diff mbox series

[v6,3/3] clk: qcom: Add modem clock controller driver for SC7180

Message ID 1584211147-5570-4-git-send-email-tdas@codeaurora.org
State Superseded
Headers show
Series [v6,1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings | expand

Commit Message

Taniya Das March 14, 2020, 6:39 p.m. UTC
Add support for the modem clock controller found on SC7180
based devices. This would allow modem drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig      |   9 +++
 drivers/clk/qcom/Makefile     |   1 +
 drivers/clk/qcom/mss-sc7180.c | 143 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+)
 create mode 100644 drivers/clk/qcom/mss-sc7180.c

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 15cdcdc..4225f86 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -280,6 +280,15 @@  config SC_GPUCC_7180
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.

+config SC_MSS_7180
+	tristate "SC7180 Modem Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the Modem Subsystem clock controller on Qualcomm
+	  Technologies, Inc on SC7180 devices.
+	  Say Y if you want to use the Modem branch clocks of the Modem
+	  subsystem clock controller to reset the MSS subsystem.
+
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 656a87e..9135592 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -50,6 +50,7 @@  obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
new file mode 100644
index 0000000..673fa1a
--- /dev/null
+++ b/drivers/clk/qcom/mss-sc7180.c
@@ -0,0 +1,143 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,mss-sc7180.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch mss_axi_nav_clk = {
+	.halt_reg = 0x20bc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20bc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_nav_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_nav_axi",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch mss_axi_crypto_clk = {
+	.halt_reg = 0x20cc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_crypto_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_mfab_axis",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config mss_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+	.max_register	= 0x41aa0cc,
+};
+
+static struct clk_regmap *mss_sc7180_clocks[] = {
+	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
+	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
+};
+
+static const struct qcom_cc_desc mss_sc7180_desc = {
+	.config = &mss_regmap_config,
+	.clks = mss_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
+};
+
+static int mss_sc7180_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, "cfg_ahb");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	ret = qcom_cc_probe(pdev, &mss_sc7180_desc);
+	if (ret < 0)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int mss_sc7180_remove(struct platform_device *pdev)
+{
+	pm_clk_destroy(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mss_sc7180_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id mss_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-mss" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
+
+static struct platform_driver mss_sc7180_driver = {
+	.probe		= mss_sc7180_probe,
+	.remove		= mss_sc7180_remove,
+	.driver		= {
+		.name		= "sc7180-mss",
+		.of_match_table = mss_sc7180_match_table,
+		.pm = &mss_sc7180_pm_ops,
+	},
+};
+
+static int __init mss_sc7180_init(void)
+{
+	return platform_driver_register(&mss_sc7180_driver);
+}
+subsys_initcall(mss_sc7180_init);
+
+static void __exit mss_sc7180_exit(void)
+{
+	platform_driver_unregister(&mss_sc7180_driver);
+}
+module_exit(mss_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
+MODULE_LICENSE("GPL v2");