent, remove it from its
# storage too.
#
-# Returns: nothing on success
-# If @node is not a valid block device or node, DeviceNotFound
-# If @name is not found, GenericError with an explanation
-# if @name is frozen by an operation, GenericError
+# Returns: - nothing on success
+# - If @node is not a valid block device or node, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
+# - if @name is frozen by an operation, GenericError
#
# Since: 2.4
#
@@ -2144,9 +2143,9 @@
# backup from this point in time forward will only backup clusters
# modified after this clear operation.
#
-# Returns: nothing on success
-# If @node is not a valid block device, DeviceNotFound
-# If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 2.4
#
@@ -2165,9 +2164,9 @@
#
# Enables a dirty bitmap so that it will begin tracking disk changes.
#
-# Returns: nothing on success
-# If @node is not a valid block device, DeviceNotFound
-# If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 4.0
#
@@ -2186,9 +2185,9 @@
#
# Disables a dirty bitmap so that it will stop tracking disk changes.
#
-# Returns: nothing on success
-# If @node is not a valid block device, DeviceNotFound
-# If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 4.0
#
@@ -2215,11 +2214,11 @@
# of the source bitmaps. This can be used to achieve backup checkpoints, or in
# simpler usages, to copy bitmaps.
#
-# Returns: nothing on success
-# If @node is not a valid block device, DeviceNotFound
-# If any bitmap in @bitmaps or @target is not found, GenericError
-# If any of the bitmaps have different sizes or granularities,
-# GenericError
+# Returns: - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If any bitmap in @bitmaps or @target is not found, GenericError
+# - If any of the bitmaps have different sizes or granularities,
+# GenericError
#
# Since: 4.0
#
@@ -2251,10 +2250,10 @@
#
# Get bitmap SHA256.
#
-# Returns: BlockDirtyBitmapSha256 on success
-# If @node is not a valid block device, DeviceNotFound
-# If @name is not found or if hashing has failed, GenericError with an
-# explanation
+# Returns: - BlockDirtyBitmapSha256 on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found or if hashing has failed, GenericError with an
+# explanation
#
# Since: 2.10
##
@@ -2371,8 +2370,8 @@
# the device will be removed from its group and the rest of its
# members will not be affected. The 'group' parameter is ignored.
#
-# Returns: Nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# Returns: - Nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 1.1
#
@@ -2622,7 +2621,8 @@
# list without user intervention.
# Defaults to true. (Since 3.1)
#
-# Returns: Nothing on success. If @device does not exist, DeviceNotFound.
+# Returns: - Nothing on success.
+# - If @device does not exist, DeviceNotFound.
#
# Since: 1.1
#
@@ -2656,8 +2656,8 @@
# @speed: the maximum speed, in bytes per second, or 0 for unlimited.
# Defaults to 0.
#
-# Returns: Nothing on success
-# If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+# - If no background operation is active on this device, DeviceNotActive
#
# Since: 1.1
##
@@ -2696,8 +2696,8 @@
# abandon the job immediately (even if it is paused) instead of waiting
# for the destination to complete its final synchronization (since 1.3)
#
-# Returns: Nothing on success
-# If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+# - If no background operation is active on this device, DeviceNotActive
#
# Since: 1.1
##
@@ -2720,8 +2720,8 @@
# the name of the parameter), but since QEMU 2.7 it can have
# other values.
#
-# Returns: Nothing on success
-# If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+# - If no background operation is active on this device, DeviceNotActive
#
# Since: 1.3
##
@@ -2742,8 +2742,8 @@
# the name of the parameter), but since QEMU 2.7 it can have
# other values.
#
-# Returns: Nothing on success
-# If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+# - If no background operation is active on this device, DeviceNotActive
#
# Since: 1.3
##
@@ -2770,8 +2770,8 @@
# the name of the parameter), but since QEMU 2.7 it can have
# other values.
#
-# Returns: Nothing on success
-# If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+# - If no background operation is active on this device, DeviceNotActive
