diff mbox series

[v2,18/19] media: ti-vpe: cal: improve wait for stop-state

Message ID 20200319075023.22151-19-tomi.valkeinen@ti.com
State New
Headers show
Series CAL fixes and improvements | expand

Commit Message

Tomi Valkeinen March 19, 2020, 7:50 a.m. UTC 
Sometimes there is a timeout when waiting for the Stop-State.  Testing
shows that sometimes we need to wait more than what the current code
does. It is not clear how long this wait can be, but it is based on how
quickly the sensor provides a valid clock, and how quickly CAL syncs to
it.

Change the code to make it more obvious how long we'll wait, and set a
wider range for usleep_range. Increase the timeout to 750ms.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/cal.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 0dc7892881e7..0f90078ee8c2 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -846,19 +846,16 @@  static void csi2_wait_complexio_reset(struct cal_ctx *ctx)
 
 static void csi2_wait_stop_state(struct cal_ctx *ctx)
 {
-	int i;
+	unsigned long timeout;
 
-	for (i = 0; i < 10; i++) {
+	timeout = jiffies + msecs_to_jiffies(750);
+	while (time_before(jiffies, timeout)) {
 		if (reg_read_field(ctx->dev,
 				   CAL_CSI2_TIMING(ctx->csi2_port),
 				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
 			break;
-		usleep_range(1000, 1100);
+		usleep_range(500, 5000);
 	}
-	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Stop State Reached %s\n",
-		ctx->csi2_port,
-		reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)),
-		(i >= 10) ? "(timeout)" : "");
 
 	if (reg_read_field(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port),
 			   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)