[2/7] mtd: rawnand: marvell: Release DMA channel on error

Message ID 20200227123749.24064-3-peter.ujfalusi@ti.com
State New
Headers show
Series
  • mtd: rawnand: Convert drivers to use dma_request_chan()
Related show

Commit Message

Peter Ujfalusi Feb. 27, 2020, 12:37 p.m.
Release the DMA channel on errors after the channel has been successfully
requested.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

---
 drivers/mtd/nand/raw/marvell_nand.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Comments

Miquel Raynal March 10, 2020, 6:30 p.m. | #1
On Thu, 2020-02-27 at 12:37:44 UTC, Peter Ujfalusi wrote:
> Release the DMA channel on errors after the channel has been successfully

> requested.

> 

> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>


Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Patch

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index fb5abdcfb007..b6c7e1903396 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2751,8 +2751,10 @@  static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r)
-		return -ENXIO;
+	if (!r) {
+		ret = -ENXIO;
+		goto release_channel;
+	}
 
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -2763,7 +2765,7 @@  static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	ret = dmaengine_slave_config(nfc->dma_chan, &config);
 	if (ret < 0) {
 		dev_err(nfc->dev, "Failed to configure DMA channel\n");
-		return ret;
+		goto release_channel;
 	}
 
 	/*
@@ -2773,12 +2775,20 @@  static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	 * the provided buffer.
 	 */
 	nfc->dma_buf = kmalloc(MAX_CHUNK_SIZE, GFP_KERNEL | GFP_DMA);
-	if (!nfc->dma_buf)
-		return -ENOMEM;
+	if (!nfc->dma_buf) {
+		ret = -ENOMEM;
+		goto release_channel;
+	}
 
 	nfc->use_dma = true;
 
 	return 0;
+
+release_channel:
+	dma_release_channel(nfc->dma_chan);
+	nfc->dma_chan = NULL;
+
+	return ret;
 }
 
 static void marvell_nfc_reset(struct marvell_nfc *nfc)
@@ -2920,10 +2930,13 @@  static int marvell_nfc_probe(struct platform_device *pdev)
 
 	ret = marvell_nand_chips_init(dev, nfc);
 	if (ret)
-		goto unprepare_reg_clk;
+		goto release_dma;
 
 	return 0;
 
+release_dma:
+	if (nfc->use_dma)
+		dma_release_channel(nfc->dma_chan);
 unprepare_reg_clk:
 	clk_disable_unprepare(nfc->reg_clk);
 unprepare_core_clk: