@@ -144,6 +144,13 @@ patternProperties:
description:
CPSW MDIO bus.
+ "^cpts$":
+ type: object
+ allOf:
+ - $ref: "ti,am654-cpts.yaml#"
+ description:
+ CPSW Common Platform Time Sync (CPTS) module.
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,am654-cpts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
+
+maintainers:
+ - Grygorii Strashko <grygorii.strashko@ti.com>
+ - Sekhar Nori <nsekhar@ti.com>
+
+description: |+
+ The TI AM654x/J721E CPTS module is used to facilitate host control of time
+ sync operations.
+ Main features of CPTS module are
+ - selection of multiple external clock sources
+ - Software control of time sync events via interrupt or polling
+ - 64-bit timestamp mode in ns with PPM and nudge adjustment.
+ - hardware timestamp push inputs (HWx_TS_PUSH)
+ - timestamp counter compare output (TS_COMP)
+ - timestamp counter bit output (TS_SYNC)
+ - periodic Generator function outputs (TS_GENFx)
+ - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
+ - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
+
+ Depending on integration it enables compliance with the IEEE 1588-2008
+ standard for a precision clock synchronization protocol, Ethernet Enhanced
+ Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
+ Measurement (PTM).
+
+ TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
+ different parts of the system which could be synchronized with each other
+ - Main CPTS
+ - MCU CPSW CPTS with IEEE 1588-2008 support
+ - PCIe subsystem CPTS for PTM support
+
+ Depending on CPTS module integration and when CPTS is integral part of
+ another module (MCU CPSW for example) "compatible" and "reg" can
+ be omitted - parent module is fully responsible for CPTS enabling and
+ configuration.
+
+properties:
+ $nodename:
+ pattern: "^cpts(@.*|-[0-9a-f])*$"
+
+ compatible:
+ oneOf:
+ - const: ti,am65-cpts
+ - const: ti,j721e-cpts
+
+ reg:
+ maxItems: 1
+ description:
+ The physical base address and size of CPTS IO range
+
+ reg-names:
+ items:
+ - const: cpts
+
+ clocks:
+ description: CPTS reference clock
+
+ clock-names:
+ items:
+ - const: cpts
+
+ interrupts-extended:
+ items:
+ - description: CPTS events interrupt
+
+ interrupt-names:
+ items:
+ - const: "cpts"
+
+ ti,cpts-ext-ts-inputs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 8
+ description:
+ Number of hardware timestamp push inputs (HWx_TS_PUSH)
+
+ ti,cpts-periodic-outputs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 8
+ description:
+ Number of timestamp Generator function outputs (TS_GENFx)
+
+ refclk-mux:
+ type: object
+ description: CPTS reference clock multiplexer clock
+ properties:
+ '#clock-cells':
+ const: 0
+
+ clocks:
+ maxItems: 8
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clocks-parents:
+ maxItems: 1
+
+ required:
+ - clocks
+
+required:
+ - clocks
+ - clock-names
+ - interrupts-extended
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cpts@310d0000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x310d0000 0x0 0x400>;
+ reg-names = "cpts";
+ clocks = <&main_cpts_mux>;
+ clock-names = "cpts";
+ interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-periodic-outputs = <6>;
+ ti,cpts-ext-ts-inputs = <8>;
+
+ main_cpts_mux: refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+ <&k3_clks 157 91>, <&k3_clks 157 77>,
+ <&k3_clks 157 102>, <&k3_clks 157 80>,
+ <&k3_clks 120 3>, <&k3_clks 121 3>;
+ assigned-clocks = <&main_cpts_mux>;
+ assigned-clock-parents = <&k3_clks 118 11>;
+ };
+ };
+ - |
+
+ cpts {
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
Document device tree bindings for TI AM654/J721E SoC The Common Platform Time Sync (CPTS) module. The CPTS module is used to facilitate host control of time sync operations. Main features of CPTS module are: - selection of multiple external clock sources - 64-bit timestamp mode in ns with ppm and nudge adjustment. - control of time sync events via interrupt or polling - hardware timestamp of ext. events (HWx_TS_PUSH) - periodic generator function outputs (TS_GENFx) - PPS in combination with timesync router - Depending on integration it enables compliance with the IEEE 1588-2008 standard for a precision clock synchronization protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time Measurement (PTM). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 7 + .../bindings/net/ti,k3-am654-cpts.yaml | 152 ++++++++++++++++++ 2 files changed, 159 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml