diff mbox series

[05/10] Bluetooth: btusb: Enable Intel events even if already in operational mode

Message ID 20200403194407.784943-6-marcel@holtmann.org
State New
Headers show
Series [01/10] Bluetooth: add support to notify using SCO air mode | expand

Commit Message

Marcel Holtmann April 3, 2020, 7:44 p.m. UTC
In case the controller is already in operation mode, the Intel specific
events will not be enabled. Fix this by jumping to a common finish
section that will allow setting final details for the controller.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 110e96b245e5..43925bdeaa81 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2334,7 +2334,7 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver.fw_variant == 0x23) {
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
 		btintel_check_bdaddr(hdev);
-		return 0;
+		goto finish;
 	}
 
 	/* If the device is not in bootloader mode, then the only possible
@@ -2534,6 +2534,14 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	btintel_load_ddc_config(hdev, fwname);
 
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version(hdev, &ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &ver);
+
+finish:
 	/* Set the event mask for Intel specific vendor events. This enables
 	 * a few extra events that are useful during general operation. It
 	 * does not enable any debugging related events.
@@ -2543,13 +2551,6 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	btintel_set_event_mask(hdev, false);
 
-	/* Read the Intel version information after loading the FW  */
-	err = btintel_read_version(hdev, &ver);
-	if (err)
-		return err;
-
-	btintel_version_info(hdev, &ver);
-
 	return 0;
 }