| Message ID | 20200621153812.30531-1-simhavcs@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4] display/drm/bridge: TC358775 DSI/LVDS driver | expand |
Hi, On 21/06/2020 17:38, Vinay Simha BN wrote: > Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> > > --- > v1: > Initial version > > v2: > * Andrzej Hajda review comments incorporated > SPDX identifier > development debug removed > alphabetic order headers > u32 instead of unit32_t > magic numbers to macros for CLRSI and mux registers > ignored return value > > * Laurent Pinchart review comments incorporated > mdelay to usleep_range > bus_formats added > > v3: > * Andrzej Hajda review comments incorporated > drm_connector_status removed > u32 rev removed and local variabl is used > regulator enable disable with proper orders and delays > as per the spec > devm_drm_panel_bridge_add method used instead of panel > description modified > dual port implemented > > v4: > * Sam Ravnborg review comments incorporated > panel->connector_type removed > > * Reported-by: kernel test robot <lkp@intel.com> > parse_dt to static function > removed the if (endpoint), since data-lanes has to be > present for dsi dts ports I maybe missed something, but you should also post a YAML DT bindings file associated to the driver. Neil > --- > drivers/gpu/drm/bridge/Kconfig | 10 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/tc358775.c | 721 ++++++++++++++++++++++++++++++ > 3 files changed, 732 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/tc358775.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 43271c21d3fc..084e9853944a 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -181,6 +181,16 @@ config DRM_TOSHIBA_TC358768 > help > Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. > > +config DRM_TOSHIBA_TC358775 > + tristate "Toshiba TC358775 LVDS bridge" > + depends on OF > + select DRM_KMS_HELPER > + select REGMAP_I2C > + select DRM_PANEL > + select DRM_MIPI_DSI > + ---help--- > + Toshiba TC358775 LVDS bridge chip driver. > + > config DRM_TI_TFP410 > tristate "TI TFP410 DVI/HDMI bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index d63d4b7e4347..23c770b3bfe4 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -15,6 +15,7 @@ obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o > obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o > obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o > obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o > +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o > obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ > obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o > obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o > diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c > new file mode 100644 > index 000000000000..8c9bd4e77bfd > --- /dev/null > +++ b/drivers/gpu/drm/bridge/tc358775.c > @@ -0,0 +1,721 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * tc358775 DSI to LVDS bridge driver > + * > + * Copyright (C) 2020 SMART Wireless Computing > + * Author: Vinay Simha BN <simhavcs@gmail.com> > + * > + */ > +//#define DEBUG > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_dp_helper.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_of.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_probe_helper.h> > + > +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) > +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) > + > +/* Registers */ > + > +/* DSI D-PHY Layer Registers */ > +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ > +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ > +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ > +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ > +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ > +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ > +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ > +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ > +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ > +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ > +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ > +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ > +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ > + > +/* DSI PPI Layer Registers */ > +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ > +#define PPI_START_FUNCTION 1 > + > +#define PPI_BUSYPPI 0x0108 > +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ > +#define PPI_LPTXTIMECNT 0x0114 > +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ > +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ > + > +/* Analog timer function enable */ > +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ > +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ > +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ > +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ > +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ > + > +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ > +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ > +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ > +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ > + > +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ > +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ > +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ > +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ > +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ > +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ > +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ > +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ > +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ > +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ > +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ > +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ > +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ > +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ > +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ > + > +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ > +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ > +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ > +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ > +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ > +#define DSI_RX_START 1 > + > +#define DSI_BUSYDSI 0x0208 > +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ > +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ > +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ > + > +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ > +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ > +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ > +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ > + > +#define DSIERRCNT 0x0300 /* DSI Error Count */ > +#define APLCTRL 0x0400 /* Application Layer Control */ > +#define RDPKTLN 0x0404 /* Command Read Packet Length */ > + > +#define VPCTRL 0x0450 /* Video Path Control */ > +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ > +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ > +#define VTIM1 0x045C /* Vertical Timing Control 1 */ > +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ > +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ > +#define VFUEN_EN BIT(0) /* Upload Enable */ > + > +/* Mux Input Select for LVDS LINK Input */ > +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ > +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ > +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ > +#define LV_MX1215 0x048C /* Bit 12 to 15 */ > +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ > +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ > +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ > +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ > + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) > + > +/* Input bit numbers used in mux registers */ > +enum { > + LVI_R0, > + LVI_R1, > + LVI_R2, > + LVI_R3, > + LVI_R4, > + LVI_R5, > + LVI_R6, > + LVI_R7, > + LVI_G0, > + LVI_G1, > + LVI_G2, > + LVI_G3, > + LVI_G4, > + LVI_G5, > + LVI_G6, > + LVI_G7, > + LVI_B0, > + LVI_B1, > + LVI_B2, > + LVI_B3, > + LVI_B4, > + LVI_B5, > + LVI_B6, > + LVI_B7, > + LVI_HS, > + LVI_VS, > + LVI_DE, > + LVI_L0 > +}; > + > +#define LVCFG 0x049C /* LVDS Configuration */ > +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ > +#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ > +#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) > +#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */ > +#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */ > + > +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ > +#define SYSSTAT 0x0500 /* System Status */ > +#define SYSRST 0x0504 /* System Reset */ > + > +#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ > +#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ > +#define SYS_RST_LCD BIT(2) /* Reset LCD controller */ > +#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ > +#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ > +#define SYS_RST_REG BIT(5) /* Reset Register module */ > + > +/* GPIO Registers */ > +#define GPIOC 0x0520 /* GPIO Control */ > +#define GPIOO 0x0524 /* GPIO Output */ > +#define GPIOI 0x0528 /* GPIO Input */ > + > +/* I2C Registers */ > +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ > +#define I2CMADDR 0x0544 /* I2C Master Addressing */ > +#define WDATAQ 0x0548 /* Write Data Queue */ > +#define RDATAQ 0x054C /* Read Data Queue */ > + > +/* Chip ID and Revision ID Register */ > +#define IDREG 0x0580 > + > +#define LPX_PERIOD 4 > +#define TTA_GET 0x40000 > +#define TTA_SURE 6 > + > +#define TC358775XBG_ID 0x00007500 > + > +/* Debug Registers */ > +#define DEBUG00 0x05A0 /* Debug */ > +#define DEBUG01 0x05A4 /* LVDS Data */ > + > +#define DSI_CLEN_BIT BIT(0) > +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ > +#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */ > +#define LVCFG_LVEN_BIT BIT(0) > + > +#define L0EN BIT(1) > + > +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 > +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 > +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & > + TC358775_VPCTRL_VSDELAY__MASK; > +} > + > +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 > +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 > +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & > + TC358775_VPCTRL_OPXLFMT__MASK; > +} > + > +#define TC358775_VPCTRL_MSF__MASK 0x00000001 > +#define TC358775_VPCTRL_MSF__SHIFT 0 > +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & > + TC358775_VPCTRL_MSF__MASK; > +} > + > +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 > +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 > +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) > +{ > + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & > + TC358775_LVCFG_PCLKDIV__MASK; > +} > + > +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 > +#define TC358775_LVCFG_LVDLINK__SHIFT 0 > +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) > +{ > + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & > + TC358775_LVCFG_LVDLINK__MASK; > +} > + > +enum tc358775_ports { > + TC358775_DSI_IN, > + TC358775_LVDS_OUT0, > + TC358775_LVDS_OUT1, > +}; > + > +struct tc_data { > + struct i2c_client *i2c; > + struct device *dev; > + > + struct drm_bridge bridge; > + struct drm_bridge *panel_bridge; > + > + struct device_node *host_node; > + struct mipi_dsi_device *dsi; > + u8 num_dsi_lanes; > + > + struct regulator *vdd; > + struct regulator *vddio; > + struct gpio_desc *reset_gpio; > + struct gpio_desc *stby_gpio; > + bool dual_link; /* single-link or dual-link */ > +}; > + > +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) > +{ > + return container_of(b, struct tc_data, bridge); > +} > + > +static void