@@ -680,6 +680,13 @@ static int usb_audio_probe(struct usb_interface *intf,
goto __error;
}
+ if (chip->need_delayed_register) {
+ dev_info(&dev->dev,
+ "Found post-registration device assignment: %08x:%02x\n",
+ chip->usb_id, ifnum);
+ chip->need_delayed_register = false; /* clear again */
+ }
+
/* we are allowed to call snd_card_register() many times, but first
* check to see if a device needs to skip it or do anything special
*/
@@ -502,6 +502,9 @@ static int __snd_usb_add_audio_stream(struct snd_usb_audio *chip,
subs = &as->substream[stream];
if (subs->ep_num)
continue;
+ if (snd_device_get_state(chip->card, as->pcm) !=
+ SNDRV_DEV_BUILD)
+ chip->need_delayed_register = true;
err = snd_pcm_new_stream(as->pcm, stream, 1);
if (err < 0)
return err;
@@ -34,6 +34,7 @@ struct snd_usb_audio {
unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
unsigned int tx_length_quirk:1; /* Put length specifier in transfers */
unsigned int setup_fmt_after_resume_quirk:1; /* setup the format to interface after resume */
+ unsigned int need_delayed_register:1; /* warn for delayed registration */
int num_interfaces;
int num_suspended_intf;
int sample_rate_read_error;
The USB-audio driver may call snd_card_register() multiple times as its probe function is per USB interface while some USB-audio devices may provide multiple interfaces to assign different streams although they belong to the same device. This works in most cases but the registration is racy, hence it may miss the device recognition, e.g. PA doesn't see certain devices when hotplugged. The recent addition of the delayed registration quirk allows to sync the registration at the last known interface, and the previous commit added a new module option to allow the dynamic setup for that purpose. Now, this patch tries to find out and notifies for such devices that require the delayed registration. It shows a message like: Found post-registration device assignment: 1234abcd:02 If you hit this message, you can pass delayed_register module option like: snd_usb_audio.delayed_register=1234abcd:02 by just copying the last shown entry. If this works, it can be added statically in the quirk list, registration_quirks[] found at the end of sound/usb/quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/usb/card.c | 7 +++++++ sound/usb/stream.c | 3 +++ sound/usb/usbaudio.h | 1 + 3 files changed, 11 insertions(+)