@@ -3885,6 +3885,12 @@ F: arch/powerpc/include/uapi/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
+CELLWISE CW2015 BATTERY DRIVER
+M: Tobias Schrammm <t.schramm@manjaro.org>
+S: Maintained
+F: drivers/power/supply/cw2015_battery.c
+F: Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+
CEPH COMMON CODE (LIBCEPH)
M: Ilya Dryomov <idryomov@gmail.com>
M: Jeff Layton <jlayton@kernel.org>
@@ -116,6 +116,12 @@ config BATTERY_CPCAP
Say Y here to enable support for battery on Motorola
phones and tablets such as droid 4.
+config BATTERY_CW2015
+ tristate "CW2015 Battery driver"
+ help
+ Say Y here to enable support for the cellwise cw2015
+ battery fuel gauge (used in the Pinebook Pro & others)
+
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1
@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
new file mode 100644
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2020, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@rock-chips.com>
+ * Authors: Tobias Schramm <tobias@t-sys.eu>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/timekeeping.h>
+#include <linux/workqueue.h>
+#include <linux/regmap.h>
+
+#define CW2015_SIZE_BATINFO 64
+
+#define CW2015_READ_TRIES 30
+#define CW2015_RESET_TRIES 5
+
+#define CW2015_REG_VERSION 0x0
+#define CW2015_REG_VCELL 0x2
+#define CW2015_REG_SOC 0x4
+#define CW2015_REG_RRT_ALERT 0x6
+#define CW2015_REG_CONFIG 0x8
+#define CW2015_REG_MODE 0xA
+#define CW2015_REG_BATINFO 0x10
+
+#define CW2015_MODE_SLEEP_MASK (0x3<<6)
+#define CW2015_MODE_SLEEP (0x3<<6)
+#define CW2015_MODE_NORMAL (0x0<<6)
+#define CW2015_MODE_QUICK_START (0x3<<4)
+#define CW2015_MODE_RESTART (0xf<<0)
+
+#define CW2015_CONFIG_UPDATE_FLG (0x01<<1)
+#define CW2015_ATHD(x) ((x)<<3)
+#define CW2015_MASK_ATHD (0x1f<<3)
+#define CW2015_MASK_SOC (0x1fff)
+
+#define CW2015_BATTERY_UP_MAX_CHANGE (420 * 1000)
+#define CW2015_BATTERY_DOWN_MAX_CHANGE (120 * 1000)
+#define CW2015_BATTERY_DOWN_CHANGE 60
+#define CW2015_BATTERY_DOWN_MIN_CHANGE_RUN 30
+#define CW2015_BATTERY_DOWN_MIN_CHANGE_SLEEP 1800
+#define CW2015_BATTERY_JUMP_TO_ZERO (30 * 1000)
+#define CW2015_BATTERY_CAPACITY_ERROR (40 * 1000)
+#define CW2015_BATTERY_CHARGING_ZERO (1800 * 1000)
+
+#define CW2015_DEFAULT_MONITOR_MS 8000
+
+#define CW2015_AVERAGING_SAMPLES 3
+
+struct cw_battery {
+ struct i2c_client *client;
+ struct workqueue_struct *battery_workqueue;
+ struct delayed_work battery_delay_work;
+ struct regmap *regmap;
+ struct power_supply *rk_bat;
+ struct power_supply_battery_info battery;
+ u8 *bat_config_info;
+
+#ifdef CONFIG_PM
+ struct timespec64 suspend_time_before;
+ struct timespec64 after;
+ int suspend_resume_mark;
+#endif
+ int charger_mode;
+ int capacity;
+ int voltage;
+ int status;
+ int time_to_empty;
+ int alt;
+ u32 monitor_sec;
+ int bat_change;
+ int charge_count;
+ u8 alert_level;
+};
+
+#define PREFIX "cellwise,"
+
+#define cw_dbg(cw_bat, ...) dev_dbg(&(cw_bat)->client->dev, __VA_ARGS__)
+#define cw_info(cw_bat, ...) dev_info(&(cw_bat)->client->dev, __VA_ARGS__)