#
# Since: 1.3
##
@@ -115,15 +115,12 @@
#
# For the arguments, see the documentation of BlockdevSnapshotInternal.
#
-# Returns: nothing on success
-#
-# If @device is not a valid block device, GenericError
-#
-# If any snapshot matching @name exists, or @name is empty,
-# GenericError
-#
-# If the format of the image used does not support it,
-# BlockFormatFeatureNotSupported
+# Returns: - nothing on success
+# - If @device is not a valid block device, GenericError
+# - If any snapshot matching @name exists, or @name is empty,
+# GenericError
+# - If the format of the image used does not support it,
+# BlockFormatFeatureNotSupported
#
# Since: 1.7
#
@@ -154,12 +151,12 @@
#
# @name: optional the snapshot's name to be deleted
#
-# Returns: SnapshotInfo on success
-# If @device is not a valid block device, GenericError
-# If snapshot not found, GenericError
-# If the format of the image used does not support it,
-# BlockFormatFeatureNotSupported
-# If @id and @name are both not specified, GenericError
+# Returns: - SnapshotInfo on success
+# - If @device is not a valid block device, GenericError
+# - If snapshot not found, GenericError
+# - If the format of the image used does not support it,
+# BlockFormatFeatureNotSupported
+# - If @id and @name are both not specified, GenericError
#
# Since: 1.7
#
@@ -197,10 +194,8 @@
# @force: If true, eject regardless of whether the drive is locked.
# If not specified, the default value is false.
#
-# Returns: Nothing on success
-#
-# If @device is not a valid block device, DeviceNotFound
-#
+# Returns: - Nothing on success
+# - If @device is not a valid block device, DeviceNotFound
# Notes: Ejecting a device with no media results in success
#
# Since: 0.14.0
@@ -430,12 +430,10 @@
#
# Return information about the balloon device.
#
-# Returns: @BalloonInfo on success
-#
-# If the balloon driver is enabled but not functional because the KVM
-# kernel module cannot support it, KvmMissingCap
-#
-# If no balloon device is present, DeviceNotActive
+# Returns: - @BalloonInfo on success
+# - If the balloon driver is enabled but not functional because the KVM
+# kernel module cannot support it, KvmMissingCap
+# - If no balloon device is present, DeviceNotActive
#
# Since: 0.14.0
#
@@ -492,8 +490,8 @@
#
# @bar: the index of the Base Address Register for this region
#
-# @type: 'io' if the region is a PIO region
-# 'memory' if the region is a MMIO region
+# @type: - 'io' if the region is a PIO region
+# - 'memory' if the region is a MMIO region
#
# @size: memory size
#
@@ -1004,10 +1002,10 @@
#
# @value: the target size of the balloon in bytes
#
-# Returns: Nothing on success
-# If the balloon driver is enabled but not functional because the KVM
+# Returns: - Nothing on success
+# - If the balloon driver is enabled but not functional because the KVM
# kernel module cannot support it, KvmMissingCap
-# If no balloon device is present, DeviceNotActive
+# - If no balloon device is present, DeviceNotActive
#
# Notes: This command just issues a request to the guest. When it returns,
# the balloon size may not have changed. A guest can change the balloon
@@ -1086,8 +1084,8 @@
# If @device is 'vnc' and @target is 'password', this is the new VNC
# password to set. See change-vnc-password for additional notes.
#
-# Returns: Nothing on success.
-# If @device is not a valid block device, DeviceNotFound
+# Returns: - Nothing on success.