tc_bridge_pre_enable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct device *dev = &tc->dsi->dev; > + int ret; > + > + ret = regulator_enable(tc->vddio); > + if (ret < 0) > + dev_err(dev, "regulator vddio enable failed, %d\n", ret); > + usleep_range(10000, 11000); > + > + ret = regulator_enable(tc->vdd); > + if (ret < 0) > + dev_err(dev, "regulator vdd enable failed, %d\n", ret); > + usleep_range(10000, 11000); > + > + gpiod_set_value(tc->stby_gpio, 0); > + usleep_range(10000, 11000); > + > + gpiod_set_value(tc->reset_gpio, 0); > + usleep_range(10, 20); > +} > + > +static void tc_bridge_post_disable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct device *dev = &tc->dsi->dev; > + int ret; > + > + ret = regulator_disable(tc->vddio); > + if (ret < 0) > + dev_err(dev, "regulator vddio disable failed, %d\n", ret); > + usleep_range(10000, 11000); > + > + ret = regulator_disable(tc->vdd); > + if (ret < 0) > + dev_err(dev, "regulator vdd disable failed, %d\n", ret); > + usleep_range(10000, 11000); > + > + gpiod_set_value(tc->stby_gpio, 1); > + usleep_range(10000, 11000); > + > + gpiod_set_value(tc->reset_gpio, 1); > + usleep_range(10, 20); > +} > + > +static u32 d2l_read(struct i2c_client *i2c, u16 reg) > +{ > + int ret; > + u8 val[4]; > + u8 addr[] = {(reg >> 8) & 0xff, reg & 0xff}; > + u32 value; > + > + ret = i2c_master_send(i2c, addr, sizeof(reg)); > + if (ret < 0) > + goto fail; > + > + ret = i2c_master_recv(i2c, val, sizeof(value)); > + if (ret < 0) > + goto fail; > + > + value = val[3] << 24 | val[2] << 16 | val[1] << 8 | val[0]; > + > + pr_debug("d2l: I2C : reg:%04x value:%08x\n", reg, value); > + > + return value; > + > +fail: > + dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n", > + ret, reg); > + return 0; > +} > + > +static void d2l_write(struct i2c_client *i2c, u16 reg, u32 val) > +{ > + u8 buf[6]; > + int ret; > + > + buf[0] = reg >> 8; > + buf[1] = reg & 0xFF; > + buf[2] = (val >> 0) & 0xFF; > + buf[3] = (val >> 8) & 0xFF; > + buf[4] = (val >> 16) & 0xFF; > + buf[5] = (val >> 24) & 0xFF; > + > + ret = i2c_master_send(i2c, buf, ARRAY_SIZE(buf)); > + if (ret < 0) > + dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n", > + ret, reg); > +} > + > +/* helper function to access bus_formats */ > +static struct drm_connector *get_connector(struct drm_encoder *encoder) > +{ > + struct drm_device *dev = encoder->dev; > + struct drm_connector *connector; > + > + list_for_each_entry(connector, &dev->mode_config.connector_list, head) > + if (connector->encoder == encoder) > + return connector; > + > + return NULL; > +} > + > +static void tc_bridge_enable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; > + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; > + u32 val = 0; > + u16 bus_formats; > + struct drm_display_mode *mode; > + struct drm_connector *connector = get_connector(bridge->encoder); > + > + mode = &bridge->encoder->crtc->state->adjusted_mode; > + > + hbpr = mode->htotal - mode->hsync_end; > + hpw = mode->hsync_end - mode->hsync_start; > + vbpr = mode->vtotal - mode->vsync_end; > + vpw = mode->vsync_end - mode->vsync_start; > + > + htime1 = (hbpr << 16) + hpw; > + vtime1 = (vbpr << 16) + vpw; > + > + hfpr = mode->hsync_start - mode->hdisplay; > + hsize = mode->hdisplay; > + vfpr = mode->vsync_start - mode->vdisplay; > + vsize = mode->vdisplay; > + > + htime2 = (hfpr << 16) + hsize; > + vtime2 = (vfpr << 16) + vsize; > + > + val = d2l_read(tc->i2c, IDREG); > + > + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n", > + (val >> 8) & 0xFF, val & 0xFF); > + > + d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM | > + SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS); > + usleep_range(30000, 40000); > + > + d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE); > + d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD); > + d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3); > + d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3); > + d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3); > + d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3); > + > + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; > + d2l_write(tc->i2c, PPI_LANEENABLE, val); > + d2l_write(tc->i2c, DSI_LANEENABLE, val); > + > + d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); > + d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); > + > + val = TC358775_VPCTRL_VSDELAY(21); > + > + bus_formats = connector->display_info.bus_formats[0]; > + dev_dbg(tc->dev, "bus_formats : %04x\n", bus_formats); > + > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG || > + bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { > + /* RGB888 */ > + val |= TC358775_VPCTRL_OPXLFMT(1); > + d2l_write(tc->i2c, VPCTRL, val); > + } else { > + /* RGB666 */ > + val |= TC358775_VPCTRL_MSF(1); > + d2l_write(tc->i2c, VPCTRL, val); > + } > + > + d2l_write(tc->i2c, HTIM1, htime1); > + d2l_write(tc->i2c, VTIM1, vtime1); > + d2l_write(tc->i2c, HTIM2, htime2); > + d2l_write(tc->i2c, VTIM2, vtime2); > + > + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > + d2l_write(tc->i2c, SYSRST, SYS_RST_LCD); > + d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6)); > + > + /* default jeida-24 */ > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { > + /* vesa-24 */ > + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); > + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); > + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); > + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); > + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); > + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); > + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); > + } > + > + if (bus_formats == MEDIA_BUS_FMT_RGB666_1X7X3_SPWG) { > + /* jeida-18 */ > + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); > + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0)); > + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0)); > + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); > + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2)); > + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); > + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0)); > + } > + > + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > + > + val = LVCFG_LVEN_BIT; > + if (tc->dual_link) { > + val |= TC358775_LVCFG_LVDLINK(1); > + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6); > + } else { > + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3); > + } > + > + d2l_write(tc->i2c, LVCFG, val); > +} > + > +static int tc_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_mode *mode) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + > + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ > + if ((mode->clock > 135000 && tc->dual_link) || > + (mode->clock > 270000 && tc->dual_link)) > + return MODE_CLOCK_HIGH; > + > + return MODE_OK; > +} > + > +static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) > +{ > + struct device_node *endpoint; > + struct device_node *parent; > + struct device_node *remote; > + struct property *prop; > + int len; > + > + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > + TC358775_DSI_IN, -1); > + if (endpoint) { > + /* dsi0_out node */ > + parent = of_graph_get_remote_port_parent(endpoint); > + of_node_put(endpoint); > + if (parent) { > + /* dsi0 port 1 */ > + endpoint = of_graph_get_endpoint_by_regs(parent, 1, -1); > + of_node_put(parent); > + prop = of_find_property(endpoint, "data-lanes", > + &len); > + of_node_put(endpoint); > + if (!prop) { > + dev_err(tc->dev, > + "failed to find data lane\n"); > + return -EPROBE_DEFER; > + } > + } > + } > + > + tc->num_dsi_lanes = len / sizeof(u32); > + > + if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4) > + return -EINVAL; > + > + tc->host_node = of_graph_get_remote_node(np, 0, 0); > + if (!tc->host_node) > + return -ENODEV; > + > + of_node_put(tc->host_node); > + > + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > + TC358775_LVDS_OUT1, -1); > + if (endpoint) { > + remote = of_graph_get_remote_port_parent(endpoint); > + of_node_put(endpoint); > + > + if (remote) { > + if (of_device_is_available(remote)) > + tc->dual_link = true; > + of_node_put(remote); > + } > + } > + > + dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes); > + dev_dbg(tc->dev, "operating in %s-link mode\n", > + tc->dual_link ? "dual" : "single"); > + > + return 0; > +} > + > +static int tc_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct device *dev = &tc->i2c->dev; > + struct mipi_dsi_host *host; > + struct mipi_dsi_device *dsi; > + int ret; > + > + const struct mipi_dsi_device_info info = { .type = "tc358775", > + .channel = 0, > + .node = NULL, > + }; > + > + host = of_find_mipi_dsi_host_by_node(tc->host_node); > + if (!host) { > + dev_err(dev, "failed to find dsi host\n"); > + return -EPROBE_DEFER; > + } > + > + dsi = mipi_dsi_device_register_full(host, &info); > + if (IS_ERR(dsi)) { > + dev_err(dev, "failed to create dsi device\n"); > + ret = PTR_ERR(dsi); > + goto err_dsi_device; > + } > + > + tc->dsi = dsi; > + > + dsi->lanes = tc->num_dsi_lanes; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + dev_err(dev, "failed to attach dsi to host\n"); > + goto err_dsi_attach; > + } > + > + /* Attach the panel-bridge to the dsi bridge */ > + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, > + &tc->bridge, flags); > +err_dsi_attach: > + mipi_dsi_device_unregister(dsi); > +err_dsi_device: > + return ret; > +} > + > +static const struct drm_bridge_funcs tc_bridge_funcs = { > + .attach = tc_bridge_attach, > + .pre_enable = tc_bridge_pre_enable, > + .enable = tc_bridge_enable, > + .mode_valid = tc_mode_valid, > + .post_disable = tc_bridge_post_disable, > +}; > + > +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct drm_panel *panel; > + struct tc_data *tc; > + int ret; > + > + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); > + if (!tc) > + return -ENOMEM; > + > + tc->dev = dev; > + tc->i2c = client; > + > + ret = drm_of_find_panel_or_bridge(dev->of_node, TC358775_LVDS_OUT0, > + 0, &panel, NULL); > + if (ret < 0) > + return ret; > + if (!panel) > + return -ENODEV; > + > + tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > + if (IS_ERR(tc->panel_bridge)) > + return PTR_ERR(tc->panel_bridge); > + > + ret = tc358775_parse_dt(dev->of_node, tc); > + if (ret) > + return ret; > + > + tc->vddio = devm_regulator_get(dev, "vddio-supply"); > + if (IS_ERR(tc->vddio)) { > + ret = PTR_ERR(tc->vddio); > + dev_err(dev, "vddio-supply not found\n"); > + return ret; > + } > + > + tc->vdd = devm_regulator_get(dev, "vdd-supply"); > + if (IS_ERR(tc->vdd)) { > + ret = PTR_ERR(tc->vddio); > + dev_err(dev, "vdd-supply not found\n"); > + return ret; > + } > + > + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); > + if (IS_ERR(tc->stby_gpio)) { > + ret = PTR_ERR(tc->stby_gpio); > + dev_err(dev, "cannot get stby-gpio %d\n", ret); > + return ret; > + } > + > + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(tc->reset_gpio)) { > + ret = PTR_ERR(tc->reset_gpio); > + dev_err(dev, "cannot get reset-gpios %d\n", ret); > + return ret; > + } > + > + tc->bridge.funcs = &tc_bridge_funcs; > + tc->bridge.of_node = dev->of_node; > + drm_bridge_add(&tc->bridge); > + > + i2c_set_clientdata(client, tc); > + > + return 0; > +} > + > +static int tc_remove(struct i2c_client *client) > +{ > + struct tc_data *tc = i2c_get_clientdata(client); > + > + drm_bridge_remove(&tc->bridge); > + > + return 0; > +} > + > +static const struct i2c_device_id tc358775_i2c_ids[] = { > + { "tc358775", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); > + > +static const struct of_device_id tc358775_of_ids[] = { > + { .compatible = "toshiba,tc358775", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, tc358775_of_ids); > + > +static struct i2c_driver tc358775_driver = { > + .driver = { > + .name = "tc358775", > + .of_match_table = tc358775_of_ids, > + }, > + .id_table = tc358775_i2c_ids, > + .probe = tc_probe, > + .remove = tc_remove, > +}; > +module_i2c_driver(tc358775_driver); > + > +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); > +MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver"); > +MODULE_LICENSE("GPL v2"); > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Neil, yaml is the v3 version, there was no change , so i had not created v4 for yaml [PATCH v3 2/2] display/drm/bridge: TC358775 DSI/LVDS driver On Mon, Jun 29, 2020 at 2:08 PM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Hi, > > On 21/06/2020 17:38, Vinay Simha BN wrote: > > Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> > > > > --- > > v1: > > Initial version > > > > v2: > > * Andrzej Hajda review comments incorporated > > SPDX identifier > > development debug removed > > alphabetic order headers > > u32 instead of unit32_t > > magic numbers to macros for CLRSI and mux registers > > ignored return value > > > > * Laurent Pinchart review comments incorporated > > mdelay to usleep_range > > bus_formats added > > > > v3: > > * Andrzej Hajda review comments incorporated > > drm_connector_status removed > > u32 rev removed and local variabl is used > > regulator enable disable with proper orders and delays > > as per the spec > > devm_drm_panel_bridge_add method used instead of panel > > description modified > > dual port implemented > > > > v4: > > * Sam Ravnborg review comments incorporated > > panel->connector_type removed > > > > * Reported-by: kernel test robot <lkp@intel.com> > > parse_dt to static function > > removed the if (endpoint), since data-lanes has to be > > present for dsi dts ports > > I maybe missed something, but you should also post a YAML DT bindings > file associated to the driver. > > Neil > > > > --- > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/tc358775.c | 721 ++++++++++++++++++++++++++++++ > > 3 files changed, 732 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/tc358775.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index 43271c21d3fc..084e9853944a 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -181,6 +181,16 @@ config DRM_TOSHIBA_TC358768 > > help > > Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. > > > > +config DRM_TOSHIBA_TC358775 > > + tristate "Toshiba TC358775 LVDS bridge" > > + depends on OF > > + select DRM_KMS_HELPER > > + select REGMAP_I2C > > + select DRM_PANEL > > + select DRM_MIPI_DSI > > + ---help--- > > + Toshiba TC358775 LVDS bridge chip driver. > > + > > config DRM_TI_TFP410 > > tristate "TI TFP410 DVI/HDMI bridge" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index d63d4b7e4347..23c770b3bfe4 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -15,6 +15,7 @@ obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o > > obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o > > obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o > > obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o > > +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o > > obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ > > obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o > > obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o > > diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c > > new file mode 100644 > > index 000000000000..8c9bd4e77bfd > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/tc358775.c > > @@ -0,0 +1,721 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * tc358775 DSI to LVDS bridge driver > > + * > > + * Copyright (C) 2020 SMART Wireless Computing > > + * Author: Vinay Simha BN <simhavcs@gmail.com> > > + * > > + */ > > +//#define DEBUG > > +#include <linux/clk.h> > > +#include <linux/device.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/regulator/consumer.h> > > +#include <linux/slab.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_dp_helper.h> > > +#include <drm/drm_mipi_dsi.h> > > +#include <drm/drm_of.h> > > +#include <drm/drm_panel.h> > > +#include <drm/drm_probe_helper.h> > > + > > +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) > > +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) > > + > > +/* Registers */ > > + > > +/* DSI D-PHY Layer Registers */ > > +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ > > +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ > > +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ > > +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ > > +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ > > +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ > > +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ > > +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ > > +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ > > +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ > > +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ > > +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ > > +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ > > + > > +/* DSI PPI Layer Registers */ > > +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ > > +#define PPI_START_FUNCTION 1 > > + > > +#define PPI_BUSYPPI 0x0108 > > +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ > > +#define PPI_LPTXTIMECNT 0x0114 > > +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ > > +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ > > + > > +/* Analog timer function enable */ > > +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ > > +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ > > +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ > > +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ > > +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ > > + > > +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ > > +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ > > +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ > > +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ > > + > > +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ > > +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ > > +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ > > +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ > > +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ > > +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ > > +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ > > +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ > > +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ > > +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ > > +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ > > +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ > > +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ > > +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ > > +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ > > + > > +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ > > +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ > > +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ > > +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ > > +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ > > +#define DSI_RX_START 1 > > + > > +#define DSI_BUSYDSI 0x0208 > > +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ > > +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ > > +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ > > + > > +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ > > +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ > > +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ > > +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ > > + > > +#define DSIERRCNT 0x0300 /* DSI Error Count */ > > +#define APLCTRL 0x0400 /* Application Layer Control */ > > +#define RDPKTLN 0x0404 /* Command Read Packet Length */ > > + > > +#define VPCTRL 0x0450 /* Video Path Control */ > > +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ > > +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ > > +#define VTIM1 0x045C /* Vertical Timing Control 1 */ > > +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ > > +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ > > +#define VFUEN_EN BIT(0) /* Upload Enable */ > > + > > +/* Mux Input Select for LVDS LINK Input */ > > +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ > > +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ > > +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ > > +#define LV_MX1215 0x048C /* Bit 12 to 15 */ > > +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ > > +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ > > +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ > > +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ > > + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) > > + > > +/* Input bit numbers used in mux registers */ > > +enum { > > + LVI_R0, > > + LVI_R1, > > + LVI_R2, > > + LVI_R3, > > + LVI_R4, > > + LVI_R5, > > + LVI_R6, > > + LVI_R7, > > + LVI_G0, > > + LVI_G1, > > + LVI_G2, > > + LVI_G3, > > + LVI_G4, > > + LVI_G5, > > + LVI_G6, > > + LVI_G7, > > + LVI_B0, > > + LVI_B1, > > + LVI_B2, > > + LVI_B3, > > + LVI_B4, > > + LVI_B5, > > + LVI_B6, > > + LVI_B7, > > + LVI_HS, > > + LVI_VS, > > + LVI_DE, > > + LVI_L0 > > +}; > > + > > +#define LVCFG 0x049C /* LVDS Configuration */ > > +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ > > +#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ > > +#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) > > +#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */ > > +#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */ > > + > > +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ > > +#define SYSSTAT 0x0500 /* System Status */ > > +#define SYSRST 0x0504 /* System Reset */ > > + > > +#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ > > +#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ > > +#define SYS_RST_LCD BIT(2) /* Reset LCD controller */ > > +#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ > > +#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ > > +#define SYS_RST_REG BIT(5) /* Reset Register module */ > > + > > +/* GPIO Registers */ > > +#define GPIOC 0x0520 /* GPIO Control */ > > +#define GPIOO 0x0524 /* GPIO Output */ > > +#define GPIOI 0x0528 /* GPIO Input */ > > + > > +/* I2C Registers */ > > +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ > > +#define I2CMADDR 0x0544 /* I2C Master Addressing */ > > +#define WDATAQ 0x0548 /* Write Data Queue */ > > +#define RDATAQ 0x054C /* Read Data Queue */ > > + > > +/* Chip ID and Revision ID Register */ > > +#define IDREG 0x0580 > > + > > +#define LPX_PERIOD 4 > > +#define TTA_GET 0x40000 > > +#define TTA_SURE 6 > > + > > +#define TC358775XBG_ID 0x00007500 > > + > > +/* Debug Registers */ > > +#define DEBUG00 0x05A0 /* Debug */ > > +#define DEBUG01 0x05A4 /* LVDS Data */ > > + > > +#define DSI_CLEN_BIT BIT(0) > > +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ > > +#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */ > > +#define LVCFG_LVEN_BIT BIT(0) > > + > > +#define L0EN BIT(1) > > + > > +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 > > +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 > > +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) > > +{ > > + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & > > + TC358775_VPCTRL_VSDELAY__MASK; > > +} > > + > > +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 > > +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 > > +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) > > +{ > > + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & > > + TC358775_VPCTRL_OPXLFMT__MASK; > > +} > > + > > +#define TC358775_VPCTRL_MSF__MASK 0x00000001 > > +#define TC358775_VPCTRL_MSF__SHIFT 0 > > +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) > > +{ > > + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & > > + TC358775_VPCTRL_MSF__MASK; > > +} > > + > > +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 > > +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 > > +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) > > +{ > > + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & > > + TC358775_LVCFG_PCLKDIV__MASK; > > +} > > + > > +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 > > +#define TC358775_LVCFG_LVDLINK__SHIFT 0 > > +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) > > +{ > > + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & > > + TC358775_LVCFG_LVDLINK__MASK; > > +} > > + > > +enum tc358775_ports { > > + TC358775_DSI_IN, > > + TC358775_LVDS_OUT0, > > + TC358775_LVDS_OUT1, > > +}; > > + > > +struct tc_data { > > + struct i2c_client *i2c; > > + struct device *dev; > > + > > + struct drm_bridge bridge; > > + struct drm_bridge *panel_bridge; > > + > > + struct device_node *host_node; > > + struct mipi_dsi_device *dsi; > > + u8 num_dsi_lanes; > > + > > + struct regulator *vdd; > > + struct regulator *vddio; > > + struct gpio_desc *reset_gpio; > > + struct gpio_desc *stby_gpio; > > + bool dual_link; /* single-link or dual-link */ > > +}; > > + > > +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) > > +{ > > + return container_of(b, struct tc_data, bridge); > > +} > > + > > +static void tc_bridge_pre_enable(struct drm_bridge *bridge) > > +{ > > + struct tc_data *tc = bridge_to_tc(bridge); > > + struct device *dev = &tc->dsi->dev; > > + int ret; > > + > > + ret = regulator_enable(tc->vddio); > > + if (ret < 0) > > + dev_err(dev, "regulator vddio enable failed, %d\n", ret); > > + usleep_range(10000, 11000); > > + > > + ret = regulator_enable(tc->vdd); > > + if (ret < 0) > > + dev_err(dev, "regulator vdd enable failed, %d\n", ret); > > + usleep_range(10000, 11000); > > + > > + gpiod_set_value(tc->stby_gpio, 0); > > + usleep_range(10000, 11000); > > + > > + gpiod_set_value(tc->reset_gpio, 0); > > + usleep_range(10, 20); > > +} > > + > > +static void tc_bridge_post_disable(struct drm_bridge *bridge) > > +{ > > + struct tc_data *tc = bridge_to_tc(bridge); > > + struct device *dev = &tc->dsi->dev; > > + int ret; > > + > > + ret = regulator_disable(tc->vddio); > > + if (ret < 0) > > + dev_err(dev, "regulator vddio disable failed, %d\n", ret); > > + usleep_range(10000, 11000); > > + > > + ret = regulator_disable(tc->vdd); > > + if (ret < 0) > > + dev_err(dev, "regulator vdd disable failed, %d\n", ret); > > + usleep_range(10000, 11000); > > + > > + gpiod_set_value(tc->stby_gpio, 1); > > + usleep_range(10000, 11000); > > + > > + gpiod_set_value(tc->reset_gpio, 1); > > + usleep_range(10, 20); > > +} > > + > > +static u32 d2l_read(struct i2c_client *i2c, u16 reg) > > +{ > > + int ret; > > + u8 val[4]; > > + u8 addr[] = {(reg >> 8) & 0xff, reg & 0xff}; > > + u32 value; > > + > > + ret = i2c_master_send(i2c, addr, sizeof(reg)); > > + if (ret < 0) > > + goto fail; > > + > > + ret = i2c_master_recv(i2c, val, sizeof(value)); > > + if (ret < 0) > > + goto fail; > > + > > + value = val[3] << 24 | val[2] << 16 | val[1] << 8 | val[0]; > > + > > + pr_debug("d2l: I2C : reg:%04x value:%08x\n", reg, value); > > + > > + return value; > > + > > +fail: > > + dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n", > > + ret, reg); > > + return 0; > > +} > > + > > +static void d2l_write(struct i2c_client *i2c, u16 reg, u32 val) > > +{ > > + u8 buf[6]; > > + int ret; > > + > > + buf[0] = reg >> 8; > > + buf[1] = reg & 0xFF; > > + buf[2] = (val >> 0) & 0xFF; > > + buf[3] = (val >> 8) & 0xFF; > > + buf[4] = (val >> 16) & 0xFF; > > + buf[5] = (val >> 24) & 0xFF; > > + > > + ret = i2c_master_send(i2c, buf, ARRAY_SIZE(buf)); > > + if (ret < 0) > > + dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n", > > + ret, reg); > > +} > > + > > +/* helper function to access bus_formats */ > > +static struct drm_connector *get_connector(struct drm_encoder *encoder) > > +{ > > + struct drm_device *dev = encoder->dev; > > + struct drm_connector *connector; > > + > > + list_for_each_entry(connector, &dev->mode_config.connector_list, head) > > + if (connector->encoder == encoder) > > + return connector; > > + > > + return NULL; > > +} > > + > > +static void tc_bridge_enable(struct drm_bridge *bridge) > > +{ > > + struct tc_data *tc = bridge_to_tc(bridge); > > + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; > > + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; > > + u32 val = 0; > > + u16 bus_formats; > > + struct drm_display_mode *mode; > > + struct drm_connector *connector = get_connector(bridge->encoder); > > + > > + mode = &bridge->encoder->crtc->state->adjusted_mode; > > + > > + hbpr = mode->htotal - mode->hsync_end; > > + hpw = mode->hsync_end - mode->hsync_start; > > + vbpr = mode->vtotal - mode->vsync_end; > > + vpw = mode->vsync_end - mode->vsync_start; > > + > > + htime1 = (hbpr << 16) + hpw; > > + vtime1 = (vbpr << 16) + vpw; > > + > > + hfpr = mode->hsync_start - mode->hdisplay; > > + hsize = mode->hdisplay; > > + vfpr = mode->vsync_start - mode->vdisplay; > > + vsize = mode->vdisplay; > > + > > + htime2 = (hfpr << 16) + hsize; > > + vtime2 = (vfpr << 16) + vsize; > > + > > + val = d2l_read(tc->i2c, IDREG); > > + > > + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n", > > + (val >> 8) & 0xFF, val & 0xFF); > > + > > + d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM | > > + SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS); > > + usleep_range(30000, 40000); > > + > > + d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE); > > + d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD); > > + d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3); > > + d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3); > > + d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3); > > + d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3); > > + > > + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; > > + d2l_write(tc->i2c, PPI_LANEENABLE, val); > > + d2l_write(tc->i2c, DSI_LANEENABLE, val); > > + > > + d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); > > + d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); > > + > > + val = TC358775_VPCTRL_VSDELAY(21); > > + > > + bus_formats = connector->display_info.bus_formats[0]; > > + dev_dbg(tc->dev, "bus_formats : %04x\n", bus_formats); > > + > > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG || > > + bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { > > + /* RGB888 */ > > + val |= TC358775_VPCTRL_OPXLFMT(1); > > + d2l_write(tc->i2c, VPCTRL, val); > > + } else { > > + /* RGB666 */ > > + val |= TC358775_VPCTRL_MSF(1); > > + d2l_write(tc->i2c, VPCTRL, val); > > + } > > + > > + d2l_write(tc->i2c, HTIM1, htime1); > > + d2l_write(tc->i2c, VTIM1, vtime1); > > + d2l_write(tc->i2c, HTIM2, htime2); > > + d2l_write(tc->i2c, VTIM2, vtime2); > > + > > + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > > + d2l_write(tc->i2c, SYSRST, SYS_RST_LCD); > > + d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6)); > > + > > + /* default jeida-24 */ > > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { > > + /* vesa-24 */ > > + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); > > + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); > > + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); > > + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); > > + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); > > + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); > > + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); > > + } > > + > > + if (bus_formats == MEDIA_BUS_FMT_RGB666_1X7X3_SPWG) { > > + /* jeida-18 */ > > + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); > > + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0)); > > + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0)); > > + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); > > + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2)); > > + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); > > + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0)); > > + } > > + > > + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > > + > > + val = LVCFG_LVEN_BIT; > > + if (tc->dual_link) { > > + val |= TC358775_LVCFG_LVDLINK(1); > > + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6); > > + } else { > > + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3); > > + } > > + > > + d2l_write(tc->i2c, LVCFG, val); > > +} > > + > > +static int tc_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode) > > +{ > > + struct tc_data *tc = bridge_to_tc(bridge); > > + > > + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ > > + if ((mode->clock > 135000 && tc->dual_link) || > > + (mode->clock > 270000 && tc->dual_link)) > > + return MODE_CLOCK_HIGH; > > + > > + return MODE_OK; > > +} > > + > > +static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) > > +{ > > + struct device_node *endpoint; > > + struct device_node *parent; > > + struct device_node *remote; > > + struct property *prop; > > + int len; > > + > > + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > > + TC358775_DSI_IN, -1); > > + if (endpoint) { > > + /* dsi0_out node */ > > + parent = of_graph_get_remote_port_parent(endpoint); > > + of_node_put(endpoint); > > + if (parent) { > > + /* dsi0 port 1 */ > > + endpoint = of_graph_get_endpoint_by_regs(parent, 1, -1); > > + of_node_put(parent); > > + prop = of_find_property(endpoint, "data-lanes", > > + &len); > > + of_node_put(endpoint); > > + if (!prop) { > > + dev_err(tc->dev, > > + "failed to find data lane\n"); > > + return -EPROBE_DEFER; > > + } > > + } > > + } > > + > > + tc->num_dsi_lanes = len / sizeof(u32); > > + > > + if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4) > > + return -EINVAL; > > + > > + tc->host_node = of_graph_get_remote_node(np, 0, 0); > > + if (!tc->host_node) > > + return -ENODEV; > > + > > + of_node_put(tc->host_node); > > + > > + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > > + TC358775_LVDS_OUT1, -1); > > + if (endpoint) { > > + remote = of_graph_get_remote_port_parent(endpoint); > > + of_node_put(endpoint); > > + > > + if (remote) { > > + if (of_device_is_available(remote)) > > + tc->dual_link = true; > > + of_node_put(remote); > > + } > > + } > > + > > + dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes); > > + dev_dbg(tc->dev, "operating in %s-link mode\n", > > + tc->dual_link ? "dual" : "single"); > > + > > + return 0; > > +} > > + > > +static int tc_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) > > +{ > > + struct tc_data *tc = bridge_to_tc(bridge); > > + struct device *dev = &tc->i2c->dev; > > + struct mipi_dsi_host *host; > > + struct mipi_dsi_device *dsi; > > + int ret; > > + > > + const struct mipi_dsi_device_info info = { .type = "tc358775", > > + .channel = 0, > > + .node = NULL, > > + }; > > + > > + host = of_find_mipi_dsi_host_by_node(tc->host_node); > > + if (!host) { > > + dev_err(dev, "failed to find dsi host\n"); > > + return -EPROBE_DEFER; > > + } > > + > > + dsi = mipi_dsi_device_register_full(host, &info); > > + if (IS_ERR(dsi)) { > > + dev_err(dev, "failed to create dsi device\n"); > > + ret = PTR_ERR(dsi); > > + goto err_dsi_device; > > + } > > + > > + tc->dsi = dsi; > > + > > + dsi->lanes = tc->num_dsi_lanes; > > + dsi->format = MIPI_DSI_FMT_RGB888; > > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; > > + > > + ret = mipi_dsi_attach(dsi); > > + if (ret < 0) { > > + dev_err(dev, "failed to attach dsi to host\n"); > > + goto err_dsi_attach; > > + } > > + > > + /* Attach the panel-bridge to the dsi bridge */ > > + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, > > + &tc->bridge, flags); > > +err_dsi_attach: > > + mipi_dsi_device_unregister(dsi); > > +err_dsi_device: > > + return ret; > > +} > > + > > +static const struct drm_bridge_funcs tc_bridge_funcs = { > > + .attach = tc_bridge_attach, > > + .pre_enable = tc_bridge_pre_enable, > > + .enable = tc_bridge_enable, > > + .mode_valid = tc_mode_valid, > > + .post_disable = tc_bridge_post_disable, > > +}; > > + > > +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct drm_panel *panel; > > + struct tc_data *tc; > > + int ret; > > + > > + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); > > + if (!tc) > > + return -ENOMEM; > > + > > + tc->dev = dev; > > + tc->i2c = client; > > + > > + ret = drm_of_find_panel_or_bridge(dev->of_node, TC358775_LVDS_OUT0, > > + 0, &panel, NULL); > > + if (ret < 0) > > + return ret; > > + if (!panel) > > + return -ENODEV; > > + > > + tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > + if (IS_ERR(tc->panel_bridge)) > > + return PTR_ERR(tc->panel_bridge); > > + > > + ret = tc358775_parse_dt(dev->of_node, tc); > > + if (ret) > > + return ret; > > + > > + tc->vddio = devm_regulator_get(dev, "vddio-supply"); > > + if (IS_ERR(tc->vddio)) { > > + ret = PTR_ERR(tc->vddio); > > + dev_err(dev, "vddio-supply not found\n"); > > + return ret; > > + } > > + > > + tc->vdd = devm_regulator_get(dev, "vdd-supply"); > > + if (IS_ERR(tc->vdd)) { > > + ret = PTR_ERR(tc->vddio); > > + dev_err(dev, "vdd-supply not found\n"); > > + return ret; > > + } > > + > > + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); > > + if (IS_ERR(tc->stby_gpio)) { > > + ret = PTR_ERR(tc->stby_gpio); > > + dev_err(dev, "cannot get stby-gpio %d\n", ret); > > + return ret; > > + } > > + > > + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > > + if (IS_ERR(tc->reset_gpio)) { > > + ret = PTR_ERR(tc->reset_gpio); > > + dev_err(dev, "cannot get reset-gpios %d\n", ret); > > + return ret; > > + } > > + > > + tc->bridge.funcs = &tc_bridge_funcs; > > + tc->bridge.of_node = dev->of_node; > > + drm_bridge_add(&tc->bridge); > > + > > + i2c_set_clientdata(client, tc); > > + > > + return 0; > > +} > > + > > +static int tc_remove(struct i2c_client *client) > > +{ > > + struct tc_data *tc = i2c_get_clientdata(client); > > + > > + drm_bridge_remove(&tc->bridge); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id tc358775_i2c_ids[] = { > > + { "tc358775", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); > > + > > +static const struct of_device_id tc358775_of_ids[] = { > > + { .compatible = "toshiba,tc358775", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, tc358775_of_ids); > > + > > +static struct i2c_driver tc358775_driver = { > > + .driver = { > > + .name = "tc358775", > > + .of_match_table = tc358775_of_ids, > > + }, > > + .id_table = tc358775_i2c_ids, > > + .probe = tc_probe, > > + .remove = tc_remove, > > +}; > > +module_i2c_driver(tc358775_driver); > > + > > +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); > > +MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver"); > > +MODULE_LICENSE("GPL v2"); > > > -- regards, vinaysimha _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi, On 29/06/2020 10:47, Vinay Simha B N wrote: > Neil, > > yaml is the v3 version, there was no change , so i had not created v4 for yaml > [PATCH v3 2/2] display/drm/bridge: TC358775 DSI/LVDS driver > OK, please resend the whole patchset even with unchanged patches, you can explain which patches were not changed on the cover letter. Neil > > On Mon, Jun 29, 2020 at 2:08 PM Neil Armstrong <narmstrong@baylibre.com> wrote: >> >> Hi, >> >> On 21/06/2020 17:38, Vinay Simha BN wrote: >>> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> >>> >>> --- >>> v1: >>> Initial version >>> >>> v2: >>> * Andrzej Hajda review comments incorporated >>> SPDX identifier >>> development debug removed >>> alphabetic order headers >>> u32 instead of unit32_t >>> magic numbers to macros for CLRSI and mux registers >>> ignored return value >>> >>> * Laurent Pinchart review comments incorporated >>> mdelay to usleep_range >>> bus_formats added >>> >>> v3: >>> * Andrzej Hajda review comments incorporated >>> drm_connector_status removed >>> u32 rev removed and local variabl is used >>> regulator enable disable with proper orders and delays >>> as per the spec >>> devm_drm_panel_bridge_add method used instead of panel >>> description modified >>> dual port implemented >>> >>> v4: >>> * Sam Ravnborg review comments incorporated >>> panel->connector_type removed >>> >>> * Reported-by: kernel test robot <lkp@intel.com> >>> parse_dt to static function >>> removed the if (endpoint), since data-lanes has to be >>> present for dsi dts ports >> >> I maybe missed something, but you should also post a YAML DT bindings >> file associated to the driver. >> >> Neil >> >> >>> --- >>> drivers/gpu/drm/bridge/Kconfig | 10 + >>> drivers/gpu/drm/bridge/Makefile | 1 + >>> drivers/gpu/drm/bridge/tc358775.c | 721 ++++++++++++++++++++++++++++++ >>> 3 files changed, 732 insertions(+) >>> create mode 100644 drivers/gpu/drm/bridge/tc358775.c >>> >>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig >>> index 43271c21d3fc..084e9853944a 100644 >>> --- a/drivers/gpu/drm/bridge/Kconfig >>> +++ b/drivers/gpu/drm/bridge/Kconfig >>> @@ -181,6 +181,16 @@ config DRM_TOSHIBA_TC358768 >>> help >>> Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. >>> >>> +config DRM_TOSHIBA_TC358775 >>> + tristate "Toshiba TC358775 LVDS bridge" >>> + depends on OF >>> + select DRM_KMS_HELPER >>> + select REGMAP_I2C >>> + select DRM_PANEL >>> + select DRM_MIPI_DSI >>> + ---help--- >>> + Toshiba TC358775 LVDS bridge chip driver. >>> + >>> config DRM_TI_TFP410 >>> tristate "TI TFP410 DVI/HDMI bridge" >>> depends on OF >>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile >>> index d63d4b7e4347..23c770b3bfe4 100644 >>> --- a/drivers/gpu/drm/bridge/Makefile >>> +++ b/drivers/gpu/drm/bridge/Makefile >>> @@ -15,6 +15,7 @@ obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o >>> obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o >>> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o >>> obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o >>> +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o >>> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ >>> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o >>> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o >>> diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c >>> new file mode 100644 >>> index 000000000000..8c9bd4e77bfd >>> --- /dev/null >>> +++ b/drivers/gpu/drm/bridge/tc358775.c >>> @@ -0,0 +1,721 @@ >>> +// SPDX-License-Identifier: GPL-2.0 >>> +/* >>> + * tc358775 DSI to LVDS bridge driver >>> + * >>> + * Copyright (C) 2020 SMART Wireless Computing >>> + * Author: Vinay Simha BN <simhavcs@gmail.com> >>> + * >>> + */ >>> +//#define DEBUG >>> +#include <linux/clk.h> >>> +#include <linux/device.h> >>> +#include <linux/gpio/consumer.h> >>> +#include <linux/i2c.h> >>> +#include <linux/kernel.h> >>> +#include <linux/module.h> >>> +#include <linux/regulator/consumer.h> >>> +#include <linux/slab.h> >>> + >>> +#include <drm/drm_atomic_helper.h> >>> +#include <drm/drm_bridge.h> >>> +#include <drm/drm_crtc_helper.h> >>> +#include <drm/drm_dp_helper.h> >>> +#include <drm/drm_mipi_dsi.h> >>> +#include <drm/drm_of.h> >>> +#include <drm/drm_panel.h> >>> +#include <drm/drm_probe_helper.h> >>> + >>> +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) >>> +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) >>> + >>> +/* Registers */ >>> + >>> +/* DSI D-PHY Layer Registers */ >>> +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ >>> +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ >>> +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ >>> +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ >>> +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ >>> +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ >>> +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ >>> +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ >>> +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ >>> +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ >>> +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ >>> +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ >>> +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ >>> + >>> +/* DSI PPI Layer Registers */ >>> +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ >>> +#define PPI_START_FUNCTION 1 >>> + >>> +#define PPI_BUSYPPI 0x0108 >>> +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ >>> +#define PPI_LPTXTIMECNT 0x0114 >>> +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ >>> +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ >>> + >>> +/* Analog timer function enable */ >>> +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ >>> +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ >>> +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ >>> +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ >>> +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ >>> + >>> +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ >>> +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ >>> +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ >>> +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ >>> + >>> +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ >>> +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ >>> +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ >>> +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ >>> +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ >>> +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ >>> +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ >>> +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ >>> +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ >>> +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ >>> +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ >>> +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ >>> +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ >>> +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ >>> +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ >>> + >>> +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ >>> +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ >>> +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ >>> +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ >>> +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ >>> +#define DSI_RX_START 1 >>> + >>> +#define DSI_BUSYDSI 0x0208 >>> +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ >>> +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ >>> +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ >>> + >>> +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ >>> +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ >>> +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ >>> +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ >>> + >>> +#define DSIERRCNT 0x0300 /* DSI Error Count */ >>> +#define APLCTRL 0x0400 /* Application Layer Control */ >>> +#define RDPKTLN 0x0404 /* Command Read Packet Length */ >>> + >>> +#define VPCTRL 0x0450 /* Video Path Control */ >>> +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ >>> +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ >>> +#define VTIM1 0x045C /* Vertical Timing Control 1 */ >>> +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ >>> +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ >>> +#define VFUEN_EN BIT(0) /* Upload Enable */ >>> + >>> +/* Mux Input Select for LVDS LINK Input */ >>> +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ >>> +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ >>> +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ >>> +#define LV_MX1215 0x048C /* Bit 12 to 15 */ >>> +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ >>> +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ >>> +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ >>> +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ >>> + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) >>> + >>> +/* Input bit numbers used in mux registers */ >>> +enum { >>> + LVI_R0, >>> + LVI_R1, >>> + LVI_R2, >>> + LVI_R3, >>> + LVI_R4, >>> + LVI_R5, >>> + LVI_R6, >>> + LVI_R7, >>> + LVI_G0, >>> + LVI_G1, >>> + LVI_G2, >>> + LVI_G3, >>> + LVI_G4, >>> + LVI_G5, >>> + LVI_G6, >>> + LVI_G7, >>> + LVI_B0, >>> + LVI_B1, >>> + LVI_B2, >>> + LVI_B3, >>> + LVI_B4, >>> + LVI_B5, >>> + LVI_B6, >>> + LVI_B7, >>> + LVI_HS, >>> + LVI_VS, >>> + LVI_DE, >>> + LVI_L0 >>> +}; >>> + >>> +#define LVCFG 0x049C /* LVDS Configuration */ >>> +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ >>> +#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ >>> +#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) >>> +#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */ >>> +#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */ >>> + >>> +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ >>> +#define SYSSTAT 0x0500 /* System Status */ >>> +#define SYSRST 0x0504 /* System Reset */ >>> + >>> +#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ >>> +#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ >>> +#define SYS_RST_LCD BIT(2) /* Reset LCD controller */ >>> +#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ >>> +#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ >>> +#define SYS_RST_REG BIT(5) /* Reset Register module */ >>> + >>> +/* GPIO Registers */ >>> +#define GPIOC 0x0520 /* GPIO Control */ >>> +#define GPIOO 0x0524 /* GPIO Output */ >>> +#define GPIOI 0x0528 /* GPIO Input */ >>> + >>> +/* I2C Registers */ >>> +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ >>> +#define I2CMADDR 0x0544 /* I2C Master Addressing */ >>> +#define WDATAQ 0x0548 /* Write Data Queue */ >>> +#define RDATAQ 0x054C /* Read Data Queue */ >>> + >>> +/* Chip ID and Revision ID Register */ >>> +#define IDREG 0x0580 >>> + >>> +#define LPX_PERIOD 4 >>> +#define TTA_GET 0x40000 >>> +#define TTA_SURE 6 >>> + >>> +#define TC358775XBG_ID 0x00007500 >>> + >>> +/* Debug Registers */ >>> +#define DEBUG00 0x05A0 /* Debug */ >>> +#define DEBUG01 0x05A4 /* LVDS Data */ >>> + >>> +#define DSI_CLEN_BIT BIT(0) >>> +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ >>> +#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */ >>> +#define LVCFG_LVEN_BIT BIT(0) >>> + >>> +#define L0EN BIT(1) >>> + >>> +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 >>> +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 >>> +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) >>> +{ >>> + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & >>> + TC358775_VPCTRL_VSDELAY__MASK; >>> +} >>> + >>> +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 >>> +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 >>> +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) >>> +{ >>> + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & >>> + TC358775_VPCTRL_OPXLFMT__MASK; >>> +} >>> + >>> +#define TC358775_VPCTRL_MSF__MASK 0x00000001 >>> +#define TC358775_VPCTRL_MSF__SHIFT 0 >>> +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) >>> +{ >>> + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & >>> + TC358775_VPCTRL_MSF__MASK; >>> +} >>> + >>> +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 >>> +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 >>> +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) >>> +{ >>> + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & >>> + TC358775_LVCFG_PCLKDIV__MASK; >>> +} >>> + >>> +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 >>> +#define TC358775_LVCFG_LVDLINK__SHIFT 0 >>> +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) >>> +{ >>> + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & >>> + TC358775_LVCFG_LVDLINK__MASK; >>> +} >>> + >>> +enum tc358775_ports { >>> + TC358775_DSI_IN, >>> + TC358775_LVDS_OUT0, >>> + TC358775_LVDS_OUT1, >>> +}; >>> + >>> +struct tc_data { >>> + struct i2c_client *i2c; >>> + struct device *dev; >>> + >>> + struct drm_bridge bridge; >>> + struct drm_bridge *panel_bridge; >>> + >>> + struct device_node *host_node; >>> + struct mipi_dsi_device *dsi; >>> + u8 num_dsi_lanes; >>> + >>> + struct regulator *vdd; >>> + struct regulator *vddio; >>> + struct gpio_desc *reset_gpio; >>> + struct gpio_desc *stby_gpio; >>> + bool dual_link; /* single-link or dual-link */ >>> +}; >>> + >>> +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) >>> +{ >>> + return container_of(b, struct tc_data, bridge); >>> +} >>> + >>> +static void tc_bridge_pre_enable(struct drm_bridge *bridge) >>> +{ >>> + struct tc_data *tc = bridge_to_tc(bridge); >>> + struct device *dev = &tc->dsi->dev; >>> + int ret; >>> + >>> + ret = regulator_enable(tc->vddio); >>> + if (ret < 0) >>> + dev_err(dev, "regulator vddio enable failed, %d\n", ret); >>> + usleep_range(10000, 11000); >>> + >>> + ret = regulator_enable(tc->vdd); >>> + if (ret < 0) >>> + dev_err(dev, "regulator vdd enable failed, %d\n", ret); >>> + usleep_range(10000, 11000); >>> + >>> + gpiod_set_value(tc->stby_gpio, 0); >>> + usleep_range(10000, 11000); >>> + >>> + gpiod_set_value(tc->reset_gpio, 0); >>> + usleep_range(10, 20); >>> +} >>> + >>> +static void tc_bridge_post_disable(struct drm_bridge *bridge) >>> +{ >>> + struct tc_data *tc = bridge_to_tc(bridge); >>> + struct device *dev = &tc->dsi->dev; >>> + int ret; >>> + >>> + ret = regulator_disable(tc->vddio); >>> + if (ret < 0) >>> + dev_err(dev, "regulator vddio disable failed, %d\n", ret); >>> + usleep_range(10000, 11000); >>> + >>> + ret = regulator_disable(tc->vdd); >>> + if (ret < 0) >>> + dev_err(dev, "regulator vdd disable failed, %d\n", ret); >>> + usleep_range(10000, 11000); >>> + >>> + gpiod_set_value(tc->stby_gpio, 1); >>> + usleep_range(10000, 11000); >>> + >>> + gpiod_set_value(tc->reset_gpio, 1); >>> + usleep_range(10, 20); >>> +} >>> + >>> +static u32 d2l_read(struct i2c_client *i2c, u16 reg) >>> +{ >>> + int ret; >>> + u8 val[4]; >>> + u8 addr[] = {(reg >> 8) & 0xff, reg & 0xff}; >>> + u32 value; >>> + >>> + ret = i2c_master_send(i2c, addr, sizeof(reg)); >>> + if (ret < 0) >>> + goto fail; >>> + >>> + ret = i2c_master_recv(i2c, val, sizeof(value)); >>> + if (ret < 0) >>> + goto fail; >>> + >>> + value = val[3] << 24 | val[2] << 16 | val[1] << 8 | val[0]; >>> + >>> + pr_debug("d2l: I2C : reg:%04x value:%08x\n", reg, value); >>> + >>> + return value; >>> + >>> +fail: >>> + dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n", >>> + ret, reg); >>> + return 0; >>> +} >>> + >>> +static void d2l_write(struct i2c_client *i2c, u16 reg, u32 val) >>> +{ >>> + u8 buf[6]; >>> + int ret; >>> + >>> + buf[0] = reg >> 8; >>> + buf[1] = reg & 0xFF; >>> + buf[2] = (val >> 0) & 0xFF; >>> + buf[3] = (val >> 8) & 0xFF; >>> + buf[4] = (val >> 16) & 0xFF; >>> + buf[5] = (val >> 24) & 0xFF; >>> + >>> + ret = i2c_master_send(i2c, buf, ARRAY_SIZE(buf)); >>> + if (ret < 0) >>> + dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n", >>> + ret, reg); >>> +} >>> + >>> +/* helper function to access bus_formats */ >>> +static struct drm_connector *get_connector(struct drm_encoder *encoder) >>> +{ >>> + struct drm_device *dev = encoder->dev; >>> + struct drm_connector *connector; >>> + >>> + list_for_each_entry(connector, &dev->mode_config.connector_list, head) >>> + if (connector->encoder == encoder) >>> + return connector; >>> + >>> + return NULL; >>> +} >>> + >>> +static void tc_bridge_enable(struct drm_bridge *bridge) >>> +{ >>> + struct tc_data *tc = bridge_to_tc(bridge); >>> + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; >>> + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; >>> + u32 val = 0; >>> + u16 bus_formats; >>> + struct drm_display_mode *mode; >>> + struct drm_connector *connector = get_connector(bridge->encoder); >>> + >>> + mode = &bridge->encoder->crtc->state->adjusted_mode; >>> + >>> + hbpr = mode->htotal - mode->hsync_end; >>> + hpw = mode->hsync_end - mode->hsync_start; >>> + vbpr = mode->vtotal - mode->vsync_end; >>> + vpw = mode->vsync_end - mode->vsync_start; >>> + >>> + htime1 = (hbpr << 16) + hpw; >>> + vtime1 = (vbpr << 16) + vpw; >>> + >>> + hfpr = mode->hsync_start - mode->hdisplay; >>> + hsize = mode->hdisplay; >>> + vfpr = mode->vsync_start - mode->vdisplay; >>> + vsize = mode->vdisplay; >>> + >>> + htime2 = (hfpr << 16) + hsize; >>> + vtime2 = (vfpr << 16) + vsize; >>> + >>> + val = d2l_read(tc->i2c, IDREG); >>> + >>> + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n", >>> + (val >> 8) & 0xFF, val & 0xFF); >>> + >>> + d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM | >>> + SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS); >>> + usleep_range(30000, 40000); >>> + >>> + d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE); >>> + d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD); >>> + d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3); >>> + d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3); >>> + d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3); >>> + d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3); >>> + >>> + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; >>> + d2l_write(tc->i2c, PPI_LANEENABLE, val); >>> + d2l_write(tc->i2c, DSI_LANEENABLE, val); >>> + >>> + d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); >>> + d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); >>> + >>> + val = TC358775_VPCTRL_VSDELAY(21); >>> + >>> + bus_formats = connector->display_info.bus_formats[0]; >>> + dev_dbg(tc->dev, "bus_formats : %04x\n", bus_formats); >>> + >>> + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG || >>> + bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { >>> + /* RGB888 */ >>> + val |= TC358775_VPCTRL_OPXLFMT(1); >>> + d2l_write(tc->i2c, VPCTRL, val); >>> + } else { >>> + /* RGB666 */ >>> + val |= TC358775_VPCTRL_MSF(1); >>> + d2l_write(tc->i2c, VPCTRL, val); >>> + } >>> + >>> + d2l_write(tc->i2c, HTIM1, htime1); >>> + d2l_write(tc->i2c, VTIM1, vtime1); >>> + d2l_write(tc->i2c, HTIM2, htime2); >>> + d2l_write(tc->i2c, VTIM2, vtime2); >>> + >>> + d2l_write(tc->i2c, VFUEN, VFUEN_EN); >>> + d2l_write(tc->i2c, SYSRST, SYS_RST_LCD); >>> + d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6)); >>> + >>> + /* default jeida-24 */ >>> + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { >>> + /* vesa-24 */ >>> + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); >>> + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); >>> + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); >>> + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); >>> + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); >>> + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); >>> + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); >>> + } >>> + >>> + if (bus_formats == MEDIA_BUS_FMT_RGB666_1X7X3_SPWG) { >>> + /* jeida-18 */ >>> + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); >>> + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0)); >>> + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0)); >>> + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); >>> + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2)); >>> + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); >>> + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0)); >>> + } >>> + >>> + d2l_write(tc->i2c, VFUEN, VFUEN_EN); >>> + >>> + val = LVCFG_LVEN_BIT; >>> + if (tc->dual_link) { >>> + val |= TC358775_LVCFG_LVDLINK(1); >>> + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6); >>> + } else { >>> + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3); >>> + } >>> + >>> + d2l_write(tc->i2c, LVCFG, val); >>> +} >>> + >>> +static int tc_mode_valid(struct drm_bridge *bridge, >>> + const struct