diff mbox series

spi: spi-geni-qcom: Don't set the cs if it was already right

Message ID 20200626151946.1.I06134fd669bf91fd387dc6ecfe21d44c202bd412@changeid
State Accepted
Commit 638d8488ae00d2e5dd5033804e82b458d3cf85b1
Headers show
Series spi: spi-geni-qcom: Don't set the cs if it was already right | expand

Commit Message

Doug Anderson June 26, 2020, 10:19 p.m. UTC 
Setting the chip select on the Qualcomm geni SPI controller isn't
exactly cheap.  Let's cache the current setting and avoid setting the
chip select if it's already right.

Using "flashrom" to read or write the EC firmware on a Chromebook
shows roughly a 25% reduction in interrupts and a 15% speedup.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/spi/spi-geni-qcom.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 5b1dca1fff79..e99a9d57449f 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -79,6 +79,7 @@  struct spi_geni_master {
 	unsigned int oversampling;
 	spinlock_t lock;
 	int irq;
+	bool cs_flag;
 };
 
 static int get_spi_clk_cfg(unsigned int speed_hz,
@@ -146,10 +147,15 @@  static void spi_geni_set_cs(struct spi_device *slv, bool set_flag)
 	struct geni_se *se = &mas->se;
 	unsigned long time_left;
 
-	pm_runtime_get_sync(mas->dev);
 	if (!(slv->mode & SPI_CS_HIGH))
 		set_flag = !set_flag;
 
+	if (set_flag == mas->cs_flag)
+		return;
+
+	mas->cs_flag = set_flag;
+
+	pm_runtime_get_sync(mas->dev);
 	spin_lock_irq(&mas->lock);
 	reinit_completion(&mas->cs_done);
 	if (set_flag)