diff mbox series

[v10,3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers

Message ID 20200506080242.18623-3-hyunki00.koo@samsung.com
State Superseded
Headers show
Series None | expand

Commit Message

Hyunki Koo May 6, 2020, 8:02 a.m. UTC
Support 32-bit access for the TX/RX hold registers UTXH and URXH.

This is required for some newer SoCs.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested on Odroid HC1 (Exynos5422):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 5 deletions(-)

Comments

Tudor Ambarus Nov. 30, 2023, 10:19 a.m. UTC | #1
I'm trying my luck on a 3 year old patch, fingers crossed :).

On 5/6/20 09:02, Hyunki Koo wrote:

Hi, Hyunki!

> Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> 
> This is required for some newer SoCs.

Is the 32-bit access mandatory for the newer SoCs? I'm asking because I
see a SError Interrupt when using 8-bit accesses on gs101 (pixel6). Can
you confirm if gs101 USI UART is restricted to only 32 bit data width
accesses?

If 32-bit accesses are mandatory, we should impose this restriction so
that we avoid crashing the kernel on wrong user configuration. I have
some patches ready, waiting just for a confirmation.

Below is the crash that I see. Thanks!

[    1.215459] SError Interrupt on CPU6, code 0x00000000be000411 -- SError
[    1.215464] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
6.6.0-rc1-00021-g31831088e862-dirty #88
[    1.215468] Hardware name: Oriole DVT (DT)
[    1.215470] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[    1.215473] pc : s3c24xx_serial_console_putchar+0x1c/0x90
[    1.215487] lr : uart_console_write+0x50/0x6c
[    1.215491] sp : ffff80008007b6c0
[    1.215492] x29: ffff80008007b6c0 x28: 0000000000000000 x27:
ffffc0ec2c855900
[    1.215498] x26: ffffc0ec2bdee008 x25: 0000000000000000 x24:
ffffc0ec2c529a40
[    1.215501] x23: ffff80008007b830 x22: ffffc0ec2c9578b9 x21:
ffffc0ec2c9b8330
[    1.215504] x20: ffffc0ec2aa0d684 x19: ffffc0ec2c95788a x18:
0000000000000006
[    1.215507] x17: 0000000000000000 x16: 0000000000000001 x15:
ffff80008007b460
[    1.215510] x14: 0000000000000000 x13: 64656c62616e6520 x12:
5d30434153797474
[    1.215513] x11: 5b20656c6f736e6f x10: 63203a6b746e6972 x9 :
656c62616e65205d
[    1.215515] x8 : 304341537974745b x7 : 205d303534353132 x6 :
322e31202020205b
[    1.215518] x5 : ffffc0ec2c9b82f0 x4 : ffffc0ec2b5bc1c0 x3 :
ffff800080061000
[    1.215521] x2 : 0000000000000111 x1 : 0000000000000020 x0 :
ffffc0ec2c9b8330
[    1.215526] Kernel panic - not syncing: Asynchronous SError Interrupt
[    1.215528] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
6.6.0-rc1-00021-g31831088e862-dirty #88
[    1.215531] Hardware name: Oriole DVT (DT)
[    1.215532] Call trace:
[    1.215533]  dump_backtrace+0x90/0xe8
[    1.215542]  show_stack+0x18/0x24
[    1.215547]  dump_stack_lvl+0x48/0x60
[    1.215555]  dump_stack+0x18/0x24
[    1.215559]  panic+0x31c/0x378
[    1.215565]  nmi_panic+0x8c/0x90
[    1.215569]  arm64_serror_panic+0x6c/0x78
[    1.215571]  do_serror+0x3c/0x70
[    1.215574]  el1h_64_error_handler+0x30/0x48
[    1.215581]  el1h_64_error+0x64/0x68
[    1.215583]  s3c24xx_serial_console_putchar+0x1c/0x90
[    1.215588]  s3c24xx_serial_console_write+0xb8/0xfc
[    1.215593]  console_flush_all.isra.0+0x168/0x3ac
[    1.215600]  console_unlock+0x58/0xdc
[    1.215604]  vprintk_emit+0x1a8/0x2b0
[    1.215608]  vprintk_default+0x38/0x44
[    1.215613]  vprintk+0xbc/0xd0
[    1.215617]  _printk+0x5c/0x84
[    1.215621]  register_console+0x2a0/0x400
[    1.215625]  serial_core_register_port+0x61c/0x658
[    1.215630]  serial_ctrl_register_port+0x10/0x1c
[    1.215634]  uart_add_one_port+0x10/0x1c
[    1.215639]  s3c24xx_serial_probe+0x360/0x6fc
[    1.215644]  platform_probe+0x68/0xc8
[    1.215650]  really_probe+0x148/0x2b0
[    1.215653]  __driver_probe_device+0x78/0x12c
[    1.215656]  driver_probe_device+0x3c/0x15c
[    1.215658]  __driver_attach+0x90/0x19c
[    1.215661]  bus_for_each_dev+0x78/0xd4
[    1.215668]  driver_attach+0x24/0x30
[    1.215670]  bus_add_driver+0xe8/0x1f8
[    1.215672]  driver_register+0x5c/0x124
