@@ -18,6 +18,9 @@
/* Registers Address */
#define CM32181_REG_ADDR_CMD 0x00
+#define CM32181_REG_ADDR_WH 0x01
+#define CM32181_REG_ADDR_WL 0x02
+#define CM32181_REG_ADDR_TEST 0x03
#define CM32181_REG_ADDR_ALS 0x04
#define CM32181_REG_ADDR_STATUS 0x06
#define CM32181_REG_ADDR_ID 0x07
@@ -26,9 +29,13 @@
#define CM32181_CONF_REG_NUM 0x01
/* CMD register */
-#define CM32181_CMD_ALS_ENABLE 0x00
-#define CM32181_CMD_ALS_DISABLE 0x01
-#define CM32181_CMD_ALS_INT_EN 0x02
+#define CM32181_CMD_ALS_DISABLE BIT(0)
+#define CM32181_CMD_ALS_INT_EN BIT(1)
+#define CM32181_CMD_ALS_THRES_WINDOW BIT(2)
+
+#define CM32181_CMD_ALS_PERS_SHIFT 4
+#define CM32181_CMD_ALS_PERS_MASK (0x03 << CM32181_CMD_ALS_PERS_SHIFT)
+#define CM32181_CMD_ALS_PERS_DEFAULT (0x01 << CM32181_CMD_ALS_PERS_SHIFT)
#define CM32181_CMD_ALS_IT_SHIFT 6
#define CM32181_CMD_ALS_IT_MASK (0x0F << CM32181_CMD_ALS_IT_SHIFT)
@@ -82,7 +89,7 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181)
return -ENODEV;
/* Default Values */
- cm32181->conf_regs[CM32181_REG_ADDR_CMD] = CM32181_CMD_ALS_ENABLE |
+ cm32181->conf_regs[CM32181_REG_ADDR_CMD] =
CM32181_CMD_ALS_IT_DEFAULT | CM32181_CMD_ALS_SM_DEFAULT;
cm32181->calibscale = CM32181_CALIBSCALE_DEFAULT;
These come from a newer version of cm32181.c, which is floating around the net, with a copyright of: * Copyright (C) 2014 Capella Microsystems Inc. * Author: Kevin Tsai <ktsai@capellamicro.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2, as published * by the Free Software Foundation. Note that this removes the bogus CM32181_CMD_ALS_ENABLE define, there is no enable bit, only a disable bit and enabled is the absence of being disabled. This is a preparation patch for adding support for the older CM3218 model of the light sensor. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/iio/light/cm32181.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)