diff mbox series

[2/2,v3] leds: ns2: Convert to GPIO descriptors

Message ID 20200220150833.56542-2-linus.walleij@linaro.org
State Superseded
Headers show
Series None | expand

Commit Message

Linus Walleij Feb. 20, 2020, 3:08 p.m. UTC
This converts the NS2 LED driver to use GPIO descriptors.
We take care to request the GPIOs "as is" which is what
the current driver goes to lengths to achieve, then we use
GPIOs throughout.

As the nodes for each LED does not have any corresponding
device, we need to use the DT-specific accessors to get these
GPIO descriptors from the device tree.

Cc: Vincent Donnefort <vdonnefort@gmail.com>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Move the header inclusion changes from patch 1/2 into
  this patch.
ChangeLog v1->v2:
- Collected Simon's Tested-by tag.
---
 drivers/leds/leds-ns2.c | 76 +++++++++++++++++------------------------
 1 file changed, 32 insertions(+), 44 deletions(-)
diff mbox series

Patch

diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index aefac3461138..538ca5755602 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -12,11 +12,10 @@ 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include "leds.h"
 
 enum ns2_led_modes {
@@ -34,8 +33,8 @@  struct ns2_led_modval {
 struct ns2_led {
 	const char	*name;
 	const char	*default_trigger;
-	unsigned	cmd;
-	unsigned	slow;
+	struct gpio_desc *cmd;
+	struct gpio_desc *slow;
 	int		num_modes;
 	struct ns2_led_modval *modval;
 };
@@ -54,8 +53,8 @@  struct ns2_led_platform_data {
 
 struct ns2_led_data {
 	struct led_classdev	cdev;
-	unsigned int		cmd;
-	unsigned int		slow;
+	struct gpio_desc	*cmd;
+	struct gpio_desc	*slow;
 	bool			can_sleep;
 	unsigned char		sata; /* True when SATA mode active. */
 	rwlock_t		rw_lock; /* Lock GPIOs. */
@@ -71,8 +70,8 @@  static int ns2_led_get_mode(struct ns2_led_data *led_dat,
 	int cmd_level;
 	int slow_level;
 
-	cmd_level = gpio_get_value_cansleep(led_dat->cmd);
-	slow_level = gpio_get_value_cansleep(led_dat->slow);
+	cmd_level = gpiod_get_value_cansleep(led_dat->cmd);
+	slow_level = gpiod_get_value_cansleep(led_dat->slow);
 
 	for (i = 0; i < led_dat->num_modes; i++) {
 		if (cmd_level == led_dat->modval[i].cmd_level &&
@@ -105,15 +104,15 @@  static void ns2_led_set_mode(struct ns2_led_data *led_dat,
 	write_lock_irqsave(&led_dat->rw_lock, flags);
 
 	if (!led_dat->can_sleep) {
-		gpio_set_value(led_dat->cmd,
-			       led_dat->modval[i].cmd_level);
-		gpio_set_value(led_dat->slow,
-			       led_dat->modval[i].slow_level);
+		gpiod_set_value(led_dat->cmd,
+				led_dat->modval[i].cmd_level);
+		gpiod_set_value(led_dat->slow,
+				led_dat->modval[i].slow_level);
 		goto exit_unlock;
 	}
 
-	gpio_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
-	gpio_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
+	gpiod_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
+	gpiod_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
 
 exit_unlock:
 	write_unlock_irqrestore(&led_dat->rw_lock, flags);
@@ -201,26 +200,6 @@  create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	int ret;
 	enum ns2_led_modes mode;
 
-	ret = devm_gpio_request_one(&pdev->dev, template->cmd,
-			gpio_get_value_cansleep(template->cmd) ?
-			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-			template->name);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
-			template->name);
-		return ret;
-	}
-
-	ret = devm_gpio_request_one(&pdev->dev, template->slow,
-			gpio_get_value_cansleep(template->slow) ?
-			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-			template->name);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
-			template->name);
-		return ret;
-	}
-
 	rwlock_init(&led_dat->rw_lock);
 
 	led_dat->cdev.name = template->name;
@@ -230,8 +209,8 @@  create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	led_dat->cdev.groups = ns2_led_groups;
 	led_dat->cmd = template->cmd;
 	led_dat->slow = template->slow;
-	led_dat->can_sleep = gpio_cansleep(led_dat->cmd) |
-				gpio_cansleep(led_dat->slow);
+	led_dat->can_sleep = gpiod_cansleep(led_dat->cmd) |
+				gpiod_cansleep(led_dat->slow);
 	if (led_dat->can_sleep)
 		led_dat->cdev.brightness_set_blocking = ns2_led_set_blocking;
 	else
@@ -286,17 +265,26 @@  ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
 		const char *string;
 		int i, num_modes;
 		struct ns2_led_modval *modval;
+		struct gpio_desc *gd;
 
-		ret = of_get_named_gpio(child, "cmd-gpio", 0);
-		if (ret < 0)
-			goto err_node_put;
-		led->cmd = ret;
-		ret = of_get_named_gpio(child, "slow-gpio", 0);
-		if (ret < 0)
-			goto err_node_put;
-		led->slow = ret;
 		ret = of_property_read_string(child, "label", &string);
 		led->name = (ret == 0) ? string : child->name;
+
+		gd = gpiod_get_from_of_node(child, "cmd-gpio", 0,
+					    GPIOD_ASIS, led->name);
+		if (IS_ERR(gd)) {
+			ret = PTR_ERR(gd);
+			goto err_node_put;
+		}
+		led->cmd = gd;
+		gd = gpiod_get_from_of_node(child, "slow-gpio", 0,
+					    GPIOD_ASIS, led->name);
+		if (IS_ERR(gd)) {
+			ret = PTR_ERR(gd);
+			goto err_node_put;
+		}
+		led->slow = gd;
+
 		ret = of_property_read_string(child, "linux,default-trigger",
 					      &string);
 		if (ret == 0)