[    1.215675]  __platform_driver_register+0x28/0x34
[    1.215678]  samsung_serial_init+0x30/0x8c
[    1.215687]  do_one_initcall+0x7c/0x1c0
[    1.215689]  kernel_init_freeable+0x1bc/0x284
[    1.215695]  kernel_init+0x24/0x1dc
[    1.215697]  ret_from_fork+0x10/0x20
[    1.215701] SMP: stopping secondary CPUs
[    1.215708] Kernel Offset: 0x40ebaa200000 from 0xffff800080000000
[    1.215710] PHYS_OFFSET: 0xffffc18980000000
[    1.215711] CPU features: 0xc0000001,70020143,1000720b
[    1.215714] Memory Limit: none
> 
> Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Tested on Odroid HC1 (Exynos5422):
> Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
>  1 file changed, 57 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 326b0164609c..6ef614d8648c 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -154,10 +154,33 @@ struct s3c24xx_uart_port {
>  #define portaddrl(port, reg) \
>  	((unsigned long *)(unsigned long)((port)->membase + (reg)))
>  
> -#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
> +static u32 rd_reg(struct uart_port *port, u32 reg)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		return readb_relaxed(portaddr(port, reg));
> +	case UPIO_MEM32:
> +		return readl_relaxed(portaddr(port, reg));
> +	default:
> +		return 0;
> +	}
> +	return 0;
> +}
> +
>  #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
>  
> -#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		writeb_relaxed(val, portaddr(port, reg));
> +		break;
> +	case UPIO_MEM32:
> +		writel_relaxed(val, portaddr(port, reg));
> +		break;
> +	}
> +}
> +
>  #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
>  
>  /* Byte-order aware bit setting/clearing functions. */
> @@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
>  	struct device_node *np = pdev->dev.of_node;
>  	struct s3c24xx_uart_port *ourport;
>  	int index = probe_index;
> -	int ret;
> +	int ret, prop = 0;
>  
>  	if (np) {
>  		ret = of_alias_get_id(np, "serial");
> @@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
>  			dev_get_platdata(&pdev->dev) :
>  			ourport->drv_data->def_cfg;
>  
> -	if (np)
> +	if (np) {
>  		of_property_read_u32(np,
>  			"samsung,uart-fifosize", &ourport->port.fifosize);
>  
> +		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> +			switch (prop) {
> +			case 1:
> +				ourport->port.iotype = UPIO_MEM;
> +				break;
> +			case 4:
> +				ourport->port.iotype = UPIO_MEM32;
> +				break;
> +			default:
> +				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> +						prop);
> +				ret = -EINVAL;
> +				break;
> +			}
> +		}
> +	}
> +
>  	if (ourport->drv_data->fifosize[index])
>  		ourport->port.fifosize = ourport->drv_data->fifosize[index];
>  	else if (ourport->info->fifosize)
> @@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver);
>   * Early console.
>   */
>  
> +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		writeb(val, portaddr(port, reg));
> +		break;
> +	case UPIO_MEM32:
> +		writel(val, portaddr(port, reg));
> +		break;
> +	}
> +}
> +
>  struct samsung_early_console_data {
>  	u32 txfull_mask;
>  };
> @@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
>  	else
>  		samsung_early_busyuart(port);
>  
> -	writeb(c, port->membase + S3C2410_UTXH);
> +	wr_reg_barrier(port, S3C2410_UTXH, c);
>  }
>  
>  static void samsung_early_write(struct console *con, const char *s,
Youngmin Nam Nov. 30, 2023, 11:20 a.m. UTC | #2
On Thu, Nov 30, 2023 at 10:19:40AM +0000, Tudor Ambarus wrote:
> I'm trying my luck on a 3 year old patch, fingers crossed :).
> 
> On 5/6/20 09:02, Hyunki Koo wrote:
> 
> Hi, Hyunki!
> 
> > Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> > 
> > This is required for some newer SoCs.
> 
> Is the 32-bit access mandatory for the newer SoCs? I'm asking because I
> see a SError Interrupt when using 8-bit accesses on gs101 (pixel6). Can
> you confirm if gs101 USI UART is restricted to only 32 bit data width
> accesses?
> 
> If 32-bit accesses are mandatory, we should impose this restriction so
> that we avoid crashing the kernel on wrong user configuration. I have
> some patches ready, waiting just for a confirmation.