+#define cw_warn(cw_bat, ...) dev_warn(&(cw_bat)->client->dev, __VA_ARGS__)
+#define cw_err(cw_bat, ...) dev_err(&(cw_bat)->client->dev, __VA_ARGS__)
+
+static int cw_read(struct cw_battery *cw_bat, u8 reg, u8 *val)
+{
+ u32 tmp;
+ int ret;
+
+ ret = regmap_read(cw_bat->regmap, reg, &tmp);
+ *val = tmp;
+ return ret;
+}
+
+static int cw_write(struct cw_battery *cw_bat, u8 reg, const u8 val)
+{
+ return regmap_write(cw_bat->regmap, reg, val);
+}
+
+static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
+{
+ u8 reg_val[2];
+ int ret;
+
+ ret = regmap_raw_read(cw_bat->regmap, reg, reg_val, 2);
+ *val = (reg_val[0] << 8) + reg_val[1];
+ return ret;
+}
+
+static int cw_read_bulk(struct cw_battery *cw_bat, u8 reg, u8 *buf, size_t len)
+{
+ return regmap_raw_read(cw_bat->regmap, reg, buf, len);
+}
+
+static int cw_write_bulk(struct cw_battery *cw_bat, u8 reg, u8 const *buf,
+ size_t len)
+{
+ return regmap_raw_write(cw_bat->regmap, reg, buf, len);
+}
+
+int cw_update_config_info(struct cw_battery *cw_bat)
+{
+ int ret;
+ u8 reg_val;
+ u8 reset_val;
+
+ if (!cw_bat->bat_config_info) {
+ cw_err(cw_bat,
+ "No battery config info provided, can't update flash contents");
+ return -EINVAL;
+ }
+
+ /* make sure gauge is not in sleep mode */
+ ret = cw_read(cw_bat, CW2015_REG_MODE, ®_val);
+ if (ret < 0)
+ return ret;
+
+ reset_val = reg_val;
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ cw_err(cw_bat,
+ "Device is in sleep mode, can't update battery info");
+ return -EINVAL;
+ }
+
+ /* write new battery info */
+ ret = cw_write_bulk(cw_bat, CW2015_REG_BATINFO,
+ cw_bat->bat_config_info,
+ CW2015_SIZE_BATINFO);
+
+ if (ret < 0)
+ return ret;
+
+ reg_val |= CW2015_CONFIG_UPDATE_FLG; /* set UPDATE_FLAG */
+ reg_val &= ~CW2015_MASK_ATHD; /* clear alert level */
+ reg_val |= CW2015_ATHD(cw_bat->alert_level); /* set alert level */
+ ret = cw_write(cw_bat, CW2015_REG_CONFIG, reg_val);
+ if (ret < 0)
+ return ret;
+
+ /* reset */
+ reset_val &= ~(CW2015_MODE_RESTART);
+ reg_val = reset_val | CW2015_MODE_RESTART;
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reg_val);
+ if (ret < 0)
+ return ret;
+
+ msleep(20);
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reset_val);
+ if (ret < 0)
+ return ret;
+
+ cw_dbg(cw_bat, "Battery config updated");
+
+ return 0;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+ int ret;
+ int i;
+ u8 reg_val = CW2015_MODE_SLEEP;
+
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ reg_val = CW2015_MODE_NORMAL;
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reg_val);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = cw_read(cw_bat, CW2015_REG_CONFIG, ®_val);
+ if (ret < 0)
+ return ret;
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+ cw_dbg(cw_bat, "Setting new alert level");
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+ ret = cw_write(cw_bat, CW2015_REG_CONFIG, reg_val);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = cw_read(cw_bat, CW2015_REG_CONFIG, ®_val);
+ if (ret < 0)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ cw_dbg(cw_bat,
