diff mbox

[v3,03/10] USB: XHCI: Add xHCI host controller support for Exynos5

Message ID 1379147573-21897-4-git-send-email-gautam.vivek@samsung.com
State Accepted
Commit 13194f3b5f51d104bdfdd7ff5a7556136b6dc35c
Headers show

Commit Message

Vivek Gautam Sept. 14, 2013, 8:32 a.m. UTC
This adds driver layer for xHCI controller in Samsung's
exynos5 soc. This interacts with xHCI host controller stack.

Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Marek Vasut <marex@denx.de>
---

Changes since v2:
 - Replaced GPL license with new SPDX license GPL-2.0+.

 arch/arm/include/asm/arch-exynos/cpu.h         |    8 +
 arch/arm/include/asm/arch-exynos/xhci-exynos.h |   88 +++++++
 drivers/usb/host/Makefile                      |    1 +
 drivers/usb/host/xhci-exynos5.c                |  316 ++++++++++++++++++++++++
 include/linux/usb/dwc3.h                       |  188 ++++++++++++++
 5 files changed, 601 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-exynos/xhci-exynos.h
 create mode 100644 drivers/usb/host/xhci-exynos5.c
 create mode 100644 include/linux/usb/dwc3.h
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index cb924fb..0d2b511 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -50,6 +50,8 @@ 
 #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS4X12 */
 #define EXYNOS4X12_GPIO_PART3_BASE	0x03860000
@@ -85,6 +87,8 @@ 
 #define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS5 Common*/
 #define EXYNOS5_I2C_SPACING		0x10000
@@ -103,6 +107,8 @@ 
 #define EXYNOS5_DMC_CTRL_BASE		0x10DD0000
 #define EXYNOS5_GPIO_PART1_BASE		0x11400000
 #define EXYNOS5_MIPI_DSIM_BASE		0x11D00000
+#define EXYNOS5_USB_HOST_XHCI_BASE	0x12000000
+#define EXYNOS5_USB3PHY_BASE		0x12100000
 #define EXYNOS5_USB_HOST_EHCI_BASE	0x12110000
 #define EXYNOS5_USBPHY_BASE		0x12130000
 #define EXYNOS5_USBOTG_BASE		0x12140000
@@ -217,7 +223,9 @@  SAMSUNG_BASE(swreset, SWRESET)
 SAMSUNG_BASE(timer, PWMTIMER_BASE)
 SAMSUNG_BASE(uart, UART_BASE)
 SAMSUNG_BASE(usb_phy, USBPHY_BASE)
+SAMSUNG_BASE(usb3_phy, USB3PHY_BASE)
 SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE)
+SAMSUNG_BASE(usb_xhci, USB_HOST_XHCI_BASE)
 SAMSUNG_BASE(usb_otg, USBOTG_BASE)
 SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
 SAMSUNG_BASE(power, POWER_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/xhci-exynos.h b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
new file mode 100644
index 0000000..92b90a4
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
@@ -0,0 +1,88 @@ 
+/* Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Exynos Phy register definitions
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_XHCI_EXYNOS_H_
+#define _ASM_ARCH_XHCI_EXYNOS_H_
+
+/* Phy register MACRO definitions */
+
+#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
+
+#define PHYUTMI_OTGDISABLE			(1 << 6)
+#define PHYUTMI_FORCESUSPEND			(1 << 1)
+#define PHYUTMI_FORCESLEEP			(1 << 0)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
+
+#define PHYCLKRST_SSC_EN			(0x1 << 20)
+#define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
+#define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
+
+#define PHYCLKRST_FSEL_MASK			(0x3f << 5)
+#define PHYCLKRST_FSEL(_x)			((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN			(0x1 << 4)
+
+#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
+
+#define PHYCLKRST_PORTRESET			(0x1 << 1)
+#define PHYCLKRST_COMMONONN			(0x1 << 0)
+
+#define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
+
+#define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
+#define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
+
+#define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
+
+#define FSEL_CLKSEL_24M				(0x5)
+
+/* XHCI PHY register structure */
+struct exynos_usb3_phy {
+	unsigned int reserve1;
+	unsigned int link_system;
+	unsigned int phy_utmi;
+	unsigned int phy_pipe;
+	unsigned int phy_clk_rst;
+	unsigned int phy_reg0;
+	unsigned int phy_reg1;
+	unsigned int phy_param0;
+	unsigned int phy_param1;
+	unsigned int phy_term;
+	unsigned int phy_test;
+	unsigned int phy_adp;
+	unsigned int phy_batchg;
+	unsigned int phy_resume;
+	unsigned int reserve2[3];
+	unsigned int link_port;
+};
+
