diff mbox series

[v6,1/8] ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro

Message ID 20200324135653.6676-1-geert+renesas@glider.be
State New
Headers show
Series gpio: Add GPIO Aggregator | expand

Commit Message

Geert Uytterhoeven March 24, 2020, 1:56 p.m. UTC
impd1_probe() fills in the GPIO lookup table by manually populating an
array of gpiod_lookup structures.  Use the existing GPIO_LOOKUP() helper
macro instead, to relax a dependency on the gpiod_lookup structure's
member names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-arm-kernel@lists.infradead.org
---
While this patch is a dependency for "[PATCH v6 4/8] gpiolib: Add
support for GPIO lookup by line name", it can be applied independently.
But an Acked-by would be nice, too.

Cover letter and full series at
https://lore.kernel.org/r/20200324135328.5796-1-geert+renesas@glider.be/

v6:
  - New.
---
 arch/arm/mach-integrator/impd1.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 1ecbea5331d6ed8b..6f875ded841924d8 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -410,13 +410,10 @@  static int __ref impd1_probe(struct lm_device *dev)
 			 * 5 = Key lower right
 			 */
 			/* We need the two MMCI GPIO entries */
-			lookup->table[0].chip_label = chipname;
-			lookup->table[0].chip_hwnum = 3;
-			lookup->table[0].con_id = "wp";
-			lookup->table[1].chip_label = chipname;
-			lookup->table[1].chip_hwnum = 4;
-			lookup->table[1].con_id = "cd";
-			lookup->table[1].flags = GPIO_ACTIVE_LOW;
+			lookup->table[0] = (struct gpiod_lookup)
+				GPIO_LOOKUP(chipname, 3, "wp", 0);
+			lookup->table[1] = (struct gpiod_lookup)
+				GPIO_LOOKUP(chipname, 4, "cd", GPIO_ACTIVE_LOW);
 			gpiod_add_lookup_table(lookup);
 		}