| Message ID | 20200619082013.13661-6-lorenzo.pieralisi@arm.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ACPI/OF: Upgrade MSI/IOMMU ID mapping APIs | expand |
On Fri, Jun 19, 2020 at 09:20:06AM +0100, Lorenzo Pieralisi wrote: > Some HW devices are created as child devices of proprietary busses, > that have a bus specific policy defining how the child devices > wires representing the devices ID are translated into IOMMU and > IRQ controllers device IDs. > > Current IORT code provides translations for: > > - PCI devices, where the device ID is well identified at bus level > as the requester ID (RID) > - Platform devices that are endpoint devices where the device ID is > retrieved from the ACPI object IORT mappings (Named components single > mappings). A platform device is represented in IORT as a named > component node > > For devices that are child devices of proprietary busses the IORT > firmware represents the bus node as a named component node in IORT > and it is up to that named component node to define in/out bus > specific ID translations for the bus child devices that are > allocated and created in a bus specific manner. > > In order to make IORT ID translations available for proprietary > bus child devices, the current ACPI (and IORT) code must be > augmented to provide an additional ID parameter to acpi_dma_configure() > representing the child devices input ID. This ID is bus specific > and it is retrieved in bus specific code. > > By adding an ID parameter to acpi_dma_configure(), the IORT > code can map the child device ID to an IOMMU stream ID through > the IORT named component representing the bus in/out ID mappings. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Will Deacon <will@kernel.org> > Cc: Hanjun Guo <guohanjun@huawei.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Robin Murphy <robin.murphy@arm.com> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > --- > drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++---------- > drivers/acpi/scan.c | 8 ++++-- > include/acpi/acpi_bus.h | 9 ++++-- > include/linux/acpi.h | 7 +++++ > include/linux/acpi_iort.h | 7 +++-- > 5 files changed, 67 insertions(+), 23 deletions(-) Hi Rafael, just to ask if the ACPI core changes in this patch are OK with you, thank you very much. Lorenzo > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index 421c6976ab81..ec782e4a0fe4 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -978,19 +978,54 @@ static void iort_named_component_init(struct device *dev, > nc->node_flags); > } > > +static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) > +{ > + struct acpi_iort_node *parent; > + int err = -ENODEV, i = 0; > + u32 streamid = 0; > + > + do { > + > + parent = iort_node_map_platform_id(node, &streamid, > + IORT_IOMMU_TYPE, > + i++); > + > + if (parent) > + err = iort_iommu_xlate(dev, parent, streamid); > + } while (parent && !err); > + > + return err; > +} > + > +static int iort_nc_iommu_map_id(struct device *dev, > + struct acpi_iort_node *node, > + const u32 *in_id) > +{ > + struct acpi_iort_node *parent; > + u32 streamid; > + > + parent = iort_node_map_id(node, *in_id, &streamid, IORT_IOMMU_TYPE); > + if (parent) > + return iort_iommu_xlate(dev, parent, streamid); > + > + return -ENODEV; > +} > + > + > /** > - * iort_iommu_configure - Set-up IOMMU configuration for a device. > + * iort_iommu_configure_id - Set-up IOMMU configuration for a device. > * > * @dev: device to configure > + * @id_in: optional input id const value pointer > * > * Returns: iommu_ops pointer on configuration success > * NULL on configuration failure > */ > -const struct iommu_ops *iort_iommu_configure(struct device *dev) > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > + const u32 *id_in) > { > - struct acpi_iort_node *node, *parent; > + struct acpi_iort_node *node; > const struct iommu_ops *ops; > - u32 streamid = 0; > int err = -ENODEV; > > /* > @@ -1019,21 +1054,13 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > if (fwspec && iort_pci_rc_supports_ats(node)) > fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS; > } else { > - int i = 0; > - > node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, > iort_match_node_callback, dev); > if (!node) > return NULL; > > - do { > - parent = iort_node_map_platform_id(node, &streamid, > - IORT_IOMMU_TYPE, > - i++); > - > - if (parent) > - err = iort_iommu_xlate(dev, parent, streamid); > - } while (parent && !err); > + err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) : > + iort_nc_iommu_map(dev, node); > > if (!err) > iort_named_component_init(dev, node); > @@ -1058,6 +1085,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > > return ops; > } > + > #else > static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) > { return NULL; } > @@ -1066,7 +1094,8 @@ static inline int iort_add_device_replay(const struct iommu_ops *ops, > { return 0; } > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) > { return 0; } > -const struct iommu_ops *iort_iommu_configure(struct device *dev) > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > + const u32 *input_id) > { return NULL; } > #endif > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > index 8777faced51a..2142f1554761 100644 > --- a/drivers/acpi/scan.c > +++ b/drivers/acpi/scan.c > @@ -1457,8 +1457,10 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, > * acpi_dma_configure - Set-up DMA configuration for the device. > * @dev: The pointer to the device > * @attr: device dma attributes > + * @input_id: input device id const value pointer > */ > -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, > + const u32 *input_id) > { > const struct iommu_ops *iommu; > u64 dma_addr = 0, size = 0; > @@ -1470,7 +1472,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > iort_dma_setup(dev, &dma_addr, &size); > > - iommu = iort_iommu_configure(dev); > + iommu = iort_iommu_configure_id(dev, input_id); > if (PTR_ERR(iommu) == -EPROBE_DEFER) > return -EPROBE_DEFER; > > @@ -1479,7 +1481,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > return 0; > } > -EXPORT_SYMBOL_GPL(acpi_dma_configure); > +EXPORT_SYMBOL_GPL(acpi_dma_configure_id); > > static void acpi_init_coherency(struct acpi_device *adev) > { > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > index 5afb6ceb284f..a3abcc4b7d9f 100644 > --- a/include/acpi/acpi_bus.h > +++ b/include/acpi/acpi_bus.h > @@ -588,8 +588,13 @@ bool acpi_dma_supported(struct acpi_device *adev); > enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); > int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, > u64 *size); > -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); > - > +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, > + const u32 *input_id); > +static inline int acpi_dma_configure(struct device *dev, > + enum dev_dma_attr attr) > +{ > + return acpi_dma_configure_id(dev, attr, NULL); > +} > struct acpi_device *acpi_find_child_device(struct acpi_device *parent, > u64 address, bool check_children); > int acpi_is_root_bridge(acpi_handle); > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index d661cd0ee64d..6d2c47489d90 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -905,6 +905,13 @@ static inline int acpi_dma_configure(struct device *dev, > return 0; > } > > +static inline int acpi_dma_configure_id(struct device *dev, > + enum dev_dma_attr attr, > + const u32 *input_id) > +{ > + return 0; > +} > + > #define ACPI_PTR(_ptr) (NULL) > > static inline void acpi_device_set_enumerated(struct acpi_device *adev) > diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h > index e51425e083da..20a32120bb88 100644 > --- a/include/linux/acpi_iort.h > +++ b/include/linux/acpi_iort.h > @@ -35,7 +35,8 @@ void acpi_configure_pmsi_domain(struct device *dev); > int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id); > /* IOMMU interface */ > void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *size); > -const struct iommu_ops *iort_iommu_configure(struct device *dev); > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > + const u32 *id_in); > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head); > #else > static inline void acpi_iort_init(void) { } > @@ -48,8 +49,8 @@ static inline void acpi_configure_pmsi_domain(struct device *dev) { } > /* IOMMU interface */ > static inline void iort_dma_setup(struct device *dev, u64 *dma_addr, > u64 *size) { } > -static inline const struct iommu_ops *iort_iommu_configure( > - struct device *dev) > +static inline const struct iommu_ops *iort_iommu_configure_id( > + struct device *dev, const u32 *id_in) > { return NULL; } > static inline > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) > -- > 2.26.1 >