+ "Battery config not present, uploading battery config");
+ if (cw_bat->bat_config_info) {
+ ret = cw_update_config_info(cw_bat);
+ if (ret < 0) {
+ cw_err(cw_bat,
+ "Failed to upload battery info\n");
+ return ret;
+ }
+ } else {
+ cw_warn(cw_bat,
+ "Have no battery config for uploading, continuing without config");
+ }
+ } else if (cw_bat->bat_config_info) {
+ u8 bat_info[CW2015_SIZE_BATINFO];
+
+ ret = cw_read_bulk(cw_bat, CW2015_REG_BATINFO, bat_info,
+ CW2015_SIZE_BATINFO);
+ if (ret < 0)
+ return ret;
+
+ if (memcmp(bat_info, cw_bat->bat_config_info,
+ CW2015_SIZE_BATINFO)) {
+ cw_warn(cw_bat, "Replacing stored battery info");
+ ret = cw_update_config_info(cw_bat);
+ if (ret < 0)
+ return ret;
+ }
+ } else
+ cw_warn(cw_bat, "Can't check current battery config, no config provided");
+
+ for (i = 0; i < CW2015_READ_TRIES; i++) {
+ ret = cw_read(cw_bat, CW2015_REG_SOC, ®_val);
+ if (ret < 0)
+ return ret;
+ else if (reg_val <= 100) // SOC can't be more than 100 %
+ break;
+ msleep(120);
+ }
+
+ if (i >= CW2015_READ_TRIES) {
+ reg_val = CW2015_MODE_SLEEP;
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reg_val);
+ cw_err(cw_bat, "Invalid state of charge indication");
+ return -EIO;
+ }
+
+ cw_dbg(cw_bat, "Battery configured");
+ return 0;
+}
+
+static int cw_por(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned char reset_val;
+
+ reset_val = CW2015_MODE_SLEEP;
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reset_val);
+ if (ret < 0)
+ return ret;
+ reset_val = CW2015_MODE_NORMAL;
+ msleep(20);
+ ret = cw_write(cw_bat, CW2015_REG_MODE, reset_val);
+ if (ret < 0)
+ return ret;
+ ret = cw_init(cw_bat);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static int cw_get_capacity(struct cw_battery *cw_bat)
+{
+ int cw_capacity;
+ int ret;
+ u8 reg_val;
+
+ static int reset_loop;
+ static int charging_loop;
+ static int discharging_loop;
+ static int jump_flag;
+ static int charging_5_loop;
+ int sleep_cap;
+
+ ret = cw_read(cw_bat, CW2015_REG_SOC, ®_val);
+ if (ret < 0)
+ return ret;
+
+ cw_capacity = reg_val;
+
+ if ((cw_capacity < 0) || (cw_capacity > 100)) {
+ cw_err(cw_bat, "Invalid SoC, SoC = %d %%", cw_capacity);
+ reset_loop++;
+ if (reset_loop >
+ (CW2015_BATTERY_CAPACITY_ERROR / cw_bat->monitor_sec)) {
+ cw_por(cw_bat);
+ reset_loop = 0;
+ }
+ return cw_bat->capacity;
+ }
+ reset_loop = 0;
+
+ /* case 1 : aviod swing */
+ if (((cw_bat->charger_mode > 0) &&
+ (cw_capacity <= cw_bat->capacity - 1) &&
+ (cw_capacity > cw_bat->capacity - 9)) ||
+ ((cw_bat->charger_mode == 0) &&
+ (cw_capacity == (cw_bat->capacity + 1)))) {
+ if (!(cw_capacity == 0 && cw_bat->capacity <= 2))
+ cw_capacity = cw_bat->capacity;
+ }
+
+ /* case 2 : ensure battery reaches full state */
+ if ((cw_bat->charger_mode > 0) &&
+ (cw_capacity >= 95) && (cw_capacity <= cw_bat->capacity)) {
+ charging_loop++;
+ if (charging_loop >
+ (CW2015_BATTERY_UP_MAX_CHANGE / cw_bat->monitor_sec)) {
+ cw_capacity = (cw_bat->capacity + 1) <= 100 ?
