diff mbox series

[V3,2/2] thermal: Add HiSilicon Kunpeng thermal driver

Message ID 1587455093-33876-3-git-send-email-shenyang39@huawei.com
State Superseded
Headers show
Series [V3,1/2] MAINTAINERS: Add maintainers for kunpeng thermal | expand

Commit Message

Yang Shen April 21, 2020, 7:44 a.m. UTC
Support HiSilicon Kunpeng tsensor. the driver will report the max
temperature for each core.

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Kunshan Tang <tangkunshan@huawei.com>
---
 drivers/thermal/Kconfig           |   8 ++
 drivers/thermal/Makefile          |   1 +
 drivers/thermal/kunpeng_thermal.c | 216 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 225 insertions(+)
 create mode 100644 drivers/thermal/kunpeng_thermal.c

--
2.7.4
diff mbox series

Patch

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5a05db5..7611b5d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -239,6 +239,14 @@  config HISI_THERMAL
 	  thermal framework. cpufreq is used as the cooling device to throttle
 	  CPUs when the passive trip is crossed.

+config KUNPENG_THERMAL
+	tristate "HiSilicon kunpeng thermal driver"
+	depends on ARM64 || COMPILE_TEST
+	help
+	  Enable this to plug HiSilicon kunpeng's thermal sensors driver into
+	  the Linux thermal framework, which supports to get the highest
+	  temperature of one Kunpeng SoC.
+
 config IMX_THERMAL
 	tristate "Temperature sensor driver for Freescale i.MX SoCs"
 	depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 9fb88e2..88ffca5 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -57,3 +57,4 @@  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
+obj-$(CONFIG_KUNPENG_THERMAL)     += kunpeng_thermal.o
diff --git a/drivers/thermal/kunpeng_thermal.c b/drivers/thermal/kunpeng_thermal.c
new file mode 100644
index 0000000..d22e875
--- /dev/null
+++ b/drivers/thermal/kunpeng_thermal.c
@@ -0,0 +1,216 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020 HiSilicon Limited. */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define KUNPENG_TSENSOR_CONTROL			0x20D0
+#define KUNPENG_TSENSOR_ST			0x60D0
+#define KUNPENG_TSENSOR_SAMPLE			0x60D4
+#define KUNPENG_TSENSOR_CONTROL_EN		BIT(0)
+
+#define KUNPENG_TSENSOR_IS_READY(reg)		(((reg) >> 12) & 0x1)
+#define KUNPENG_TSENSOR_IS_VALID(reg)		(((reg) >> 31) & 0x1)
+#define KUNPENG_TSENSOR_TRIM_HIGH(reg)		(((reg) >> 15) & 0x7FF)
+#define KUNPENG_TSENSOR_TRIM_LOW(reg)		((reg) & 0x7FF)
+#define KUNPENG_TSENSOR_TEMP_VAL(reg)		((reg) & 0x3FF)
+#define KUNPENG_TSENSOR_BASE_NUM(num)		(2 * (num))
+#define KUNPENG_TSENSOR_TRIM_NUM(num)		(2 * (num) + 1)
+
+#define KUNPENG_TSENSOR_RD_INTVRL_US		5
+#define KUNPENG_TSENSOR_RD_TMOUT_US		5000
+#define KUNPENG_TSENSOR_BASIC_TMP		25000
+#define KUNPENG_TSENSOR_BASIC_TRIM_RANGE	80000
+
+struct kunpeng_tsensor {
+	void __iomem *base;
+	void __iomem *trim_register;
+};
+
+struct kunpeng_thermal_dev {
+	u32 num_tsensors;
+	struct kunpeng_tsensor tsensor[];
+};
+
+static int kunpeng_thermal_temp_correct(u32 tmp, u32 trim)
+{
+	int trim_high = KUNPENG_TSENSOR_TRIM_HIGH(trim);
+	int trim_low = KUNPENG_TSENSOR_TRIM_LOW(trim);
+	int val = KUNPENG_TSENSOR_TEMP_VAL(tmp);
+
+	if (trim_high == trim_low)
+		return INT_MIN;
+
+	/* temperature of tsensor needs to be calibrated */
+	return KUNPENG_TSENSOR_BASIC_TRIM_RANGE * (val - trim_low) /
+	       (trim_high - trim_low) + KUNPENG_TSENSOR_BASIC_TMP;
+}
+
+static int kunpeng_thermal_get_temp(struct thermal_zone_device *thermal,
+				    int *temp)
+{
+	struct kunpeng_thermal_dev *tdev = thermal->devdata;
+	int tempmax = INT_MIN;
+	u32 i, reg, tmp, trim;
+	int ret;
+
+	for (i = 0; i < tdev->num_tsensors; i++) {
+		/* Waiting for tsensor ready */
+		ret = readl_relaxed_poll_timeout(tdev->tsensor[i].base +