On Thu, Jul 09, 2020 at 10:35:14AM +0100, Lorenzo Pieralisi wrote: > On Fri, Jun 19, 2020 at 09:20:06AM +0100, Lorenzo Pieralisi wrote: > > Some HW devices are created as child devices of proprietary busses, > > that have a bus specific policy defining how the child devices > > wires representing the devices ID are translated into IOMMU and > > IRQ controllers device IDs. > > > > Current IORT code provides translations for: > > > > - PCI devices, where the device ID is well identified at bus level > > as the requester ID (RID) > > - Platform devices that are endpoint devices where the device ID is > > retrieved from the ACPI object IORT mappings (Named components single > > mappings). A platform device is represented in IORT as a named > > component node > > > > For devices that are child devices of proprietary busses the IORT > > firmware represents the bus node as a named component node in IORT > > and it is up to that named component node to define in/out bus > > specific ID translations for the bus child devices that are > > allocated and created in a bus specific manner. > > > > In order to make IORT ID translations available for proprietary > > bus child devices, the current ACPI (and IORT) code must be > > augmented to provide an additional ID parameter to acpi_dma_configure() > > representing the child devices input ID. This ID is bus specific > > and it is retrieved in bus specific code. > > > > By adding an ID parameter to acpi_dma_configure(), the IORT > > code can map the child device ID to an IOMMU stream ID through > > the IORT named component representing the bus in/out ID mappings. > > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Cc: Will Deacon <will@kernel.org> > > Cc: Hanjun Guo <guohanjun@huawei.com> > > Cc: Sudeep Holla <sudeep.holla@arm.com> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Cc: Robin Murphy <robin.murphy@arm.com> > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > > --- > > drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++---------- > > drivers/acpi/scan.c | 8 ++++-- > > include/acpi/acpi_bus.h | 9 ++++-- > > include/linux/acpi.h | 7 +++++ > > include/linux/acpi_iort.h | 7 +++-- > > 5 files changed, 67 insertions(+), 23 deletions(-) > > Hi Rafael, > > just to ask if the ACPI core changes in this patch are OK with you, > thank you very much. Hi Rafael, are you OK with ACPI core changes in this patch ? Please let me know, thanks. Lorenzo > Lorenzo > > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > > index 421c6976ab81..ec782e4a0fe4 100644 > > --- a/drivers/acpi/arm64/iort.c > > +++ b/drivers/acpi/arm64/iort.c > > @@ -978,19 +978,54 @@ static void iort_named_component_init(struct device *dev, > > nc->node_flags); > > } > > > > +static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) > > +{ > > + struct acpi_iort_node *parent; > > + int err = -ENODEV, i = 0; > > + u32 streamid = 0; > > + > > + do { > > + > > + parent = iort_node_map_platform_id(node, &streamid, > > + IORT_IOMMU_TYPE, > > + i++); > > + > > + if (parent) > > + err = iort_iommu_xlate(dev, parent, streamid); > > + } while (parent && !err); > > + > > + return err; > > +} > > + > > +static int iort_nc_iommu_map_id(struct device *dev, > > + struct acpi_iort_node *node, > > + const u32 *in_id) > > +{ > > + struct acpi_iort_node *parent; > > + u32 streamid; > > + > > + parent = iort_node_map_id(node, *in_id, &streamid, IORT_IOMMU_TYPE); > > + if (parent) > > + return iort_iommu_xlate(dev, parent, streamid); > > + > > + return -ENODEV; > > +} > > + > > + > > /** > > - * iort_iommu_configure - Set-up IOMMU configuration for a device. > > + * iort_iommu_configure_id - Set-up IOMMU configuration for a device. > > * > > * @dev: device to configure > > + * @id_in: optional input id const value pointer > > * > > * Returns: iommu_ops pointer on configuration success > > * NULL on configuration failure > > */ > > -const struct iommu_ops *iort_iommu_configure(struct device *dev) > > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > > + const u32 *id_in) > > { > > - struct acpi_iort_node *node, *parent; > > + struct