+ (cw_bat->capacity + 1) : 100;
+ charging_loop = 0;
+ jump_flag = 1;
+ } else {
+ cw_capacity = cw_bat->capacity;
+ }
+ }
+
+ /* case 3 : prevent battery level from jumping to CW_BAT */
+ if ((cw_bat->charger_mode == 0) &&
+ (cw_capacity <= cw_bat->capacity) &&
+ (cw_capacity >= 90) && (jump_flag == 1)) {
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1) {
+ cw_bat->suspend_resume_mark = 0;
+ sleep_cap = (cw_bat->after.tv_sec +
+ discharging_loop *
+ (cw_bat->monitor_sec / 1000)) /
+ (CW2015_BATTERY_DOWN_MAX_CHANGE / 1000);
+ cw_dbg(cw_bat, "Estimated capacity lost during sleep: %d",
+ sleep_cap);
+
+ if (cw_capacity >= cw_bat->capacity - sleep_cap)
+ return cw_capacity;
+
+ if (!sleep_cap)
+ discharging_loop = discharging_loop +
+ 1 + cw_bat->after.tv_sec /
+ (cw_bat->monitor_sec / 1000);
+ else
+ discharging_loop = 0;
+ return cw_bat->capacity - sleep_cap;
+ }
+#endif
+ discharging_loop++;
+ if (discharging_loop >
+ (CW2015_BATTERY_DOWN_MAX_CHANGE / cw_bat->monitor_sec)) {
+ if (cw_capacity >= cw_bat->capacity - 1)
+ jump_flag = 0;
+ else
+ cw_capacity = cw_bat->capacity - 1;
+
+ discharging_loop = 0;
+ } else {
+ cw_capacity = cw_bat->capacity;
+ }
+ }
+
+ /* case 4 : reset gauge if stuck at 0% while charging */
+ if ((cw_bat->charger_mode > 0) && (cw_capacity == 0)) {
+ charging_5_loop++;
+ if (charging_5_loop >
+ CW2015_BATTERY_CHARGING_ZERO / cw_bat->monitor_sec) {
+ cw_por(cw_bat);
+ charging_5_loop = 0;
+ }
+ } else if (charging_5_loop != 0) {
+ charging_5_loop = 0;
+ }
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1)
+ cw_bat->suspend_resume_mark = 0;
+#endif
+ return cw_capacity;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+ int ret, i, voltage;
+ u16 reg_val;
+ u32 avg = 0;
+
+ for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
+ ret = cw_read_word(cw_bat, CW2015_REG_VCELL, ®_val);
+ if (ret < 0)
+ return ret;
+
+ avg += reg_val;
+ }
+ avg /= 3;
+
+ voltage = avg * 312 / 1024;
+
+ cw_dbg(cw_bat, "Read voltage: %d mV, raw=0x%04x\n", voltage, reg_val);
+ return voltage;
+}
+
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+ u16 value16;
+
+ ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
+ if (ret < 0)
+ return ret;
+
+ return value16 & CW2015_MASK_SOC;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+ int cw_charger_mode;
+
+ cw_charger_mode = power_supply_am_i_supplied(cw_bat->rk_bat);
+ if (cw_charger_mode < 0) {
+ cw_warn(cw_bat, "Failed to get supply state: %d",
+ cw_charger_mode);
+ } else if (cw_bat->charger_mode != cw_charger_mode) {
+ cw_bat->charger_mode = cw_charger_mode;
+ cw_bat->bat_change = 1;
+ if (cw_charger_mode)
+ cw_bat->charge_count++;
+ }
+}
+
+static void cw_update_capacity(struct cw_battery *cw_bat)
+{
+ int cw_capacity;
+
+ cw_capacity = cw_get_capacity(cw_bat);
+ if (cw_capacity < 0)
+ cw_err(cw_bat, "Failed to get SoC from gauge: %d", cw_capacity);
+ else if (cw_capacity > 100)
+ cw_err(cw_bat, "Got invalid SoC from gauge: %d %%",
+ cw_capacity);
+ else if (cw_bat->capacity != cw_capacity) {
+ cw_bat->capacity = cw_capacity;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_update_vol(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = cw_get_voltage(cw_bat);
+ if (ret < 0)
+ cw_err(cw_bat, "Failed to get voltage from gauge: %d",
+ ret);
+ else if (cw_bat->voltage != ret)
+ cw_bat->voltage = ret;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+ int status;
+
+ if (cw_bat->charger_mode > 0) {
+ if (cw_bat->capacity >= 100)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (cw_bat->status != status) {
+ cw_bat->status = status;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = cw_get_time_to_empty(cw_bat);
+ if (ret < 0)
+ cw_err(cw_bat, "Failed to get time to empty from gauge: %d",
+ ret);
+ else if (cw_bat->time_to_empty != ret) {
+ cw_bat->time_to_empty = ret;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+ struct delayed_work *delay_work;
+ struct cw_battery *cw_bat;
+ int ret;
+ u8 reg_val;
+ int i = 0;
+
+ delay_work = container_of(work, struct delayed_work, work);