Hi.

Yes, some newer exynos SoCs allow only 32bit access to UART TX / RX register.
This feature is related with SoC Bus architecture so it should be controlled by "reg-io-width" in
UART device tree.

Thanks.

> 
> Below is the crash that I see. Thanks!
> 
> [    1.215459] SError Interrupt on CPU6, code 0x00000000be000411 -- SError
> [    1.215464] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
> 6.6.0-rc1-00021-g31831088e862-dirty #88
> [    1.215468] Hardware name: Oriole DVT (DT)
> [    1.215470] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [    1.215473] pc : s3c24xx_serial_console_putchar+0x1c/0x90
> [    1.215487] lr : uart_console_write+0x50/0x6c
> [    1.215491] sp : ffff80008007b6c0
> [    1.215492] x29: ffff80008007b6c0 x28: 0000000000000000 x27:
> ffffc0ec2c855900
> [    1.215498] x26: ffffc0ec2bdee008 x25: 0000000000000000 x24:
> ffffc0ec2c529a40
> [    1.215501] x23: ffff80008007b830 x22: ffffc0ec2c9578b9 x21:
> ffffc0ec2c9b8330
> [    1.215504] x20: ffffc0ec2aa0d684 x19: ffffc0ec2c95788a x18:
> 0000000000000006
> [    1.215507] x17: 0000000000000000 x16: 0000000000000001 x15:
> ffff80008007b460
> [    1.215510] x14: 0000000000000000 x13: 64656c62616e6520 x12:
> 5d30434153797474
> [    1.215513] x11: 5b20656c6f736e6f x10: 63203a6b746e6972 x9 :
> 656c62616e65205d
> [    1.215515] x8 : 304341537974745b x7 : 205d303534353132 x6 :
> 322e31202020205b
> [    1.215518] x5 : ffffc0ec2c9b82f0 x4 : ffffc0ec2b5bc1c0 x3 :
> ffff800080061000
> [    1.215521] x2 : 0000000000000111 x1 : 0000000000000020 x0 :
> ffffc0ec2c9b8330
> [    1.215526] Kernel panic - not syncing: Asynchronous SError Interrupt
> [    1.215528] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
> 6.6.0-rc1-00021-g31831088e862-dirty #88
> [    1.215531] Hardware name: Oriole DVT (DT)
> [    1.215532] Call trace:
> [    1.215533]  dump_backtrace+0x90/0xe8
> [    1.215542]  show_stack+0x18/0x24
> [    1.215547]  dump_stack_lvl+0x48/0x60
> [    1.215555]  dump_stack+0x18/0x24
> [    1.215559]  panic+0x31c/0x378
> [    1.215565]  nmi_panic+0x8c/0x90
> [    1.215569]  arm64_serror_panic+0x6c/0x78
> [    1.215571]  do_serror+0x3c/0x70
> [    1.215574]  el1h_64_error_handler+0x30/0x48
> [    1.215581]  el1h_64_error+0x64/0x68
> [    1.215583]  s3c24xx_serial_console_putchar+0x1c/0x90
> [    1.215588]  s3c24xx_serial_console_write+0xb8/0xfc
> [    1.215593]  console_flush_all.isra.0+0x168/0x3ac
> [    1.215600]  console_unlock+0x58/0xdc
> [    1.215604]  vprintk_emit+0x1a8/0x2b0
> [    1.215608]  vprintk_default+0x38/0x44
> [    1.215613]  vprintk+0xbc/0xd0
> [    1.215617]  _printk+0x5c/0x84
> [    1.215621]  register_console+0x2a0/0x400
> [    1.215625]  serial_core_register_port+0x61c/0x658
> [    1.215630]  serial_ctrl_register_port+0x10/0x1c
> [    1.215634]  uart_add_one_port+0x10/0x1c
> [    1.215639]  s3c24xx_serial_probe+0x360/0x6fc
> [    1.215644]  platform_probe+0x68/0xc8
> [    1.215650]  really_probe+0x148/0x2b0
> [    1.215653]  __driver_probe_device+0x78/0x12c
> [    1.215656]  driver_probe_device+0x3c/0x15c
> [    1.215658]  __driver_attach+0x90/0x19c
> [    1.215661]  bus_for_each_dev+0x78/0xd4
> [    1.215668]  driver_attach+0x24/0x30
> [    1.215670]  bus_add_driver+0xe8/0x1f8
> [    1.215672]  driver_register+0x5c/0x124
> [    1.215675]  __platform_driver_register+0x28/0x34
> [    1.215678]  samsung_serial_init+0x30/0x8c
> [    1.215687]  do_one_initcall+0x7c/0x1c0
> [    1.215689]  kernel_init_freeable+0x1bc/0x284
> [    1.215695]  kernel_init+0x24/0x1dc