drm_display_mode *mode) >>> +{ >>> + struct tc_data *tc = bridge_to_tc(bridge); >>> + >>> + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ >>> + if ((mode->clock > 135000 && tc->dual_link) || >>> + (mode->clock > 270000 && tc->dual_link)) >>> + return MODE_CLOCK_HIGH; >>> + >>> + return MODE_OK; >>> +} >>> + >>> +static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) >>> +{ >>> + struct device_node *endpoint; >>> + struct device_node *parent; >>> + struct device_node *remote; >>> + struct property *prop; >>> + int len; >>> + >>> + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, >>> + TC358775_DSI_IN, -1); >>> + if (endpoint) { >>> + /* dsi0_out node */ >>> + parent = of_graph_get_remote_port_parent(endpoint); >>> + of_node_put(endpoint); >>> + if (parent) { >>> + /* dsi0 port 1 */ >>> + endpoint = of_graph_get_endpoint_by_regs(parent, 1, -1); >>> + of_node_put(parent); >>> + prop = of_find_property(endpoint, "data-lanes", >>> + &len); >>> + of_node_put(endpoint); >>> + if (!prop) { >>> + dev_err(tc->dev, >>> + "failed to find data lane\n"); >>> + return -EPROBE_DEFER; >>> + } >>> + } >>> + } >>> + >>> + tc->num_dsi_lanes = len / sizeof(u32); >>> + >>> + if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4) >>> + return -EINVAL; >>> + >>> + tc->host_node = of_graph_get_remote_node(np, 0, 0); >>> + if (!tc->host_node) >>> + return -ENODEV; >>> + >>> + of_node_put(tc->host_node); >>> + >>> + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, >>> + TC358775_LVDS_OUT1, -1); >>> + if (endpoint) { >>> + remote = of_graph_get_remote_port_parent(endpoint); >>> + of_node_put(endpoint); >>> + >>> + if (remote) { >>> + if (of_device_is_available(remote)) >>> + tc->dual_link = true; >>> + of_node_put(remote); >>> + } >>> + } >>> + >>> + dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes); >>> + dev_dbg(tc->dev, "operating in %s-link mode\n", >>> + tc->dual_link ? "dual" : "single"); >>> + >>> + return 0; >>> +} >>> + >>> +static int tc_bridge_attach(struct drm_bridge *bridge, >>> + enum drm_bridge_attach_flags flags) >>> +{ >>> + struct tc_data *tc = bridge_to_tc(bridge); >>> + struct device *dev = &tc->i2c->dev; >>> + struct mipi_dsi_host *host; >>> + struct mipi_dsi_device *dsi; >>> + int ret; >>> + >>> + const struct mipi_dsi_device_info info = { .type = "tc358775", >>> + .channel = 0, >>> + .node = NULL, >>> + }; >>> + >>> + host = of_find_mipi_dsi_host_by_node(tc->host_node); >>> + if (!host) { >>> + dev_err(dev, "failed to find dsi host\n"); >>> + return -EPROBE_DEFER; >>> + } >>> + >>> + dsi = mipi_dsi_device_register_full(host, &info); >>> + if (IS_ERR(dsi)) { >>> + dev_err(dev, "failed to create dsi device\n"); >>> + ret = PTR_ERR(dsi); >>> + goto err_dsi_device; >>> + } >>> + >>> + tc->dsi = dsi; >>> + >>> + dsi->lanes = tc->num_dsi_lanes; >>> + dsi->format = MIPI_DSI_FMT_RGB888; >>> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; >>> + >>> + ret = mipi_dsi_attach(dsi); >>> + if (ret < 0) { >>> + dev_err(dev, "failed to attach dsi to host\n"); >>> + goto err_dsi_attach; >>> + } >>> + >>> + /* Attach the panel-bridge to the dsi bridge */ >>> + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, >>> + &tc->bridge, flags); >>> +err_dsi_attach: >>> + mipi_dsi_device_unregister(dsi); >>> +err_dsi_device: >>> + return ret; >>> +} >>> + >>> +static const struct drm_bridge_funcs tc_bridge_funcs = { >>> + .attach = tc_bridge_attach, >>> + .pre_enable = tc_bridge_pre_enable, >>> + .enable = tc_bridge_enable, >>> + .mode_valid = tc_mode_valid, >>> + .post_disable = tc_bridge_post_disable, >>> +}; >>> + >>> +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) >>> +{ >>> + struct device *dev = &client->dev; >>> + struct drm_panel *panel; >>> + struct tc_data *tc; >>> + int ret; >>> + >>> + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); >>> + if (!tc) >>> + return -ENOMEM; >>> + >>> + tc->dev = dev; >>> + tc->i2c = client; >>> + >>> + ret = drm_of_find_panel_or_bridge(dev->of_node, TC358775_LVDS_OUT0, >>> + 0, &panel, NULL); >>> + if (ret < 0) >>> + return ret; >>> + if (!panel) >>> + return -ENODEV; >>> + >>> + tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel); >>> + if (IS_ERR(tc->panel_bridge)) >>> + return PTR_ERR(tc->panel_bridge); >>> + >>> + ret = tc358775_parse_dt(dev->of_node, tc); >>> + if (ret) >>> + return ret; >>> + >>> + tc->vddio = devm_regulator_get(dev, "vddio-supply"); >>> + if (IS_ERR(tc->vddio)) { >>> + ret = PTR_ERR(tc->vddio); >>> + dev_err(dev, "vddio-supply not found\n"); >>> + return ret; >>> + } >>> + >>> + tc->vdd = devm_regulator_get(dev, "vdd-supply"); >>> + if (IS_ERR(tc->vdd)) { >>> + ret = PTR_ERR(tc->vddio); >>> + dev_err(dev, "vdd-supply not found\n"); >>> + return ret; >>> + } >>> + >>> + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); >>> + if (IS_ERR(tc->stby_gpio)) { >>> + ret = PTR_ERR(tc->stby_gpio); >>> + dev_err(dev, "cannot get stby-gpio %d\n", ret); >>> + return ret; >>> + } >>> + >>> + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); >>> + if (IS_ERR(tc->reset_gpio)) { >>> + ret = PTR_ERR(tc->reset_gpio); >>> + dev_err(dev, "cannot get reset-gpios %d\n", ret); >>> + return ret; >>> + } >>> + >>> + tc->bridge.funcs = &tc_bridge_funcs; >>> + tc->bridge.of_node = dev->of_node; >>> + drm_bridge_add(&tc->bridge); >>> + >>> + i2c_set_clientdata(client, tc); >>> + >>> + return 0; >>> +} >>> + >>> +static int tc_remove(struct i2c_client *client) >>> +{ >>> + struct tc_data *tc = i2c_get_clientdata(client); >>> + >>> + drm_bridge_remove(&tc->bridge); >>> + >>> + return 0; >>> +} >>> + >>> +static const struct i2c_device_id tc358775_i2c_ids[] = { >>> + { "tc358775", 0 }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); >>> + >>> +static const struct of_device_id tc358775_of_ids[] = { >>> + { .compatible = "toshiba,tc358775", }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(of, tc358775_of_ids); >>> + >>> +static struct i2c_driver tc358775_driver = { >>> + .driver = { >>> + .name = "tc358775", >>> + .of_match_table = tc358775_of_ids, >>> + }, >>> + .id_table = tc358775_i2c_ids, >>> + .probe = tc_probe, >>> + .remove = tc_remove, >>> +}; >>> +module_i2c_driver(tc358775_driver); >>> + >>> +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); >>> +MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver"); >>> +MODULE_LICENSE("GPL v2"); >>> >> > > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 43271c21d3fc..084e9853944a 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -181,6 +181,16 @@ config DRM_TOSHIBA_TC358768 help Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. +config DRM_TOSHIBA_TC358775 + tristate "Toshiba TC358775 LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + ---help--- + Toshiba TC358775 LVDS bridge chip driver. + config DRM_TI_TFP410 tristate "TI TFP410 DVI/HDMI bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index d63d4b7e4347..23c770b3bfe4 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c new file mode 100644 index 000000000000..8c9bd4e77bfd --- /dev/null +++ b/drivers/gpu/drm/bridge/tc358775.c @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * tc358775 DSI to LVDS bridge driver + * + * Copyright (C) 2020 SMART Wireless Computing + * Author: Vinay Simha BN <simhavcs@gmail.com> + * + */ +//#define DEBUG +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_probe_helper.h> + +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) + +/* Registers */ + +/* DSI D-PHY Layer Registers */ +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ + +/* DSI PPI Layer Registers */ +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ +#define PPI_START_FUNCTION 1 + +#define PPI_BUSYPPI 0x0108 +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ +#define PPI_LPTXTIMECNT 0x0114 +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ + +/* Analog timer function enable */ +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ + +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ + +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ + +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ +#define DSI_RX_START 1 + +#define DSI_BUSYDSI 0x0208 +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ + +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ + +#define DSIERRCNT 0x0300 /* DSI Error Count */ +#define APLCTRL 0x0400 /* Application Layer Control */ +#define RDPKTLN 0x0404 /* Command Read Packet Length */ + +#define VPCTRL 0x0450 /* Video Path Control */ +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ +#define VTIM1 0x045C /* Vertical Timing Control 1 */ +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ +#define VFUEN_EN BIT(0) /* Upload Enable */ + +/* Mux Input Select for LVDS LINK Input */ +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ +#define LV_MX1215 0x048C /* Bit 12 to 15 */ +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) + +/* Input bit numbers used in mux registers */ +enum { + LVI_R0, + LVI_R1, + LVI_R2, + LVI_R3, + LVI_R4, + LVI_R5, + LVI_R6, + LVI_R7, + LVI_G0, + LVI_G1, + LVI_G2, + LVI_G3, + LVI_G4, + LVI_G5, + LVI_G6, + LVI_G7, + LVI_B0, + LVI_B1, + LVI_B2, + LVI_B3, + LVI_B4, + LVI_B5, + LVI_B6, + LVI_B7, + LVI_HS, + LVI_VS, + LVI_DE, + LVI_L0 +}; + +#define LVCFG 0x049C /* LVDS Configuration */ +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ +#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ +#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) +#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */ +#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */ + +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ +#define SYSSTAT 0x0500 /* System Status */ +#define SYSRST 0x0504 /* System Reset */ + +#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ +#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ +#define SYS_RST_LCD BIT(2) /* Reset LCD controller */ +#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ +#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ +#define SYS_RST_REG BIT(5) /* Reset Register module */ + +/* GPIO Registers */ +#define GPIOC 0x0520 /* GPIO Control */ +#define GPIOO 0x0524 /* GPIO Output */ +#define GPIOI 0x0528 /* GPIO Input */ + +/* I2C Registers */ +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ +#define I2CMADDR 0x0544 /* I2C Master Addressing */ +#define WDATAQ 0x0548 /* Write Data Queue */ +#define RDATAQ 0x054C /* Read Data Queue */ + +/* Chip ID and Revision ID Register */ +#define IDREG 0x0580 + +#define LPX_PERIOD 4 +#define TTA_GET 0x40000 +#define TTA_SURE 6 + +#define TC358775XBG_ID 0x00007500 + +/* Debug Registers */ +#define DEBUG00 0x05A0 /* Debug */ +#define DEBUG01 0x05A4 /* LVDS Data */ + +#define DSI_CLEN_BIT BIT(0) +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ +#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */ +#define LVCFG_LVEN_BIT BIT(0) + +#define L0EN BIT(1) + +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & + TC358775_VPCTRL_VSDELAY__MASK; +} + +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & + TC358775_VPCTRL_OPXLFMT__MASK; +} + +#define TC358775_VPCTRL_MSF__MASK 0x00000001 +#define TC358775_VPCTRL_MSF__SHIFT 0 +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & + TC358775_VPCTRL_MSF__MASK; +} + +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) +{ + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & + TC358775_LVCFG_PCLKDIV__MASK; +} + +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 +#define TC358775_LVCFG_LVDLINK__SHIFT 0 +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) +{ + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & + TC358775_LVCFG_LVDLINK__MASK; +} + +enum tc358775_ports { + TC358775_DSI_IN, + TC358775_LVDS_OUT0, + TC358775_LVDS_OUT1, +}; + +struct tc_data { + struct i2c_client *i2c; + struct device *dev; + + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + + struct device_node *host_node; + struct