+ cw_bat =
+ container_of(delay_work, struct cw_battery, battery_delay_work);
+
+ ret = cw_read(cw_bat, CW2015_REG_MODE, ®_val);
+ if (ret < 0) {
+ cw_err(cw_bat, "Failed to read mode from gauge: %d", ret);
+ } else {
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ for (i = 0; i < CW2015_RESET_TRIES; i++) {
+ if (cw_por(cw_bat) == 0)
+ break;
+ }
+ }
+ cw_update_capacity(cw_bat);
+ cw_update_vol(cw_bat);
+ cw_update_charge_status(cw_bat);
+ cw_update_status(cw_bat);
+ cw_update_time_to_empty(cw_bat);
+ }
+ cw_dbg(cw_bat, "charger_mode = %d", cw_bat->charger_mode);
+ cw_dbg(cw_bat, "status = %d", cw_bat->status);
+ cw_dbg(cw_bat, "capacity = %d", cw_bat->capacity);
+ cw_dbg(cw_bat, "voltage = %d", cw_bat->voltage);
+
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1)
+ cw_bat->suspend_resume_mark = 0;
+#endif
+
+ if (cw_bat->bat_change == 1) {
+ power_supply_changed(cw_bat->rk_bat);
+ cw_bat->bat_change = 0;
+ }
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work,
+ msecs_to_jiffies(cw_bat->monitor_sec));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+ return cw_bat->time_to_empty > 0 &&
+ cw_bat->time_to_empty < CW2015_MASK_SOC &&
+ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct cw_battery *cw_bat;
+
+ cw_bat = power_supply_get_drvdata(psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = cw_bat->capacity;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cw_bat->status;
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = cw_bat->voltage <= 0 ? 0 : 1;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cw_bat->voltage * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat))
+ val->intval = cw_bat->time_to_empty;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = cw_bat->charge_count;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ if (cw_bat->battery.charge_full_design_uah > 0)
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat) &&
+ cw_bat->battery.charge_full_design_uah > 0) {
+ // calculate remaining capacity
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ val->intval = val->intval * cw_bat->capacity / 100;
+
+ // estimate current based on time to empty (in minutes)
+ val->intval = 60 * val->intval / cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+ .name = "cw2015-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = cw_battery_properties,
+ .num_properties = ARRAY_SIZE(cw_battery_properties),
+ .get_property = cw_battery_get_property,
+};
+
+#ifdef CONFIG_OF
+static int cw2015_parse_dt(struct cw_battery *cw_bat)
+{
+ struct device *dev = &cw_bat->client->dev;
+ struct device_node *node = dev->of_node;
+ struct property *prop;
+ int length;
+ u32 value;
+ int ret;
+
+ if (!node)
+ return -ENODEV;
+
+ prop = of_find_property(node, PREFIX"bat-config-info", &length);
+ if (prop) {
+ if (length != CW2015_SIZE_BATINFO) {
+ cw_err(cw_bat, "bat-config-info must be %d bytes",
+ CW2015_SIZE_BATINFO);
+ return -EINVAL;
+ }
+
+ cw_bat->bat_config_info =
+ devm_kzalloc(dev, CW2015_SIZE_BATINFO, GFP_KERNEL);
+ if (!cw_bat->bat_config_info) {
+ cw_err(cw_bat,
+ "Failed to allocate memory for battery config info");
+ return -ENOMEM;
+ }
+
+ ret = of_property_read_u8_array(node, PREFIX"bat-config-info",
+ cw_bat->bat_config_info,
+ CW2015_SIZE_BATINFO);
+ if (ret < 0)
+ return ret;
+ } else
+ cw_warn(cw_bat,
+ "No bat-config-info found, rolling with current flash contents");
+
+ cw_bat->monitor_sec = CW2015_DEFAULT_MONITOR_MS;
+
+ ret = of_property_read_u32(node, PREFIX"monitor-interval-ms", &value);
+ if (ret >= 0) {
+ cw_dbg(cw_bat, "Overriding default monitor-interval with %u ms",
+ value);
+ cw_bat->monitor_sec = value;
+ }
+
+ return 0;
+}
+#else
+static int cw2015_parse_dt(struct cw_battery *cw_bat)
+{
+ return -ENODEV;
+}
+#endif
+
+static const struct regmap_range regmap_ranges_rd_yes[] = {
+ regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO, CW2015_REG_BATINFO +
+ CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_rd_table = {