acpi_iort_node *node; > > const struct iommu_ops *ops; > > - u32 streamid = 0; > > int err = -ENODEV; > > > > /* > > @@ -1019,21 +1054,13 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > > if (fwspec && iort_pci_rc_supports_ats(node)) > > fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS; > > } else { > > - int i = 0; > > - > > node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, > > iort_match_node_callback, dev); > > if (!node) > > return NULL; > > > > - do { > > - parent = iort_node_map_platform_id(node, &streamid, > > - IORT_IOMMU_TYPE, > > - i++); > > - > > - if (parent) > > - err = iort_iommu_xlate(dev, parent, streamid); > > - } while (parent && !err); > > + err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) : > > + iort_nc_iommu_map(dev, node); > > > > if (!err) > > iort_named_component_init(dev, node); > > @@ -1058,6 +1085,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > > > > return ops; > > } > > + > > #else > > static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) > > { return NULL; } > > @@ -1066,7 +1094,8 @@ static inline int iort_add_device_replay(const struct iommu_ops *ops, > > { return 0; } > > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) > > { return 0; } > > -const struct iommu_ops *iort_iommu_configure(struct device *dev) > > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > > + const u32 *input_id) > > { return NULL; } > > #endif > > > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > > index 8777faced51a..2142f1554761 100644 > > --- a/drivers/acpi/scan.c > > +++ b/drivers/acpi/scan.c > > @@ -1457,8 +1457,10 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, > > * acpi_dma_configure - Set-up DMA configuration for the device. > > * @dev: The pointer to the device > > * @attr: device dma attributes > > + * @input_id: input device id const value pointer > > */ > > -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, > > + const u32 *input_id) > > { > > const struct iommu_ops *iommu; > > u64 dma_addr = 0, size = 0; > > @@ -1470,7 +1472,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > > > iort_dma_setup(dev, &dma_addr, &size); > > > > - iommu = iort_iommu_configure(dev); > > + iommu = iort_iommu_configure_id(dev, input_id); > > if (PTR_ERR(iommu) == -EPROBE_DEFER) > > return -EPROBE_DEFER; > > > > @@ -1479,7 +1481,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > > > return 0; > > } > > -EXPORT_SYMBOL_GPL(acpi_dma_configure); > > +EXPORT_SYMBOL_GPL(acpi_dma_configure_id); > > > > static void acpi_init_coherency(struct acpi_device *adev) > > { > > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > > index 5afb6ceb284f..a3abcc4b7d9f 100644 > > --- a/include/acpi/acpi_bus.h > > +++ b/include/acpi/acpi_bus.h > > @@ -588,8 +588,13 @@ bool acpi_dma_supported(struct acpi_device *adev); > > enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); > > int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, > > u64 *size); > > -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); > > - > > +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, > > + const u32 *input_id); > > +static inline int acpi_dma_configure(struct device *dev, > > + enum dev_dma_attr attr) > > +{ > > + return acpi_dma_configure_id(dev, attr, NULL); > > +} > > struct acpi_device *acpi_find_child_device(struct acpi_device *parent, > > u64 address, bool check_children); > > int acpi_is_root_bridge(acpi_handle); > > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > > index d661cd0ee64d..6d2c47489d90 100644 > > --- a/include/linux/acpi.h > > +++ b/include/linux/acpi.h > > @@ -905,6 +905,13 @@ static inline int acpi_dma_configure(struct device *dev, > > return 0; > > } > > > > +static inline int acpi_dma_configure_id(struct device *dev, > > + enum dev_dma_attr attr, > > + const u32 *input_id) > > +{ > > + return 0; > > +} > > + > > #define ACPI_PTR(_ptr) (NULL) > > > > static inline void acpi_device_set_enumerated(struct acpi_device *adev) > > diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h > > index e51425e083da..20a32120bb88 100644 > > --- a/include/linux/acpi_iort.h > > +++ b/include/linux/acpi_iort.h > > @@ -35,7 +35,8 @@ void acpi_configure_pmsi_domain(struct device *dev); > > int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id); > > /* IOMMU