diff mbox series

[3/4] mmc: sdio: Re-use negotiated OCR mask when re-sending CMD8

Message ID 20200430091640.455-4-ulf.hansson@linaro.org
State New
Headers show
Series mmc: sdio: Fix various issues in mmc_sdio_init_card() | expand

Commit Message

Ulf Hansson April 30, 2020, 9:16 a.m. UTC 
While initializing an SDIO card in mmc_sdio_init_card(), we may need to
retry the UHS-I specific initialization, in case the first attempt fails.

This leads to resending a CMD8, but also to restart from scratch with the
so called OCR mask negotiations. This is unnecessary as we already have a
negotiated OCR mask, so let's use that instead. In this way, the behaviour
also becomes more consistent with other similar paths.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

---
 drivers/mmc/core/sdio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 20eed28ea60d..853ac65f0485 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -543,12 +543,12 @@  static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	return err;
 }
 
-static void mmc_sdio_resend_if_cond(struct mmc_host *host,
+static void mmc_sdio_resend_if_cond(struct mmc_host *host, u32 ocr,
 				    struct mmc_card *card)
 {
 	sdio_reset(host);
 	mmc_go_idle(host);
-	mmc_send_if_cond(host, host->ocr_avail);
+	mmc_send_if_cond(host, ocr);
 	mmc_remove_card(card);
 }
 
@@ -640,7 +640,7 @@  static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	if (rocr & ocr & R4_18V_PRESENT) {
 		err = mmc_set_uhs_voltage(host, ocr_card);
 		if (err == -EAGAIN) {
-			mmc_sdio_resend_if_cond(host, card);
+			mmc_sdio_resend_if_cond(host, ocr_card, card);
 			retries--;
 			goto try_again;
 		} else if (err) {
@@ -712,7 +712,7 @@  static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	err = sdio_read_cccr(card, ocr);
 	if (err) {
-		mmc_sdio_resend_if_cond(host, card);
+		mmc_sdio_resend_if_cond(host, ocr_card, card);
 		if (ocr & R4_18V_PRESENT) {
 			/* Retry init sequence, but without R4_18V_PRESENT. */
 			retries = 0;