diff mbox series

[V2,3/3] mmc: mmci: Switch to mmc_regulator_set_vqmmc()

Message ID 20200416163649.336967-3-marex@denx.de
State New
Headers show
Series None | expand

Commit Message

Marek Vasut April 16, 2020, 4:36 p.m. UTC 
Instead of reimplementing the logic in mmc_regulator_set_vqmmc(),
use the mmc code function directly.

This fixes a real issue on STM32MP1 where, if the eMMC is supplied with
VccQ=1.8 V, the post voltage switch code will spin indefinitelly waiting
for the voltage switch to complete, even though no voltage switch really
happened. But since mmc_set_signal_voltage() would return 0, then the
condition for calling .post_sig_volt_switch() is not satisfied if the
switch did not happen.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ludovic Barre <ludovic.barre@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-mmc@vger.kernel.org
---
V2: Reword commit message
---
 drivers/mmc/host/mmci.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 647567def612..a69d6a0c2e15 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1861,31 +1861,17 @@  static int mmci_get_cd(struct mmc_host *mmc)
 static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmci_host *host = mmc_priv(mmc);
-	int ret = 0;
-
-	if (!IS_ERR(mmc->supply.vqmmc)) {
+	int ret;
 
-		switch (ios->signal_voltage) {
-		case MMC_SIGNAL_VOLTAGE_330:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						2700000, 3600000);
-			break;
-		case MMC_SIGNAL_VOLTAGE_180:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						1700000, 1950000);
-			break;
-		case MMC_SIGNAL_VOLTAGE_120:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						1100000, 1300000);
-			break;
-		}
+	ret = mmc_regulator_set_vqmmc(mmc, ios);
 
-		if (!ret && host->ops && host->ops->post_sig_volt_switch)
-			ret = host->ops->post_sig_volt_switch(host, ios);
+	if (!ret && host->ops && host->ops->post_sig_volt_switch)
+		ret = host->ops->post_sig_volt_switch(host, ios);
+	else if (ret)
+		ret = 0;
 
-		if (ret)
-			dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
-	}
+	if (ret < 0)
+		dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
 
 	return ret;
 }