interface */ > > void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *size); > > -const struct iommu_ops *iort_iommu_configure(struct device *dev); > > +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, > > + const u32 *id_in); > > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head); > > #else > > static inline void acpi_iort_init(void) { } > > @@ -48,8 +49,8 @@ static inline void acpi_configure_pmsi_domain(struct device *dev) { } > > /* IOMMU interface */ > > static inline void iort_dma_setup(struct device *dev, u64 *dma_addr, > > u64 *size) { } > > -static inline const struct iommu_ops *iort_iommu_configure( > > - struct device *dev) > > +static inline const struct iommu_ops *iort_iommu_configure_id( > > + struct device *dev, const u32 *id_in) > > { return NULL; } > > static inline > > int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) > > -- > > 2.26.1 > >
On Wed, Jul 15, 2020 at 10:13:26AM +0100, Lorenzo Pieralisi wrote: > On Thu, Jul 09, 2020 at 10:35:14AM +0100, Lorenzo Pieralisi wrote: > > On Fri, Jun 19, 2020 at 09:20:06AM +0100, Lorenzo Pieralisi wrote: > > > Some HW devices are created as child devices of proprietary busses, > > > that have a bus specific policy defining how the child devices > > > wires representing the devices ID are translated into IOMMU and > > > IRQ controllers device IDs. > > > > > > Current IORT code provides translations for: > > > > > > - PCI devices, where the device ID is well identified at bus level > > > as the requester ID (RID) > > > - Platform devices that are endpoint devices where the device ID is > > > retrieved from the ACPI object IORT mappings (Named components single > > > mappings). A platform device is represented in IORT as a named > > > component node > > > > > > For devices that are child devices of proprietary busses the IORT > > > firmware represents the bus node as a named component node in IORT > > > and it is up to that named component node to define in/out bus > > > specific ID translations for the bus child devices that are > > > allocated and created in a bus specific manner. > > > > > > In order to make IORT ID translations available for proprietary > > > bus child devices, the current ACPI (and IORT) code must be > > > augmented to provide an additional ID parameter to acpi_dma_configure() > > > representing the child devices input ID. This ID is bus specific > > > and it is retrieved in bus specific code. > > > > > > By adding an ID parameter to acpi_dma_configure(), the IORT > > > code can map the child device ID to an IOMMU stream ID through > > > the IORT named component representing the bus in/out ID mappings. > > > > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > > Cc: Will Deacon <will@kernel.org> > > > Cc: Hanjun Guo <guohanjun@huawei.com> > > > Cc: Sudeep Holla <sudeep.holla@arm.com> > > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > > Cc: Robin Murphy <robin.murphy@arm.com> > > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > > > --- > > > drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++---------- > > > drivers/acpi/scan.c | 8 ++++-- > > > include/acpi/acpi_bus.h | 9 ++++-- > > > include/linux/acpi.h | 7 +++++ > > > include/linux/acpi_iort.h | 7 +++-- > > > 5 files changed, 67 insertions(+), 23 deletions(-) > > > > Hi Rafael, > > > > just to ask if the ACPI core changes in this patch are OK with you, > > thank you very much. > > Hi Rafael, > > are you OK with ACPI core changes in this patch ? > > Please let me know, thanks. Hi Rafael, gentle ping, I think we are missing v5.9, we would need your feedback on this please. Thanks, Lorenzo