+#endif /* _ASM_ARCH_XHCI_EXYNOS_H_ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6bd6c86..eb50bc1 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -44,6 +44,7 @@  COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 
 # xhci
 COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
+COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
new file mode 100644
index 0000000..eb0ef6c
--- /dev/null
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -0,0 +1,316 @@ 
+/*
+ * SAMSUNG EXYNOS5 USB HOST XHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *	Vikas Sajjan <vikas.sajjan@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * This file is a conglomeration for DWC3-init sequence and further
+ * exynos5 specific PHY-init sequence.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <usb.h>
+#include <watchdog.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/arch/xhci-exynos.h>
+#include <asm-generic/errno.h>
+#include <linux/compat.h>
+#include <linux/usb/dwc3.h>
+
+#include "xhci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Contains pointers to register base addresses
+ * for the usb controller.
+ */
+struct exynos_xhci {
+	struct exynos_usb3_phy *usb3_phy;
+	struct xhci_hccr *hcd;
+	struct dwc3 *dwc3_reg;
+};
+
+static struct exynos_xhci exynos;
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
+{
+	fdt_addr_t addr;
+	unsigned int node;
+	int depth;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_XHCI);
+	if (node <= 0) {
+		debug("XHCI: Can't get device node for xhci\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get the base address for XHCI controller from the device node
+	 */
+	addr = fdtdec_get_addr(blob, node, "reg");
+	if (addr == FDT_ADDR_T_NONE) {
+		debug("Can't get the XHCI register base address\n");
+		return -ENXIO;
+	}
+	exynos->hcd = (struct xhci_hccr *)addr;
+
+	depth = 0;
+	node = fdtdec_next_compatible_subnode(blob, node,
+				COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth);
+	if (node <= 0) {
+		debug("XHCI: Can't get device node for usb3-phy controller\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get the base address for usbphy from the device node
+	 */
+	exynos->usb3_phy = (struct exynos_usb3_phy *)fdtdec_get_addr(blob, node,
+								"reg");
+	if (exynos->usb3_phy == NULL) {
+		debug("Can't get the usbphy register address\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+#endif
+
+static void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
+{
+	u32 reg;
+
+	/* enabling usb_drd phy */
+	set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN);
+
+	/* Reset USB 3.0 PHY */
+	writel(0x0, &phy->phy_reg0);
+
+	clrbits_le32(&phy->phy_param0,
+			/* Select PHY CLK source */
+			PHYPARAM0_REF_USE_PAD |
+			/* Set Loss-of-Signal Detector sensitivity */
+			PHYPARAM0_REF_LOSLEVEL_MASK);
+	setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
+
+	writel(0x0, &phy->phy_resume);
+
+	/*
+	 * Setting the Frame length Adj value[6:1] to default 0x20
+	 * See xHCI 1.0 spec, 5.2.4
+	 */
+	setbits_le32(&phy->link_system,
+			LINKSYSTEM_XHCI_VERSION_CONTROL |
+			LINKSYSTEM_FLADJ(0x20));
+
+	/* Set Tx De-Emphasis level */
+	clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
+	setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
+
+	setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
+
+	/* PHYTEST POWERDOWN Control */
+	clrbits_le32(&phy->phy_test,
+			PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+
+	/* UTMI Power Control */
+	writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
+
+		/* Use core clock from main PLL */
+	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+		/* Default 24Mhz crystal clock */
+		PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
+		PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+		PHYCLKRST_SSC_REFCLKSEL(0x88) |
+		/* Force PortReset of PHY */
+		PHYCLKRST_PORTRESET |
+		/* Digital power supply in normal operating mode */
+		PHYCLKRST_RETENABLEN |
+		/* Enable ref clock for SS function */
+		PHYCLKRST_REF_SSP_EN |
+		/* Enable spread spectrum */
+		PHYCLKRST_SSC_EN |
+		/* Power down HS Bias and PLL blocks in suspend mode */
+		PHYCLKRST_COMMONONN;
+
+	writel(reg, &phy->phy_clk_rst);