> [    1.215697]  ret_from_fork+0x10/0x20
> [    1.215701] SMP: stopping secondary CPUs
> [    1.215708] Kernel Offset: 0x40ebaa200000 from 0xffff800080000000
> [    1.215710] PHYS_OFFSET: 0xffffc18980000000
> [    1.215711] CPU features: 0xc0000001,70020143,1000720b
> [    1.215714] Memory Limit: none
> > 
> > Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> > Tested on Odroid HC1 (Exynos5422):
> > Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
> >  1 file changed, 57 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> > index 326b0164609c..6ef614d8648c 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -154,10 +154,33 @@ struct s3c24xx_uart_port {
> >  #define portaddrl(port, reg) \
> >  	((unsigned long *)(unsigned long)((port)->membase + (reg)))
> >  
> > -#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
> > +static u32 rd_reg(struct uart_port *port, u32 reg)
> > +{
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		return readb_relaxed(portaddr(port, reg));
> > +	case UPIO_MEM32:
> > +		return readl_relaxed(portaddr(port, reg));
> > +	default:
> > +		return 0;
> > +	}
> > +	return 0;
> > +}
> > +
> >  #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
> >  
> > -#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> > +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> > +{
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		writeb_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	case UPIO_MEM32:
> > +		writel_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	}
> > +}
> > +
> >  #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
> >  
> >  /* Byte-order aware bit setting/clearing functions. */
> > @@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> >  	struct device_node *np = pdev->dev.of_node;
> >  	struct s3c24xx_uart_port *ourport;
> >  	int index = probe_index;
> > -	int ret;
> > +	int ret, prop = 0;
> >  
> >  	if (np) {
> >  		ret = of_alias_get_id(np, "serial");
> > @@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> >  			dev_get_platdata(&pdev->dev) :
> >  			ourport->drv_data->def_cfg;
> >  
> > -	if (np)
> > +	if (np) {
> >  		of_property_read_u32(np,
> >  			"samsung,uart-fifosize", &ourport->port.fifosize);
> >  
> > +		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> > +			switch (prop) {
> > +			case 1:
> > +				ourport->port.iotype = UPIO_MEM;
> > +				break;
> > +			case 4:
> > +				ourport->port.iotype = UPIO_MEM32;
> > +				break;
> > +			default:
> > +				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> > +						prop);
> > +				ret = -EINVAL;
> > +				break;
> > +			}
> > +		}
> > +	}
> > +
> >  	if (ourport->drv_data->fifosize[index])
> >  		ourport->port.fifosize = ourport->drv_data->fifosize[index];
> >  	else if (ourport->info->fifosize)
> > @@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver);
> >   * Early console.
> >   */
> >  
> > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> > +{
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		writeb(val, portaddr(port, reg));
> > +		break;
> > +	case UPIO_MEM32:
> > +		writel(val, portaddr(port, reg));
> > +		break;
> > +	}
> > +}
> > +
> >  struct samsung_early_console_data {
> >  	u32 txfull_mask;
> >  };
> > @@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
> >  	else
> >  		samsung_early_busyuart(port);
> >  
> > -	writeb(c, port->membase + S3C2410_UTXH);
> > +	wr_reg_barrier(port, S3C2410_UTXH, c);
> >  }
> >  
> >  static void samsung_early_write(struct console *con, const char *s,
> 
>
diff mbox series