On Tue, Jul 28, 2020 at 2:48 PM Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > > On Wed, Jul 15, 2020 at 10:13:26AM +0100, Lorenzo Pieralisi wrote: > > On Thu, Jul 09, 2020 at 10:35:14AM +0100, Lorenzo Pieralisi wrote: > > > On Fri, Jun 19, 2020 at 09:20:06AM +0100, Lorenzo Pieralisi wrote: > > > > Some HW devices are created as child devices of proprietary busses, > > > > that have a bus specific policy defining how the child devices > > > > wires representing the devices ID are translated into IOMMU and > > > > IRQ controllers device IDs. > > > > > > > > Current IORT code provides translations for: > > > > > > > > - PCI devices, where the device ID is well identified at bus level > > > > as the requester ID (RID) > > > > - Platform devices that are endpoint devices where the device ID is > > > > retrieved from the ACPI object IORT mappings (Named components single > > > > mappings). A platform device is represented in IORT as a named > > > > component node > > > > > > > > For devices that are child devices of proprietary busses the IORT > > > > firmware represents the bus node as a named component node in IORT > > > > and it is up to that named component node to define in/out bus > > > > specific ID translations for the bus child devices that are > > > > allocated and created in a bus specific manner. > > > > > > > > In order to make IORT ID translations available for proprietary > > > > bus child devices, the current ACPI (and IORT) code must be > > > > augmented to provide an additional ID parameter to acpi_dma_configure() > > > > representing the child devices input ID. This ID is bus specific > > > > and it is retrieved in bus specific code. > > > > > > > > By adding an ID parameter to acpi_dma_configure(), the IORT > > > > code can map the child device ID to an IOMMU stream ID through > > > > the IORT named component representing the bus in/out ID mappings. > > > > > > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > > > Cc: Will Deacon <will@kernel.org> > > > > Cc: Hanjun Guo <guohanjun@huawei.com> > > > > Cc: Sudeep Holla <sudeep.holla@arm.com> > > > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > > > Cc: Robin Murphy <robin.murphy@arm.com> > > > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > > > > --- > > > > drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++---------- > > > > drivers/acpi/scan.c | 8 ++++-- > > > > include/acpi/acpi_bus.h | 9 ++++-- > > > > include/linux/acpi.h | 7 +++++ > > > > include/linux/acpi_iort.h | 7 +++-- > > > > 5 files changed, 67 insertions(+), 23 deletions(-) > > > > > > Hi Rafael, > > > > > > just to ask if the ACPI core changes in this patch are OK with you, > > > thank you very much. Sorry for the delay, I was offline last week. > > Hi Rafael, > > > > are you OK with ACPI core changes in this patch ? Yes, I am. Please feel free to route it through whatever tree you think would be appropriate. Thanks!
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 421c6976ab81..ec782e4a0fe4 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -978,19 +978,54 @@ static void iort_named_component_init(struct device *dev, nc->node_flags); } +static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node) +{ + struct acpi_iort_node *parent; + int err = -ENODEV, i = 0; + u32 streamid = 0; + + do { + + parent = iort_node_map_platform_id(node, &streamid, + IORT_IOMMU_TYPE, + i++); + + if (parent) + err = iort_iommu_xlate(dev, parent, streamid); + } while (parent && !err); + + return err; +} + +static int iort_nc_iommu_map_id(struct device *dev, + struct acpi_iort_node *node, + const u32 *in_id) +{ + struct acpi_iort_node *parent; + u32 streamid; + + parent = iort_node_map_id(node, *in_id, &streamid, IORT_IOMMU_TYPE); + if (parent) + return iort_iommu_xlate(dev, parent, streamid); + + return -ENODEV; +} + + /** - * iort_iommu_configure - Set-up IOMMU configuration for a device. + * iort_iommu_configure_id - Set-up IOMMU configuration for a device. * * @dev: device to configure + * @id_in: optional input id const value pointer * * Returns: iommu_ops pointer on configuration success * NULL on configuration failure */ -const struct iommu_ops *iort_iommu_configure(struct device *dev) +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, + const u32 *id_in) { - struct acpi_iort_node *node, *parent; + struct acpi_iort_node *node; const struct iommu_ops *ops; - u32 streamid = 0; int err = -ENODEV; /* @@ -1019,21 +1054,13 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) if (fwspec && iort_pci_rc_supports_ats(node)) fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS; } else { - int i = 0; - node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, iort_match_node_callback, dev); if (!node) return NULL; - do { - parent = iort_node_map_platform_id(node, &streamid, - IORT_IOMMU_TYPE, - i++); - - if (parent) - err = iort_iommu_xlate(dev, parent, streamid); - } while (parent && !err); + err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) : + iort_nc_iommu_map(dev, node); if (!err) iort_named_component_init(dev, node); @@ -1058,6 +1085,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) return ops; } + #else static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) { return NULL; } @@ -1066,7 +1094,8 @@ static inline int iort_add_device_replay(const struct iommu_ops *ops, { return 0; } int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) { return 0; } -const struct iommu_ops *iort_iommu_configure(struct device *dev) +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, + const u32 *input_id) { return NULL; } #endif diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8777faced51a..2142f1554761 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1457,8 +1457,10 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, * acpi_dma_configure - Set-up DMA configuration for the device. * @dev: The pointer to the device * @attr: device dma attributes + * @input_id: input device id const value pointer */ -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, + const u32 *input_id) { const struct iommu_ops *iommu; u64 dma_addr = 0, size = 0; @@ -1470,7 +1472,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) iort_dma_setup(dev, &dma_addr, &size); - iommu = iort_iommu_configure(dev); + iommu = iort_iommu_configure_id(dev, input_id); if (PTR_ERR(iommu) == -EPROBE_DEFER) return -EPROBE_DEFER; @@ -1479,7 +1481,7 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) return 0; } -EXPORT_SYMBOL_GPL(acpi_dma_configure); +EXPORT_SYMBOL_GPL(acpi_dma_configure_id); static void acpi_init_coherency(struct acpi_device *adev) { diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 5afb6ceb284f..a3abcc4b7d9f 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -588,8 +588,13 @@ bool acpi_dma_supported(struct acpi_device *adev); enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset, u64 *size); -int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); - +int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr, + const u32 *input_id); +static inline int acpi_dma_configure(struct device *dev, + enum dev_dma_attr attr) +{ + return acpi_dma_configure_id(dev, attr, NULL); +} struct acpi_device *acpi_find_child_device(struct acpi_device *parent, u64 address, bool check_children); int acpi_is_root_bridge(acpi_handle); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index d661cd0ee64d..6d2c47489d90 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -905,6 +905,13 @@ static inline int acpi_dma_configure(struct device *dev, return 0; } +static inline int acpi_dma_configure_id(struct device *dev, + enum dev_dma_attr attr, + const u32 *input_id) +{ + return 0; +} + #define ACPI_PTR(_ptr) (NULL) static inline void acpi_device_set_enumerated(struct acpi_device *adev) diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h index e51425e083da..20a32120bb88 100644 --- a/include/linux/acpi_iort.h +++ b/include/linux/acpi_iort.h @@ -35,7 +35,8 @@ void acpi_configure_pmsi_domain(struct device *dev); int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id); /* IOMMU interface */ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *size); -const struct iommu_ops *iort_iommu_configure(struct device *dev); +const struct iommu_ops *iort_iommu_configure_id(struct device *dev, + const u32 *id_in); int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head); #else static inline void acpi_iort_init(void) { } @@ -48,8 +49,8 @@ static inline void acpi_configure_pmsi_domain(struct device *dev) { } /* IOMMU interface */ static inline void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *size) { } -static inline const struct iommu_ops *iort_iommu_configure( - struct device *dev) +static inline const struct iommu_ops *iort_iommu_configure_id( + struct device *dev, const u32 *id_in) { return NULL; } static inline int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> --- drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++---------- drivers/acpi/scan.c | 8 ++++-- include/acpi/acpi_bus.h | 9 ++++-- include/linux/acpi.h | 7 +++++ include/linux/acpi_iort.h | 7 +++-- 5 files changed, 67 insertions(+), 23 deletions(-)