[V6,4/7] spi: spi-geni-qcom: Add interconnect support

Message ID 1590049764-20912-5-git-send-email-akashast@codeaurora.org
State New
Headers show
Series
  • [V6,1/7] soc: qcom: geni: Support for ICC voting
Related show

Commit Message

Akash Asthana May 21, 2020, 8:29 a.m.
Get the interconnect paths for SPI based Serial Engine device
and vote according to the current bus speed of the driver.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
---
Changes in V2:
 - As per Bjorn's comment, removed se == NULL check from geni_spi_icc_get
 - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
 - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
   path handle
 - As per Matthias comment, added error handling for icc_set_bw call

Changes in V3:
 - As per Matthias's comment, use helper ICC function from geni-se driver.

Changes in V4:
 - Move peak_bw guess as twice of avg_bw if nothing mentioned explicitly
   to ICC core.

Changes in V5:
 - Use icc_enable/disable in power on/off call.
 - Save some non-zero avg/peak value to ICC core by calling geni_icc_set_bw
   from probe so that when resume/icc_enable is called NOC are running at
   some non-zero value. No need to call icc_disable after BW vote because
   device will resume and suspend before probe return and will leave ICC in
   disabled state.

Changes in V6:
 - No change

 drivers/spi/spi-geni-qcom.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index c397242..cc637d2 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -234,6 +234,13 @@  static int setup_fifo_params(struct spi_device *spi_slv,
 		return ret;
 	}
 
+	/* Set BW quota for CPU as driver supports FIFO mode only. */
+	geni_icc_bw_init(&se->icc_paths[CPU_TO_GENI],
+				Bps_to_icc(mas->cur_speed_hz), 0);
+	ret = geni_icc_set_bw(se);
+	if (ret)
+		return ret;
+
 	clk_sel = idx & CLK_SEL_MSK;
 	m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
 	spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
@@ -578,6 +585,18 @@  static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_enable(dev);
 
+	ret = geni_icc_get(&mas->se, NULL);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+	/* Set the bus quota to a reasonable value for register access */
+	geni_icc_bw_init(&mas->se.icc_paths[GENI_TO_CORE],
+			Bps_to_icc(CORE_2X_50_MHZ), 0);
+	geni_icc_bw_init(&mas->se.icc_paths[CPU_TO_GENI], GENI_DEFAULT_BW, 0);
+
+	ret = geni_icc_set_bw(&mas->se);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+
 	ret = spi_geni_init(mas);
 	if (ret)
 		goto spi_geni_probe_runtime_disable;
@@ -616,14 +635,24 @@  static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	ret = geni_se_resources_off(&mas->se);
+	if (ret)
+		return ret;
 
-	return geni_se_resources_off(&mas->se);
+	return geni_icc_disable(&mas->se);
 }
 
 static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	ret = geni_icc_enable(&mas->se);
+	if (ret)
+		return ret;
 
 	return geni_se_resources_on(&mas->se);
 }