diff mbox series

power: supply: max8998_charger: Correct ONLINE and add STATUS props

Message ID CY4PR04MB066382CE428A87AD131DB96CA3BA0@CY4PR04MB0663.namprd04.prod.outlook.com
State Accepted
Commit 5d809cb28056221e1b13459f7a2ddfa28305b74f
Headers show
Series power: supply: max8998_charger: Correct ONLINE and add STATUS props | expand

Commit Message

Jonathan Bakker May 16, 2020, 10:35 p.m. UTC
The ONLINE prop should be when the charger is present (ie able to
charge), however, it was for when it was actually charging or not.
Instead, add the STATUS prop to show whether charging is actually
going on or not.

The magic numbers have been ported from a downstream kernel for the
SGH-T959V.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
 drivers/power/supply/max8998_charger.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c
index 9a926c7c0f22..c26023b19f26 100644
--- a/drivers/power/supply/max8998_charger.c
+++ b/drivers/power/supply/max8998_charger.c
@@ -23,6 +23,7 @@  struct max8998_battery_data {
 static enum power_supply_property max8998_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
 	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+	POWER_SUPPLY_PROP_STATUS, /* charger is charging/discharging/full */
 };
 
 /* Note that the charger control is done by a current regulator "CHARGER" */
@@ -49,10 +50,28 @@  static int max8998_battery_get_property(struct power_supply *psy,
 		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
 		if (ret)
 			return ret;
-		if (reg & (1 << 3))
-			val->intval = 0;
-		else
+
+		if (reg & (1 << 5))
 			val->intval = 1;
+		else
+			val->intval = 0;
+
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+
+		if (!(reg & (1 << 5))) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		} else {
+			if (reg & (1 << 6))
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else if (reg & (1 << 3))
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
 		break;
 	default:
 		return -EINVAL;