+						 KUNPENG_TSENSOR_ST, reg,
+						 KUNPENG_TSENSOR_IS_READY(reg),
+						 KUNPENG_TSENSOR_RD_INTVRL_US,
+						 KUNPENG_TSENSOR_RD_TMOUT_US);
+		if (ret) {
+			dev_err(&thermal->device,
+				"Tsensor%u isn't ready!\n", i);
+			continue;
+		}
+
+		/* checking if temperatures are valid */
+		tmp = readl_relaxed(tdev->tsensor[i].base +
+				    KUNPENG_TSENSOR_SAMPLE);
+		if (!KUNPENG_TSENSOR_IS_VALID(tmp)) {
+			dev_err(&thermal->device,
+				"Tsensor%u temperature is invalid!\n", i);
+			continue;
+		}
+
+		trim = readl_relaxed(tdev->tsensor[i].trim_register);
+
+		ret = kunpeng_thermal_temp_correct(tmp, trim);
+		if (ret == INT_MIN) {
+			dev_err(&thermal->device,
+				"Tsensor%u trim value is invalid!\n", i);
+			continue;
+		}
+
+		tempmax = max(ret, tempmax);
+	}
+
+	if (tempmax == INT_MIN)
+		return -EINVAL;
+
+	*temp = tempmax;
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+	.get_temp	= kunpeng_thermal_get_temp,
+};
+
+static int kunpeng_thermal_get_iobase(struct platform_device *pdev,
+				      struct kunpeng_tsensor *tsensor,
+				      u32 resource_num)
+{
+	struct resource *res;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, resource_num);
+	if (!res)
+		return -EINVAL;
+
+	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (IS_ERR(base))
+		return -EINVAL;
+
+	if (resource_num & 1)
+		tsensor->trim_register = base;
+	else
+		tsensor->base = base;
+
+	return 0;
+}
+
+static int kunpeng_thermal_probe(struct platform_device *pdev)
+{
+	u32 num_tsensors = pdev->num_resources >> 1;
+	struct thermal_zone_device *thermal_zone;
+	struct kunpeng_thermal_dev *tdev;
+	u32 i, reg;
+	int ret;
+
+	tdev = devm_kzalloc(&pdev->dev, sizeof(*tdev) + sizeof(*tdev->tsensor) *
+			    num_tsensors, GFP_KERNEL);
+	if (!tdev)
+		return -ENOMEM;
+
+	tdev->num_tsensors = num_tsensors;
+
+	for (i = 0; i < num_tsensors; i++) {
+		ret = kunpeng_thermal_get_iobase(pdev, &tdev->tsensor[i],
+						 KUNPENG_TSENSOR_BASE_NUM(i));
+		if (ret) {
+			dev_err(&pdev->dev, "Fail to ioremap base!\n");
+			return ret;
+		}
+
+		ret = kunpeng_thermal_get_iobase(pdev, &tdev->tsensor[i],
+						 KUNPENG_TSENSOR_TRIM_NUM(i));
+		if (ret) {
+			dev_err(&pdev->dev, "Fail to ioremap trim register!\n");
+			return ret;
+		}
+
+		reg = readl_relaxed(tdev->tsensor[i].base +
+				    KUNPENG_TSENSOR_CONTROL);
+		writel_relaxed(reg | KUNPENG_TSENSOR_CONTROL_EN,
+			       tdev->tsensor[i].base +
+			       KUNPENG_TSENSOR_CONTROL);
+	}
+
+	thermal_zone = thermal_zone_device_register("kunpeng_thermal", 0, 0,
+						    tdev, &ops, NULL, 0, 0);
+	if (IS_ERR(thermal_zone)) {
+		dev_err(&pdev->dev, "Fail to register to thermal subsystem\n");
+		return PTR_ERR(thermal_zone);
+	}
+
+	platform_set_drvdata(pdev, thermal_zone);
+
+	return 0;
+}
+
+/**
+ * kunpeng_thermal_remove() - Unregister device from thermal.
+ *
+ * This driver and IMU share tsensor devices. This function only unregister
+ * devices from thermal but never disable tsensors.
+ */
+static int kunpeng_thermal_remove(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal_zone = platform_get_drvdata(pdev);
+
+	thermal_zone_device_unregister(thermal_zone);
+
+	return 0;
+}
+
+static const struct acpi_device_id kunpeng_thermal_acpi_match[] = {
+	{ "HISI0371", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, kunpeng_thermal_acpi_match);
+
+static struct platform_driver kunpeng_thermal_driver = {
+	.probe		= kunpeng_thermal_probe,
+	.remove		= kunpeng_thermal_remove,
+	.driver		= {
+		.name	= "kunpeng_thermal",
+		.acpi_match_table = ACPI_PTR(kunpeng_thermal_acpi_match),
+	},
+};
+
+module_platform_driver(kunpeng_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yang Shen <shenyang39@huawei.com>");
+MODULE_DESCRIPTION("HiSilicon Kunpeng thermal driver");