@@ -2444,6 +2444,7 @@ static int ov5670_probe(struct i2c_client *client)
struct ov5670 *ov5670;
const char *err_msg;
u32 input_clk = 0;
+ bool low_power;
int ret;
device_property_read_u32(&client->dev, "clock-frequency", &input_clk);
@@ -2460,11 +2461,14 @@ static int ov5670_probe(struct i2c_client *client)
/* Initialize subdev */
v4l2_i2c_subdev_init(&ov5670->sd, client, &ov5670_subdev_ops);
- /* Check module identity */
- ret = ov5670_identify_module(ov5670);
- if (ret) {
- err_msg = "ov5670_identify_module() error";
- goto error_print;
+ low_power = acpi_dev_low_power_state_probe(&client->dev);
+ if (!low_power) {
+ /* Check module identity */
+ ret = ov5670_identify_module(ov5670);
+ if (ret) {
+ err_msg = "ov5670_identify_module() error";
+ goto error_print;
+ }
}
mutex_init(&ov5670->mutex);
@@ -2501,10 +2505,10 @@ static int ov5670_probe(struct i2c_client *client)
ov5670->streaming = false;
/*
- * Device is already turned on by i2c-core with ACPI domain PM.
- * Enable runtime PM and turn off the device.
+ * Don't set the device's state to active if it's in a low power state.
*/
- pm_runtime_set_active(&client->dev);
+ if (!low_power)
+ pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
@@ -2546,7 +2550,7 @@ static const struct dev_pm_ops ov5670_pm_ops = {
#ifdef CONFIG_ACPI
static const struct acpi_device_id ov5670_acpi_ids[] = {
- {"INT3479"},
+ { "INT3479" },
{ /* sentinel */ }
};
@@ -2561,6 +2565,7 @@ static struct i2c_driver ov5670_i2c_driver = {
},
.probe_new = ov5670_probe,
.remove = ov5670_remove,
+ .probe_low_power = true,
};
module_i2c_driver(ov5670_i2c_driver);
Tell ACPI device PM code that the driver supports the device being in a low power state when the driver's probe function is entered. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/ov5670.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)