[RFC] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC

Message ID 20200615122609.71884-1-m.shams@samsung.com
State New
Headers show
Series
  • [RFC] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
Related show

Commit Message

Tamseel Shams June 15, 2020, 12:26 p.m.
In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following warning:
"IRQ index 1 not found" on recent platforms.

This patch re-factors the IRQ resources handling for
each platform and hence fixing the above warnings seen
on some platforms.

Signed-off-by: Tamseel Shams <m.shams@samsung.com>
---
 drivers/tty/serial/samsung_tty.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

Patch

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 6ef614d8648c..078dcb3e316f 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -60,6 +60,7 @@  struct s3c24xx_uart_info {
 	char			*name;
 	unsigned int		type;
 	unsigned int		fifosize;
+	unsigned int		irq_cnt;
 	unsigned long		rx_fifomask;
 	unsigned long		rx_fifoshift;
 	unsigned long		rx_fifofull;
@@ -1908,12 +1909,17 @@  static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	else {
 		port->irq = ret;
 		ourport->rx_irq = ret;
-		ourport->tx_irq = ret + 1;
+		if (ourport->info->irq_cnt == 1)
+			ourport->tx_irq = ret;
+		else
+			ourport->tx_irq = ret + 1;
 	}
 
-	ret = platform_get_irq(platdev, 1);
-	if (ret > 0)
-		ourport->tx_irq = ret;
+	if (ourport->info->irq_cnt != 1) {
+		ret = platform_get_irq(platdev, 1);
+		if (ret > 0)
+			ourport->tx_irq = ret;
+	}
 	/*
 	 * DMA is currently supported only on DT platforms, if DMA properties
 	 * are specified.
@@ -2387,6 +2393,7 @@  static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
 		.name		= "Samsung S3C2410 UART",
 		.type		= PORT_S3C2410,
 		.fifosize	= 16,
+		.irq_cnt	= 2,
 		.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
 		.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
 		.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
@@ -2414,6 +2421,7 @@  static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
 		.name		= "Samsung S3C2412 UART",
 		.type		= PORT_S3C2412,
 		.fifosize	= 64,
+		.irq_cnt	= 2,
 		.has_divslot	= 1,
 		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
@@ -2443,6 +2451,7 @@  static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
 		.name		= "Samsung S3C2440 UART",
 		.type		= PORT_S3C2440,
 		.fifosize	= 64,
+		.irq_cnt	= 2,
 		.has_divslot	= 1,
 		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
@@ -2471,6 +2480,7 @@  static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
 		.name		= "Samsung S3C6400 UART",
 		.type		= PORT_S3C6400,
 		.fifosize	= 64,
+		.irq_cnt	= 1,
 		.has_divslot	= 1,
 		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
@@ -2498,6 +2508,7 @@  static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 	.info = &(struct s3c24xx_uart_info) {
 		.name		= "Samsung S5PV210 UART",
 		.type		= PORT_S3C6400,
+		.irq_cnt	= 1,
 		.has_divslot	= 1,
 		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
 		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
@@ -2526,6 +2537,7 @@  static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 	.info = &(struct s3c24xx_uart_info) {			\
 		.name		= "Samsung Exynos UART",	\
 		.type		= PORT_S3C6400,			\
+		.irq_cnt	= 1,				\
 		.has_divslot	= 1,				\
 		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
 		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\