[12/14] ARM: dts: Configure interconnect target module for dra7 tptc0

Message ID 20200303221528.49099-13-tony@atomide.com
State New
Headers show
Series
  • [01/14] bus: ti-sysc: Detect EDMA and set quirk flags for tptc
Related show

Commit Message

Tony Lindgren March 3, 2020, 10:15 p.m.
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -365,12 +365,23 @@  edma: dma@0 {
 			};
 		};
 
-		edma_tptc0: tptc@43400000 {
-			compatible = "ti,edma3-tptc";
+		target-module@43400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tptc0";
-			reg =	<0x43400000 0x100000>;
-			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+			reg = <0x43400000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43400000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		edma_tptc1: tptc@43500000 {