+
+	/* giving time to Phy clock to settle before resetting */
+	udelay(10);
+
+	reg &= ~PHYCLKRST_PORTRESET;
+	writel(reg, &phy->phy_clk_rst);
+}
+
+static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy)
+{
+	setbits_le32(&phy->phy_utmi,
+			PHYUTMI_OTGDISABLE |
+			PHYUTMI_FORCESUSPEND |
+			PHYUTMI_FORCESLEEP);
+
+	clrbits_le32(&phy->phy_clk_rst,
+			PHYCLKRST_REF_SSP_EN |
+			PHYCLKRST_SSC_EN |
+			PHYCLKRST_COMMONONN);
+
+	/* PHYTEST POWERDOWN Control to remove leakage current */
+	setbits_le32(&phy->phy_test,
+			PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+
+	/* disabling usb_drd phy */
+	set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE);
+}
+
+void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
+{
+	clrsetbits_le32(&dwc3_reg->g_ctl,
+			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
+			DWC3_GCTL_PRTCAPDIR(mode));
+}
+
+static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
+{
+	/* Before Resetting PHY, put Core in Reset */
+	setbits_le32(&dwc3_reg->g_ctl,
+			DWC3_GCTL_CORESOFTRESET);
+
+	/* Assert USB3 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb3pipectl[0],
+			DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Assert USB2 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb2phycfg,
+			DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb3pipectl[0],
+			DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Clear USB2 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb2phycfg,
+			DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+	/* After PHYs are stable we can take Core out of reset state */
+	clrbits_le32(&dwc3_reg->g_ctl,
+			DWC3_GCTL_CORESOFTRESET);
+}
+
+static int dwc3_core_init(struct dwc3 *dwc3_reg)
+{
+	u32 reg;
+	u32 revision;
+	unsigned int dwc3_hwparams1;
+
+	revision = readl(&dwc3_reg->g_snpsid);
+	/* This should read as U3 followed by revision number */
+	if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
+		puts("this is not a DesignWare USB3 DRD Core\n");
+		return -EINVAL;
+	}
+
+	dwc3_core_soft_reset(dwc3_reg);
+
+	dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
+
+	reg = readl(&dwc3_reg->g_ctl);
+	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+	reg &= ~DWC3_GCTL_DISSCRAMBLE;
+	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
+	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	default:
+		debug("No power optimization available\n");
+	}
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.90a have a bug
+	 * where the device can fail to connect at SuperSpeed
+	 * and falls back to high-speed mode which causes
+	 * the device to enter a Connect/Disconnect loop
+	 */
+	if ((revision & DWC3_REVISION_MASK) < 0x190a)
+		reg |= DWC3_GCTL_U2RSTECN;
+
+	writel(reg, &dwc3_reg->g_ctl);
+
+	return 0;
+}
+
+static int exynos_xhci_core_init(struct exynos_xhci *exynos)
+{
+	int ret;
+
+	exynos5_usb3_phy_init(exynos->usb3_phy);
+
+	ret = dwc3_core_init(exynos->dwc3_reg);
+	if (ret) {
+		debug("failed to initialize core\n");
+		return -EINVAL;
+	}
+
+	/* We are hard-coding DWC3 core to Host Mode */
+	dwc3_set_mode(exynos->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+	return 0;
+}
+
+static void exynos_xhci_core_exit(struct exynos_xhci *exynos)
+{
+	exynos5_usb3_phy_exit(exynos->usb3_phy);
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+{
+	struct exynos_xhci *ctx = &exynos;
+	int ret;
+
+#ifdef CONFIG_OF_CONTROL
+	exynos_usb3_parse_dt(gd->fdt_blob, ctx);
+#else
+	ctx->usb3_phy = (struct exynos_usb3_phy *)samsung_get_base_usb3_phy();
+	ctx->hcd = (struct xhci_hccr *)samsung_get_base_usb_xhci();
+#endif
+
+	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+
+	ret = exynos_xhci_core_init(ctx);
+	if (ret) {
+		puts("XHCI: failed to initialize controller\n");
+		return -EINVAL;
+	}
+
+	*hccr = (ctx->hcd);
+	*hcor = (struct xhci_hcor *)((uint32_t) *hccr
+				+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+	debug("Exynos5-xhci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)*hccr, (uint32_t)*hcor,
+		(uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+	return 0;
+}
+
+void xhci_hcd_stop(int index)
+{
+	struct exynos_xhci *ctx = &exynos;
+
+	exynos_xhci_core_exit(ctx);
+}
diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h
new file mode 100644
index 0000000..97d179a
--- /dev/null
+++ b/include/linux/usb/dwc3.h
@@ -0,0 +1,188 @@ 
+/* include/linux/usb/dwc3.h
+ *
+ * Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Designware SuperSpeed USB 3.0 DRD Controller global and OTG registers
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DWC3_H_
+#define __DWC3_H_
+
+/* Global constants */
+#define DWC3_ENDPOINTS_NUM			32
+
+#define DWC3_EVENT_BUFFERS_SIZE			PAGE_SIZE
+#define DWC3_EVENT_TYPE_MASK			0xfe
+
+#define DWC3_EVENT_TYPE_DEV			0
+#define DWC3_EVENT_TYPE_CARKIT			3
+#define DWC3_EVENT_TYPE_I2C			4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT		0
+#define DWC3_DEVICE_EVENT_RESET			1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE		2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
+#define DWC3_DEVICE_EVENT_WAKEUP		4
+#define DWC3_DEVICE_EVENT_EOPF			6
+#define DWC3_DEVICE_EVENT_SOF			7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
+#define DWC3_DEVICE_EVENT_CMD_CMPL		10
+#define DWC3_DEVICE_EVENT_OVERFLOW		11
+
+#define DWC3_GEVNTCOUNT_MASK			0xfffc
+#define DWC3_GSNPSID_MASK			0xffff0000
+#define DWC3_GSNPSID_SHIFT			16
+#define DWC3_GSNPSREV_MASK			0xffff
+
+#define DWC3_REVISION_MASK			0xffff
+
+#define DWC3_REG_OFFSET				0xC100
+
+struct g_event_buffer {
+	u64 g_evntadr;
+	u32 g_evntsiz;
+	u32 g_evntcount;
+};
+
+struct d_physical_endpoint {
+	u32 d_depcmdpar2;
+	u32 d_depcmdpar1;
+	u32 d_depcmdpar0;
+	u32 d_depcmd;
+};
+
+struct dwc3 {					/* offset: 0xC100 */
+	u32 g_sbuscfg0;
+	u32 g_sbuscfg1;
+	u32 g_txthrcfg;
+	u32 g_rxthrcfg;
+	u32 g_ctl;
+
+	u32 reserved1;
+
+	u32 g_sts;
+
+	u32 reserved2;
+
+	u32 g_snpsid;
+	u32 g_gpio;
+	u32 g_uid;
+	u32 g_uctl;
+	u64 g_buserraddr;
+	u64 g_prtbimap;
+
+	u32 g_hwparams0;
+	u32 g_hwparams1;
+	u32 g_hwparams2;
+	u32 g_hwparams3;
+	u32 g_hwparams4;
+	u32 g_hwparams5;
+	u32 g_hwparams6;
+	u32 g_hwparams7;
+
+	u32 g_dbgfifospace;
+	u32 g_dbgltssm;
+	u32 g_dbglnmcc;
+	u32 g_dbgbmu;
+	u32 g_dbglspmux;
+	u32 g_dbglsp;
+	u32 g_dbgepinfo0;
+	u32 g_dbgepinfo1;
+
+	u64 g_prtbimap_hs;
+	u64 g_prtbimap_fs;
+
+	u32 reserved3[28];
+
+	u32 g_usb2phycfg[16];
+	u32 g_usb2i2cctl[16];
+	u32 g_usb2phyacc[16];
+	u32 g_usb3pipectl[16];
+
+	u32 g_txfifosiz[32];
+	u32 g_rxfifosiz[32];
+
+	struct g_event_buffer g_evnt_buf[32];
+
+	u32 g_hwparams8;
+
+	u32 reserved4[63];
+
+	u32 d_cfg;
+	u32 d_ctl;
+	u32 d_evten;
+	u32 d_sts;
+	u32 d_gcmdpar;
+	u32 d_gcmd;
+
+	u32 reserved5[2];
+
+	u32 d_alepena;
+
+	u32 reserved6[55];
+
+	struct d_physical_endpoint d_phy_ep_cmd[32];
+
+	u32 reserved7[128];
+
+	u32 o_cfg;
+	u32 o_ctl;
+	u32 o_evt;
+	u32 o_evten;
+	u32 o_sts;
+
+	u32 reserved8[3];
+
+	u32 adp_cfg;
+	u32 adp_ctl;
+	u32 adp_evt;
+	u32 adp_evten;
+
+	u32 bc_cfg;
+
+	u32 reserved9;
+
+	u32 bc_evt;
+	u32 bc_evten;
+};
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n)			((n) << 19)
+#define DWC3_GCTL_U2RSTECN			(1 << 16)
+#define DWC3_GCTL_RAMCLKSEL(x)			\
+		(((x) & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS			(0)
+#define DWC3_GCTL_CLK_PIPE			(1)
+#define DWC3_GCTL_CLK_PIPEHALF			(2)
+#define DWC3_GCTL_CLK_MASK			(3)
+#define DWC3_GCTL_PRTCAP(n)			(((n) & (3 << 12)) >> 12)
+#define DWC3_GCTL_PRTCAPDIR(n)			((n) << 12)
+#define DWC3_GCTL_PRTCAP_HOST			1
+#define DWC3_GCTL_PRTCAP_DEVICE			2
+#define DWC3_GCTL_PRTCAP_OTG			3
+#define DWC3_GCTL_CORESOFTRESET			(1 << 11)
+#define DWC3_GCTL_SCALEDOWN(n)			((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK		DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE			(1 << 3)
+#define DWC3_GCTL_DSBLCLKGTNG			(1 << 0)
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(n)		(((n) & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_NO		0
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK		1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST		(1 << 31)
+#define DWC3_GUSB2PHYCFG_SUSPHY			(1 << 6)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST		(1 << 31)
+#define DWC3_GUSB3PIPECTL_SUSPHY		(1 << 17)
+
+/* Global TX Fifo Size Register */
+#define DWC3_GTXFIFOSIZ_TXFDEF(n)		((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n)		((n) & 0xffff0000)
+
+#endif /* __DWC3_H_ */