@@ -16,6 +16,9 @@
#include "sdhci-pltfm.h"
+/* DWCMSHC specific Mode Select value */
+#define DWCMSHC_CTRL_HS400 0x7
+
#define BOUNDARY_OK(addr, len) \
((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
@@ -46,10 +49,36 @@ static void dwcmshc_adma_write_desc(struct sdhci_host *host, void **desc,
sdhci_adma_write_desc(host, desc, addr, len, cmd);
}
+static void dwcmshc_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if ((timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR104))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if ((timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_MMC_HS))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= DWCMSHC_CTRL_HS400;
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
static const struct sdhci_ops sdhci_dwcmshc_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = dwcmshc_set_uhs_signaling,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.reset = sdhci_reset,
.adma_write_desc = dwcmshc_adma_write_desc,
We need a different set_uhs_signaling implementation for MMC_TIMING_MMC_HS and MMC_TIMING_MMC_HS400. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> --- drivers/mmc/host/sdhci-of-dwcmshc.c | 31 ++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)