Patch

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 326b0164609c..6ef614d8648c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,10 +154,33 @@  struct s3c24xx_uart_port {
 #define portaddrl(port, reg) \
 	((unsigned long *)(unsigned long)((port)->membase + (reg)))
 
-#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
+static u32 rd_reg(struct uart_port *port, u32 reg)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		return readb_relaxed(portaddr(port, reg));
+	case UPIO_MEM32:
+		return readl_relaxed(portaddr(port, reg));
+	default:
+		return 0;
+	}
+	return 0;
+}
+
 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
 
-#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb_relaxed(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel_relaxed(val, portaddr(port, reg));
+		break;
+	}
+}
+
 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
 
 /* Byte-order aware bit setting/clearing functions. */
@@ -1974,7 +1997,7 @@  static int s3c24xx_serial_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct s3c24xx_uart_port *ourport;
 	int index = probe_index;
-	int ret;
+	int ret, prop = 0;
 
 	if (np) {
 		ret = of_alias_get_id(np, "serial");
@@ -2000,10 +2023,27 @@  static int s3c24xx_serial_probe(struct platform_device *pdev)
 			dev_get_platdata(&pdev->dev) :
 			ourport->drv_data->def_cfg;
 
-	if (np)
+	if (np) {
 		of_property_read_u32(np,
 			"samsung,uart-fifosize", &ourport->port.fifosize);
 
+		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+			switch (prop) {
+			case 1:
+				ourport->port.iotype = UPIO_MEM;
+				break;
+			case 4:
+				ourport->port.iotype = UPIO_MEM32;
+				break;
+			default:
+				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
+						prop);
+				ret = -EINVAL;
+				break;
+			}
+		}
+	}
+
 	if (ourport->drv_data->fifosize[index])
 		ourport->port.fifosize = ourport->drv_data->fifosize[index];
 	else if (ourport->info->fifosize)
@@ -2587,6 +2627,18 @@  module_platform_driver(samsung_serial_driver);
  * Early console.
  */
 
+static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel(val, portaddr(port, reg));
+		break;
+	}
+}
+
 struct samsung_early_console_data {
 	u32 txfull_mask;
 };
@@ -2612,7 +2664,7 @@  static void samsung_early_putc(struct uart_port *port, int c)
 	else
 		samsung_early_busyuart(port);
 
-	writeb(c, port->membase + S3C2410_UTXH);
+	wr_reg_barrier(port, S3C2410_UTXH, c);
 }
 
 static void samsung_early_write(struct console *con, const char *s,