mipi_dsi_device *dsi; + u8 num_dsi_lanes; + + struct regulator *vdd; + struct regulator *vddio; + struct gpio_desc *reset_gpio; + struct gpio_desc *stby_gpio; + bool dual_link; /* single-link or dual-link */ +}; + +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) +{ + return container_of(b, struct tc_data, bridge); +} + +static void tc_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_enable(tc->vddio); + if (ret < 0) + dev_err(dev, "regulator vddio enable failed, %d\n", ret); + usleep_range(10000, 11000); + + ret = regulator_enable(tc->vdd); + if (ret < 0) + dev_err(dev, "regulator vdd enable failed, %d\n", ret); + usleep_range(10000, 11000); + + gpiod_set_value(tc->stby_gpio, 0); + usleep_range(10000, 11000); + + gpiod_set_value(tc->reset_gpio, 0); + usleep_range(10, 20); +} + +static void tc_bridge_post_disable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_disable(tc->vddio); + if (ret < 0) + dev_err(dev, "regulator vddio disable failed, %d\n", ret); + usleep_range(10000, 11000); + + ret = regulator_disable(tc->vdd); + if (ret < 0) + dev_err(dev, "regulator vdd disable failed, %d\n", ret); + usleep_range(10000, 11000); + + gpiod_set_value(tc->stby_gpio, 1); + usleep_range(10000, 11000); + + gpiod_set_value(tc->reset_gpio, 1); + usleep_range(10, 20); +} + +static u32 d2l_read(struct i2c_client *i2c, u16 reg) +{ + int ret; + u8 val[4]; + u8 addr[] = {(reg >> 8) & 0xff, reg & 0xff}; + u32 value; + + ret = i2c_master_send(i2c, addr, sizeof(reg)); + if (ret < 0) + goto fail; + + ret = i2c_master_recv(i2c, val, sizeof(value)); + if (ret < 0) + goto fail; + + value = val[3] << 24 | val[2] << 16 | val[1] << 8 | val[0]; + + pr_debug("d2l: I2C : reg:%04x value:%08x\n", reg, value); + + return value; + +fail: + dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n", + ret, reg); + return 0; +} + +static void d2l_write(struct i2c_client *i2c, u16 reg, u32 val) +{ + u8 buf[6]; + int ret; + + buf[0] = reg >> 8; + buf[1] = reg & 0xFF; + buf[2] = (val >> 0) & 0xFF; + buf[3] = (val >> 8) & 0xFF; + buf[4] = (val >> 16) & 0xFF; + buf[5] = (val >> 24) & 0xFF; + + ret = i2c_master_send(i2c, buf, ARRAY_SIZE(buf)); + if (ret < 0) + dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n", + ret, reg); +} + +/* helper function to access bus_formats */ +static struct drm_connector *get_connector(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + return connector; + + return NULL; +} + +static void tc_bridge_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; + u32 val = 0; + u16 bus_formats; + struct drm_display_mode *mode; + struct drm_connector *connector = get_connector(bridge->encoder); + + mode = &bridge->encoder->crtc->state->adjusted_mode; + + hbpr = mode->htotal - mode->hsync_end; + hpw = mode->hsync_end - mode->hsync_start; + vbpr = mode->vtotal - mode->vsync_end; + vpw = mode->vsync_end - mode->vsync_start; + + htime1 = (hbpr << 16) + hpw; + vtime1 = (vbpr << 16) + vpw; + + hfpr = mode->hsync_start - mode->hdisplay; + hsize = mode->hdisplay; + vfpr = mode->vsync_start - mode->vdisplay; + vsize = mode->vdisplay; + + htime2 = (hfpr << 16) + hsize; + vtime2 = (vfpr << 16) + vsize; + + val = d2l_read(tc->i2c, IDREG); + + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n", + (val >> 8) & 0xFF, val & 0xFF); + + d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM | + SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS); + usleep_range(30000, 40000); + + d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE); + d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD); + d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3); + d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3); + d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3); + d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3); + + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; + d2l_write(tc->i2c, PPI_LANEENABLE, val); + d2l_write(tc->i2c, DSI_LANEENABLE, val); + + d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); + d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); + + val = TC358775_VPCTRL_VSDELAY(21); + + bus_formats = connector->display_info.bus_formats[0]; + dev_dbg(tc->dev, "bus_formats : %04x\n", bus_formats); + + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG || + bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { + /* RGB888 */ + val |= TC358775_VPCTRL_OPXLFMT(1); + d2l_write(tc->i2c, VPCTRL, val); + } else { + /* RGB666 */ + val |= TC358775_VPCTRL_MSF(1); + d2l_write(tc->i2c, VPCTRL, val); + } + + d2l_write(tc->i2c, HTIM1, htime1); + d2l_write(tc->i2c, VTIM1, vtime1); + d2l_write(tc->i2c, HTIM2, htime2); + d2l_write(tc->i2c, VTIM2, vtime2); + + d2l_write(tc->i2c, VFUEN, VFUEN_EN); + d2l_write(tc->i2c, SYSRST, SYS_RST_LCD); + d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6)); + + /* default jeida-24 */ + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { + /* vesa-24 */ + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); + } + + if (bus_formats == MEDIA_BUS_FMT_RGB666_1X7X3_SPWG) { + /* jeida-18 */ + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0)); + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0)); + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2)); + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0)); + } + + d2l_write(tc->i2c, VFUEN, VFUEN_EN); + + val = LVCFG_LVEN_BIT; + if (tc->dual_link) { + val |= TC358775_LVCFG_LVDLINK(1); + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6); + } else { + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3); + } + + d2l_write(tc->i2c, LVCFG, val); +} + +static int tc_mode_valid(struct drm_bridge *bridge, + const struct drm_display_mode *mode) +{ + struct tc_data *tc = bridge_to_tc(bridge); + + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ + if ((mode->clock > 135000 && tc->dual_link) || + (mode->clock > 270000 && tc->dual_link)) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) +{ + struct device_node *endpoint; + struct device_node *parent; + struct device_node *remote; + struct property *prop; + int len; + + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, + TC358775_DSI_IN, -1); + if (endpoint) { + /* dsi0_out node */ + parent = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + if (parent) { + /* dsi0 port 1 */ + endpoint = of_graph_get_endpoint_by_regs(parent, 1, -1); + of_node_put(parent); + prop = of_find_property(endpoint, "data-lanes", + &len); + of_node_put(endpoint); + if (!prop) { + dev_err(tc->dev, + "failed to find data lane\n"); + return -EPROBE_DEFER; + } + } + } + + tc->num_dsi_lanes = len / sizeof(u32); + + if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4) + return -EINVAL; + + tc->host_node = of_graph_get_remote_node(np, 0, 0); + if (!tc->host_node) + return -ENODEV; + + of_node_put(tc->host_node); + + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, + TC358775_LVDS_OUT1, -1); + if (endpoint) { + remote = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + + if (remote) { + if (of_device_is_available(remote)) + tc->dual_link = true; + of_node_put(remote); + } + } + + dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes); + dev_dbg(tc->dev, "operating in %s-link mode\n", + tc->dual_link ? "dual" : "single"); + + return 0; +} + +static int tc_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->i2c->dev; + struct mipi_dsi_host *host; + struct mipi_dsi_device *dsi; + int ret; + + const struct mipi_dsi_device_info info = { .type = "tc358775", + .channel = 0, + .node = NULL, + }; + + host = of_find_mipi_dsi_host_by_node(tc->host_node); + if (!host) { + dev_err(dev, "failed to find dsi host\n"); + return -EPROBE_DEFER; + } + + dsi = mipi_dsi_device_register_full(host, &info); + if (IS_ERR(dsi)) { + dev_err(dev, "failed to create dsi device\n"); + ret = PTR_ERR(dsi); + goto err_dsi_device; + } + + tc->dsi = dsi; + + dsi->lanes = tc->num_dsi_lanes; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "failed to attach dsi to host\n"); + goto err_dsi_attach; + } + + /* Attach the panel-bridge to the dsi bridge */ + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, + &tc->bridge, flags); +err_dsi_attach: + mipi_dsi_device_unregister(dsi); +err_dsi_device: + return ret; +} + +static const struct drm_bridge_funcs tc_bridge_funcs = { + .attach = tc_bridge_attach, + .pre_enable = tc_bridge_pre_enable, + .enable = tc_bridge_enable, + .mode_valid = tc_mode_valid, + .post_disable = tc_bridge_post_disable, +}; + +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct drm_panel *panel; + struct tc_data *tc; + int ret; + + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); + if (!tc) + return -ENOMEM; + + tc->dev = dev; + tc->i2c = client; + + ret = drm_of_find_panel_or_bridge(dev->of_node, TC358775_LVDS_OUT0, + 0, &panel, NULL); + if (ret < 0) + return ret; + if (!panel) + return -ENODEV; + + tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(tc->panel_bridge)) + return PTR_ERR(tc->panel_bridge); + + ret = tc358775_parse_dt(dev->of_node, tc); + if (ret) + return ret; + + tc->vddio = devm_regulator_get(dev, "vddio-supply"); + if (IS_ERR(tc->vddio)) { + ret = PTR_ERR(tc->vddio); + dev_err(dev, "vddio-supply not found\n"); + return ret; + } + + tc->vdd = devm_regulator_get(dev, "vdd-supply"); + if (IS_ERR(tc->vdd)) { + ret = PTR_ERR(tc->vddio); + dev_err(dev, "vdd-supply not found\n"); + return ret; + } + + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); + if (IS_ERR(tc->stby_gpio)) { + ret = PTR_ERR(tc->stby_gpio); + dev_err(dev, "cannot get stby-gpio %d\n", ret); + return ret; + } + + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(tc->reset_gpio)) { + ret = PTR_ERR(tc->reset_gpio); + dev_err(dev, "cannot get reset-gpios %d\n", ret); + return ret; + } + + tc->bridge.funcs = &tc_bridge_funcs; + tc->bridge.of_node = dev->of_node; + drm_bridge_add(&tc->bridge); + + i2c_set_clientdata(client, tc); + + return 0; +} + +static int tc_remove(struct i2c_client *client) +{ + struct tc_data *tc = i2c_get_clientdata(client); + + drm_bridge_remove(&tc->bridge); + + return 0; +} + +static const struct i2c_device_id tc358775_i2c_ids[] = { + { "tc358775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); + +static const struct of_device_id tc358775_of_ids[] = { + { .compatible = "toshiba,tc358775", }, + { } +}; +MODULE_DEVICE_TABLE(of, tc358775_of_ids); + +static struct i2c_driver tc358775_driver = { + .driver = { + .name = "tc358775", + .of_match_table = tc358775_of_ids, + }, + .id_table = tc358775_i2c_ids, + .probe = tc_probe, + .remove = tc_remove, +}; +module_i2c_driver(tc358775_driver); + +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); +MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver"); +MODULE_LICENSE("GPL v2");
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> --- v1: Initial version v2: * Andrzej Hajda review comments incorporated SPDX identifier development debug removed alphabetic order headers u32 instead of unit32_t magic numbers to macros for CLRSI and mux registers ignored return value * Laurent Pinchart review comments incorporated mdelay to usleep_range bus_formats added v3: * Andrzej Hajda review comments incorporated drm_connector_status removed u32 rev removed and local variabl is used regulator enable disable with proper orders and delays as per the spec devm_drm_panel_bridge_add method used instead of panel description modified dual port implemented v4: * Sam Ravnborg review comments incorporated panel->connector_type removed * Reported-by: kernel test robot <lkp@intel.com> parse_dt to static function removed the if (endpoint), since data-lanes has to be present for dsi dts ports --- drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/tc358775.c | 721 ++++++++++++++++++++++++++++++ 3 files changed, 732 insertions(+) create mode 100644 drivers/gpu/drm/bridge/tc358775.c -- 2.17.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel