[tip:,timers/core] clocksource/drivers/timer-ti-32k: Add support for initializing directly

Message ID 159101710704.17951.8363727578897055242.tip-bot2@tip-bot2
State New
Headers show
Series
  • [tip:,timers/core] clocksource/drivers/timer-ti-32k: Add support for initializing directly
Related show

Commit Message

tip-bot2 for Vitaly Chikunov June 1, 2020, 1:11 p.m.
The following commit has been merged into the timers/core branch of tip:

Commit-ID:     d15483bb49bae0f9cbb67c54becec252545752d3
Gitweb:        https://git.kernel.org/tip/d15483bb49bae0f9cbb67c54becec252545752d3
Author:        Tony Lindgren <tony@atomide.com>
AuthorDate:    Thu, 07 May 2020 10:23:17 -07:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 18 May 2020 18:56:35 +02:00

clocksource/drivers/timer-ti-32k: Add support for initializing directly

Let's allow probing the 32k counter directly based on devicetree data to
prepare for dropping the related legacy platform code. Let's only do this
if the parent node is compatible with ti-sysc to make sure we have the
related devicetree data available.

Let's also show the 32k counter information before registering the
clocksource, now we see it after the clocksource information which is a
bit confusing.

Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200507172330.18679-2-tony@atomide.com
---
 drivers/clocksource/timer-ti-32k.c | 48 ++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
index abd5f15..ae12bbf 100644
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -24,6 +24,7 @@ 
  * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
  */
 
+#include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/sched_clock.h>
@@ -76,6 +77,49 @@  static u64 notrace omap_32k_read_sched_clock(void)
 	return ti_32k_read_cycles(&ti_32k_timer.cs);
 }
 
+static void __init ti_32k_timer_enable_clock(struct device_node *np,
+					     const char *name)
+{
+	struct clk *clock;
+	int error;
+
+	clock = of_clk_get_by_name(np->parent, name);
+	if (IS_ERR(clock)) {
+		/* Only some SoCs have a separate interface clock */
+		if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
+			return;
+
+		pr_warn("%s: could not get clock %s %li\n",
+			__func__, name, PTR_ERR(clock));
+		return;
+	}
+
+	error = clk_prepare_enable(clock);
+	if (error) {
+		pr_warn("%s: could not enable %s: %i\n",
+			__func__, name, error);
+		return;
+	}
+}
+
+static void __init ti_32k_timer_module_init(struct device_node *np,
+					    void __iomem *base)
+{
+	void __iomem *sysc = base + 4;
+
+	if (!of_device_is_compatible(np->parent, "ti,sysc"))
+		return;
+
+	ti_32k_timer_enable_clock(np, "fck");
+	ti_32k_timer_enable_clock(np, "ick");
+
+	/*
+	 * Force idle module as wkup domain is active with MPU.
+	 * No need to tag the module disabled for ti-sysc probe.
+	 */
+	writel_relaxed(0, sysc);
+}
+
 static int __init ti_32k_timer_init(struct device_node *np)
 {
 	int ret;
@@ -90,6 +134,7 @@  static int __init ti_32k_timer_init(struct device_node *np)
 		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
 
 	ti_32k_timer.counter = ti_32k_timer.base;
+	ti_32k_timer_module_init(np, ti_32k_timer.base);
 
 	/*
 	 * 32k sync Counter IP register offsets vary between the highlander
@@ -104,6 +149,8 @@  static int __init ti_32k_timer_init(struct device_node *np)
 	else
 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
 
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
 	if (ret) {
 		pr_err("32k_counter: can't register clocksource\n");
@@ -111,7 +158,6 @@  static int __init ti_32k_timer_init(struct device_node *np)
 	}
 
 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
-	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
 
 	return 0;
 }