+# - If @device is not a valid block device, DeviceNotFound
#
# Notes: This interface is deprecated, and it is strongly recommended that you
# avoid using it. For changing block devices, use
@@ -1237,11 +1235,9 @@
#
# @opaque: A free-form string that can be used to describe the fd.
#
-# Returns: @AddfdInfo on success
-#
-# If file descriptor was not received, FdNotSupplied
-#
-# If @fdset-id is a negative value, InvalidParameterValue
+# Returns: - @AddfdInfo on success
+# - If file descriptor was not received, FdNotSupplied
+# - If @fdset-id is a negative value, InvalidParameterValue
#
# Notes: The list of fd sets is shared by all monitor connections.
#
@@ -1269,8 +1265,8 @@
#
# @fd: The file descriptor that is to be removed.
#
-# Returns: Nothing on success
-# If @fdset-id or @fd is not found, FdNotFound
+# Returns: - Nothing on success
+# - If @fdset-id or @fd is not found, FdNotFound
#
# Since: 1.2.0
#
@@ -96,8 +96,8 @@
#
# A union referencing different TPM backend types' configuration options
#
-# @type: 'passthrough' The configuration options for the TPM passthrough type
-# 'emulator' The configuration options for TPM emulator backend type
+# @type: - 'passthrough' The configuration options for the TPM passthrough type
+# - 'emulator' The configuration options for TPM emulator backend type
#
# Since: 1.5
##
@@ -12,8 +12,8 @@
#
# Sets the password of a remote display session.
#
-# @protocol: 'vnc' to modify the VNC server password
-# 'spice' to modify the Spice server password
+# @protocol: - 'vnc' to modify the VNC server password
+# - 'spice' to modify the Spice server password
#
# @password: the new password
#
@@ -23,8 +23,8 @@
# 'disconnect' to disconnect existing clients
# 'keep' to maintain existing clients
#
-# Returns: Nothing on success
-# If Spice is not enabled, DeviceNotFound
+# Returns: - Nothing on success
+# - If Spice is not enabled, DeviceNotFound
#
# Since: 0.14.0
#
@@ -46,13 +46,14 @@
# @protocol: the name of the remote display protocol 'vnc' or 'spice'
#
# @time: when to expire the password.
-# 'now' to expire the password immediately
-# 'never' to cancel password expiration
-# '+INT' where INT is the number of seconds from now (integer)
-# 'INT' where INT is the absolute time in seconds
#
-# Returns: Nothing on success
-# If @protocol is 'spice' and Spice is not active, DeviceNotFound
+# - 'now' to expire the password immediately
+# - 'never' to cancel password expiration
+# - '+INT' where INT is the number of seconds from now (integer)
+# - 'INT' where INT is the absolute time in seconds
+#
+# Returns: - Nothing on success
+# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
#
# Since: 0.14.0
#
@@ -201,9 +202,10 @@
# @tls-port: The SPICE server's TLS port number.
#
# @auth: the current authentication type used by the server
-# 'none' if no authentication is being used
-# 'spice' uses SASL or direct TLS authentication, depending on command
-# line options
+#
+# - 'none' if no authentication is being used
+# - 'spice' uses SASL or direct TLS authentication, depending on command
+# line options
#
# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
# be determined by the client or the server, or unknown if spice
@@ -433,27 +435,28 @@
# @host: The hostname the VNC server is bound to. This depends on
# the name resolution on the host and may be an IP address.
#
-# @family: 'ipv6' if the host is listening for IPv6 connections
-# 'ipv4' if the host is listening for IPv4 connections
-# 'unix' if the host is listening on a unix domain socket
-# 'unknown' otherwise
+# @family: - 'ipv6' if the host is listening for IPv6 connections
+# - 'ipv4' if the host is listening for IPv4 connections
+# - 'unix' if the host is listening on a unix domain socket
+# - 'unknown' otherwise
#
# @service: The service name of the server's port. This may depends
# on the host system's service database so symbolic names should not
# be relied on.
#
# @auth: the current authentication type used by the server
-# 'none' if no authentication is being used
-# 'vnc' if VNC authentication is being used
-# 'vencrypt+plain' if VEncrypt is used with plain text authentication
-# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
-# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
-# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
-# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
-# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
-# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
-# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
-# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
+#
+# - 'none' if no authentication is being used
+# - 'vnc' if VNC authentication is being used
+# - 'vencrypt+plain' if VEncrypt is used with plain text authentication
+# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
+# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
+# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
+# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
+# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
+# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
+# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
+# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
#
# @clients: a list of @VncClientInfo of all currently connected clients
#
@@ -840,8 +843,8 @@
# @hold-time: time to delay key up events, milliseconds. Defaults
# to 100
#
-# Returns: Nothing on success
-# If key is unknown or redundant, InvalidParameter
+# Returns: - Nothing on success
+# - If key is unknown or redundant, InvalidParameter
#
# Since: 1.3.0
#