[1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings

Message ID 20200627192833.217531-2-bartosz.dudziak@snejp.pl
State New
Headers show
Series
  • Qualcomm MSM8226 TLMM binding and driver
Related show

Commit Message

Bartosz Dudziak June 27, 2020, 7:28 p.m.
Add device tree binding Documentation details for Qualcomm msm8226
pinctrl driver.

- Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
  Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
  msm8226 content

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

Comments

Bartosz Dudziak July 16, 2020, 9:29 p.m. | #1
On Wed, Jul 15, 2020 at 02:24:13PM -0600, Rob Herring wrote:
> On Sat, Jun 27, 2020 at 09:28:30PM +0200, Bartosz Dudziak wrote:

> > Add device tree binding Documentation details for Qualcomm msm8226

> > pinctrl driver.

> > 

> > - Bindings documentation was based on qcom,sm8250-pinctrl.yaml by

> >   Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for

> >   msm8226 content

> > 

> > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>

> > ---

> >  .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++++++++++++++++

> >  1 file changed, 123 insertions(+)

> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

> > 

> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

> > new file mode 100644

> > index 0000000000..8d8dc15718

> > --- /dev/null

> > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

> > @@ -0,0 +1,123 @@

> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> > +%YAML 1.2

> > +---

> > +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#

> > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > +

> > +title: Qualcomm Technologies, Inc. MSM8226 TLMM block

> > +

> > +maintainers:

> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>

> > +

> > +description: |

> > +  This binding describes the Top Level Mode Multiplexer block found in the

> > +  MSM8226 platform.

> > +

> > +properties:

> > +  compatible:

> > +    const: qcom,msm8226-pinctrl

> > +

> > +  reg:

> > +    description: Specifies the base address and size of the TLMM register space

> > +    maxItems: 1

> > +

> > +  interrupts:

> > +    description: Specifies the TLMM summary IRQ

> > +    maxItems: 1

> > +

> > +  interrupt-controller: true

> > +

> > +  '#interrupt-cells':

> > +    description: Specifies the PIN numbers and Flags, as defined in

> > +      include/dt-bindings/interrupt-controller/irq.h

> > +    const: 2

> > +

> > +  gpio-controller: true

> > +

> > +  '#gpio-cells':

> > +    description: Specifying the pin number and flags, as defined in

> > +      include/dt-bindings/gpio/gpio.h

> > +    const: 2

> > +

> > +  gpio-ranges:

> > +    maxItems: 1

> > +

> > +  gpio-reserved-ranges:

> > +    maxItems: 1

> > +

> > +#PIN CONFIGURATION NODES

> > +patternProperties:

> > +  '^.*$':

> > +    if:

> > +      type: object

> 

> For new bindings, do '-pins$' for the node name pattern so we don't have 

> to do this hack.

> 


I have changed the name pattern and sent a v2 patch.

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..8d8dc15718
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8226 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+              - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins. Functions are only valid for gpio pins.
+
+          enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+            blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+            blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+            blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        msmgpio: pinctrl@fd510000 {
+                compatible = "qcom,msm8226-pinctrl";
+                reg = <0xfd510000 0x4000>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&msmgpio 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        };