diff mbox series

[v2,09/10] devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie

Message ID 20200402121148.1767-10-ansuelsmth@gmail.com
State New
Headers show
Series None | expand

Commit Message

Christian Marangi April 2, 2020, 12:11 p.m. UTC
Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset.
In ipq8064 phy_tx0_term_offset is 7, in rev 2, ipq8065 and other SoC it's
set to 0 by default.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 6efcef040741..b699f126ea29 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -5,6 +5,7 @@ 
 	Value type: <stringlist>
 	Definition: Value should contain
 			- "qcom,pcie-ipq8064" for ipq8064
+			- "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
 			- "qcom,pcie-apq8064" for apq8064
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
@@ -295,6 +296,47 @@ 
 		pinctrl-names = "default";
 	};
 
+* Example for ipq8064 rev 2 or ipq8065
+	pcie@1b500000 {
+		compatible = "qcom,pcie-ipq8064-v2", "snps,dw-pcie";
+		reg = <0x1b500000 0x1000
+		       0x1b502000 0x80
+		       0x1b600000 0x100
+		       0x0ff00000 0x100000>;
+		reg-names = "dbi", "elbi", "parf", "config";
+		device_type = "pci";
+		linux,pci-domain = <0>;
+		bus-range = <0x00 0xff>;
+		num-lanes = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+		clocks = <&gcc PCIE_A_CLK>,
+			 <&gcc PCIE_H_CLK>,
+			 <&gcc PCIE_PHY_CLK>,
+			 <&gcc PCIE_AUX_CLK>,
+			 <&gcc PCIE_ALT_REF_CLK>;
+		clock-names = "core", "iface", "phy", "aux", "ref";
+		resets = <&gcc PCIE_ACLK_RESET>,
+			 <&gcc PCIE_HCLK_RESET>,
+			 <&gcc PCIE_POR_RESET>,
+			 <&gcc PCIE_PCI_RESET>,
+			 <&gcc PCIE_PHY_RESET>,
+			 <&gcc PCIE_EXT_RESET>;
+		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+		pinctrl-0 = <&pcie_pins_default>;
+		pinctrl-names = "default";
+	};
+
 * Example for apq8084
 	pcie0@fc520000 {
 		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";