diff mbox series

[11/14] ARM: dts: Configure interconnect target module for dra7 tpcc

Message ID 20200303221528.49099-12-tony@atomide.com
State New
Headers show
Series [01/14] bus: ti-sysc: Detect EDMA and set quirk flags for tptc | expand

Commit Message

Tony Lindgren March 3, 2020, 10:15 p.m. UTC
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi | 51 ++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -331,27 +331,38 @@  dra7_iodelay_core: padconf@4844a000 {
 			#pinctrl-cells = <2>;
 		};
 
-		edma: edma@43300000 {
-			compatible = "ti,edma3-tpcc";
+		target-module@43300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tpcc";
-			reg = <0x43300000 0x100000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <20 21>;
-			 * for example. Note that these channels need to be
-			 * masked in the xbar as well.
-			 */
+			reg = <0x43300000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43300000 0x100000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x100000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+				/*
+				* memcpy is disabled, can be enabled with:
+				* ti,edma-memcpy-channels = <20 21>;
+				* for example. Note that these channels need to be
+				* masked in the xbar as well.
+				*/
+			};
 		};
 
 		edma_tptc0: tptc@43400000 {