diff mbox series

[1/2] dt-bindings: phy-qcom-usb-hs-phy: Add qcom,enable-vbus-pullup

Message ID 20200521005031.747162-2-bryan.odonoghue@linaro.org
State New
Headers show
Series phy: qcom-usb-hs: Add DT controlled VBUS pullup waggle | expand

Commit Message

Bryan O'Donoghue May 21, 2020, 12:50 a.m. UTC
This patch adds a dt-binding for qcom,enable-vbus-pullup. The binding
qcom,enable-vbus-pullup tells the HS USB PHY driver whether it should set
and unset the internal VBUS pullup bits when starting/stopping the USB PHY.

Setting the pullup bits is something you want to do if you have not routed
VBUS to a GPIO on the SoC and thus cannot use extcon with the current
switching logic in the PHY.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Rob Herring May 28, 2020, 10:34 p.m. UTC | #1
On Thu, 21 May 2020 01:50:30 +0100, Bryan O'Donoghue wrote:
> This patch adds a dt-binding for qcom,enable-vbus-pullup. The binding
> qcom,enable-vbus-pullup tells the HS USB PHY driver whether it should set
> and unset the internal VBUS pullup bits when starting/stopping the USB PHY.
> 
> Setting the pullup bits is something you want to do if you have not routed
> VBUS to a GPIO on the SoC and thus cannot use extcon with the current
> switching logic in the PHY.
> 
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
index b3b75c1e6285..77e9bf1f8ba2 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
@@ -64,6 +64,12 @@  PROPERTIES
                 from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
                 <0x1 0x53> would mean "write the value 0x53 to address 0x81".
 
+- qcom,enable-vbus-pullup:
+   Usage: optional
+   Value type: <bool>
+   Definition: Flag to indicate if the USB PHY driver should toggle internal
+               VBUS line pullup bits when powering the PHY on or off.
+
 EXAMPLE
 
 otg: usb-controller {