+ .yes_ranges = regmap_ranges_rd_yes,
+ .n_yes_ranges = 4,
+};
+
+static const struct regmap_range regmap_ranges_wr_yes[] = {
+ regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO, CW2015_REG_BATINFO +
+ CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_wr_table = {
+ .yes_ranges = regmap_ranges_wr_yes,
+ .n_yes_ranges = 3,
+};
+
+static const struct regmap_range regmap_ranges_vol_yes[] = {
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
+};
+
+static const struct regmap_access_table regmap_vol_table = {
+ .yes_ranges = regmap_ranges_vol_yes,
+ .n_yes_ranges = 1,
+};
+
+static const struct regmap_config cw2015_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = ®map_rd_table,
+ .wr_table = ®map_wr_table,
+ .volatile_table = ®map_vol_table,
+ .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
+};
+
+static int cw_bat_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct cw_battery *cw_bat;
+ struct power_supply_config psy_cfg = {0};
+
+ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+ if (!cw_bat)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, cw_bat);
+ cw_bat->client = client;
+
+ ret = cw2015_parse_dt(cw_bat);
+ if (ret < 0) {
+ cw_err(cw_bat, "Failed to parse cw2015 dt data");
+ return ret;
+ }
+
+ cw_bat->capacity = 1;
+ cw_bat->voltage = 0;
+ cw_bat->status = 0;
+ cw_bat->suspend_resume_mark = 0;
+ cw_bat->charger_mode = 0;
+ cw_bat->bat_change = 0;
+
+ cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
+ if (IS_ERR(cw_bat->regmap)) {
+ cw_err(cw_bat, "Failed to allocate regmap: %ld",
+ PTR_ERR(cw_bat->regmap));
+ return PTR_ERR(cw_bat->regmap);
+ }
+
+ ret = cw_init(cw_bat);
+ if (ret) {
+ cw_err(cw_bat, "Init failed: %d", ret);
+ return ret;
+ }
+
+ psy_cfg.drv_data = cw_bat;
+ psy_cfg.of_node = client->dev.of_node;
+
+ cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+ &cw2015_bat_desc, &psy_cfg);
+ if (IS_ERR(cw_bat->rk_bat)) {
+ cw_err(cw_bat, "Failed to register power supply");
+ return -1;
+ }
+
+ ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ if (ret) {
+ cw_warn(cw_bat,
+ "No monitored battery, some properties will be missing");
+ }
+
+ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+
+ cw_dbg(cw_bat, "cw2015/cw2013 driver probe success");
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cw_bat_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ ktime_get_boottime_ts64(&cw_bat->suspend_time_before);
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static int cw_bat_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cw_bat->suspend_resume_mark = 1;
+ ktime_get_boottime_ts64(&cw_bat->after);
+ cw_bat->after = timespec64_sub(cw_bat->after,
+ cw_bat->suspend_time_before);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(2));
+ return 0;
+}
+
+static const struct dev_pm_ops cw_bat_pm_ops = {
+ .suspend = cw_bat_suspend,
+ .resume = cw_bat_resume,
+};
+#endif
+
+static int cw_bat_remove(struct i2c_client *client)
+{
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cw_dbg(cw_bat, "Removing device");
+ cancel_delayed_work(&cw_bat->battery_delay_work);
+ power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ return 0;
+}
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+ { "cw2015", 0 },
+ {}
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+ { .compatible = PREFIX"cw2015" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+ .driver = {
+ .name = "cw2015",
+#ifdef CONFIG_PM
+ .pm = &cw_bat_pm_ops,
+#endif
+ },
+ .probe = cw_bat_probe,
+ .remove = cw_bat_remove,
+ .id_table = cw_bat_id_table,
+};
+
+module_i2c_driver(cw_bat_driver);
+
+MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
This patch adds a driver for the CellWise cw2015 fuel gauge. The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- MAINTAINERS | 6 + drivers/power/supply/Kconfig | 6 + drivers/power/supply/Makefile | 1 + drivers/power/supply/cw2015_battery.c | 891 ++++++++++++++++++++++++++ 4 files changed, 904 insertions(+) create mode 100644 drivers/power/supply/cw2015_battery.c