diff mbox series

[4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings

Message ID 1582566751-13118-5-git-send-email-ben.levinsky@xilinx.com
State New
Headers show
Series remoteproc: Add zynqmp_r5 driver | expand

Commit Message

Ben Levinsky Feb. 24, 2020, 5:52 p.m. UTC 
From: Jason Wu <j.wu@xilinx.com>

Add binding for ZynqMP R5 OpenAMP.

Represent the RPU domain resources in one device node. Each RPU
processor is a subnode of the top RPU domain node.

Signed-off-by: Jason Wu <j.wu@xilinx.com>
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 .../remoteproc/xilinx,zynqmp-r5-remoteproc.txt     | 135 +++++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.txt b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.txt
new file mode 100644
index 0000000..ee7a515
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.txt
@@ -0,0 +1,135 @@ 
+Xilinx ARM Cortex A53-R5 remoteproc driver
+==========================================
+
+ZynqMP family of devices use two Cortex R5 processors to help with various
+low power / real time tasks.
+
+This driver requires specific ZynqMP hardware design.
+
+ZynqMP R5 Device Node:
+=================================
+A ZynqMP R5 device node is used to represent RPU domain
+within ZynqMP SoC. This device node contains RPU processor
+subnodes.
+
+Required Properties:
+--------------------
+ - compatible : Should be "xlnx,zynqmp-r5-remoteproc-1.0"
+ - core_conf : R5 core configuration (valid string - split or lock-step)
+ - interrupts : Interrupt mapping for remoteproc IPI. It is required if the
+                user uses the remoteproc driver with the RPMsg kernel driver.
+ - interrupt-parent : Phandle for the interrupt controller. It is required if
+                      the user uses the remoteproc driver with the RPMsg kernel
+                      kernel driver.
+
+ZynqMP R5 Remoteproc Device Node:
+=================================
+A ZynqMP R5 Remoteproc device node is used to represent a RPU processor.
+It is a subnode to the ZynqMP R5 device node. It also contains tightly
+coupled memory subnodes.
+
+Required Properties:
+--------------------
+ - pnode-id:	ZynqMP R5 processor power domain ID which will be used by
+		ZynqMP power management unit to idetify the processor.
+
+Optional Properties:
+--------------------
+ - memory-region: reserved memory which will be used by R5 processor
+
+
+ZynqMP R5 Remoteproc Device Node:
+=================================
+A ZynqMP R5 Remoteproc device node is used to represent a RPU processor.
+It is a subnode to the ZynqMP R5 device node.
+
+Required Properties:
+--------------------
+ - pnode-id:	ZynqMP R5 processor power domain ID which will be used by
+		ZynqMP power management unit to idetify the processor.
+
+Optional Properties:
+--------------------
+ - memory-region:	reserved memory which will be used by R5 processor
+ - mboxes:		Specify tx and rx mailboxes
+ - mbox-names:		List of identifier strings for tx/rx mailbox channel.
+
+ZynqMP R5 TCM Device Node:
+=================================
+The ZynqMP R5 TCM device node is used to represent the TCM memory.
+It is a subnode to the ZynqMP R5 processor.
+
+Required Properties:
+--------------------
+ - reg:		TCM address range
+ - pnode-id:	TCM power domain ID
+
+
+Example:
+--------
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* R5 0 firmware memory in DDR */
+		rproc_0_fw_reserved: rproc@3ed000000 {
+			no-map;
+			reg = <0x0 0x3ed00000 0x0 0x40000>;
+		};
+		/* DMA shared memory between APU and RPU */
+		rpu0vdev0buffer: rpu0vdev0buffer@3ed400000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x3ed40000 0x0 0x100000>;
+		};
+	};
+
+	zynqmp-r5-remoteproc@0 {
+		compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
+		core_conf = "split";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		r5-0: r5@0 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			memory-region = <&rproc_0_fw_reserved>,
+					<&rpu0vdev0buffer>;
+			pnode-id = <0x7>;
+			mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+			mbox-names = "tx", "rx";
+			tcm-a: tcm@0 {
+				reg = <0x0 0xFFE00000 0x0 0x10000>,
+				pnode-id = <0xf>;
+			};
+			tcm-b: tcm@1 {
+				reg = <0x0 0xFFE20000 0x0 0x10000>,
+				pnode-id = <0x10>;
+			};
+		};
+	} ;
+
+	zynqmp_ipi {
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <0 29 4>;
+		xlnx,ipi-id = <7>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* APU<->RPU0 IPI mailbox controller */
+		ipi_mailbox_rpu0: mailbox@ff90600 {
+			reg = <0xff990600 0x20>,
+			      <0xff990620 0x20>,
+			      <0xff9900c0 0x20>,
+			      <0xff9900e0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <1>;
+		};
+	};