@@ -178,11 +178,18 @@ KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: When new NVM image is written to the non-active NVM
area (through non_activeX NVMem device), the
- authentication procedure is started by writing 1 to
- this file. If everything goes well, the device is
+ authentication procedure is started by writing to
+ this file.
+ If everything goes well, the device is
restarted with the new NVM firmware. If the image
verification fails an error code is returned instead.
+ This file will accept writing values "1" or "2"
+ - Writing "1" will flush the image to the storage
+ area and authenticate the image in one action.
+ - Writing "2" will only flush the image to the storage
+ area.
+
When read holds status of the last authentication
operation if an error occurred during the process. This
is directly the status value from the DMA configuration
@@ -27,6 +27,11 @@
#define NVM_MIN_SIZE SZ_32K
#define NVM_MAX_SIZE SZ_512K
+enum nvm_write_ops {
+ WRITE_AND_AUTHENTICATE = 1,
+ WRITE_ONLY = 2,
+};
+
static DEFINE_IDA(nvm_ida);
struct nvm_auth_status {
@@ -164,8 +169,12 @@ static int nvm_validate_and_write(struct tb_switch *sw)
}
if (tb_switch_is_usb4(sw))
- return usb4_switch_nvm_write(sw, 0, buf, image_size);
- return dma_port_flash_write(sw->dma_port, 0, buf, image_size);
+ ret = usb4_switch_nvm_write(sw, 0, buf, image_size);
+ else
+ ret = dma_port_flash_write(sw->dma_port, 0, buf, image_size);
+ if (!ret)
+ sw->nvm->flushed = true;
+ return ret;
}
static int nvm_authenticate_host_dma_port(struct tb_switch *sw)
@@ -371,6 +380,7 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
}
}
+ sw->nvm->flushed = false;
sw->nvm->buf_data_size = offset + bytes;
memcpy(sw->nvm->buf + offset, val, bytes);
@@ -1536,7 +1546,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct tb_switch *sw = tb_to_switch(dev);
- bool val;
+ int val;
int ret;
pm_runtime_get_sync(&sw->dev);
@@ -1552,25 +1562,28 @@ static ssize_t nvm_authenticate_store(struct device *dev,
goto exit_unlock;
}
- ret = kstrtobool(buf, &val);
+ ret = kstrtoint(buf, 10, &val);
if (ret)
goto exit_unlock;
/* Always clear the authentication status */
nvm_clear_auth_status(sw);
- if (val) {
- if (!sw->nvm->buf) {
- ret = -EINVAL;
- goto exit_unlock;
- }
-
- ret = nvm_validate_and_write(sw);
- if (ret)
- goto exit_unlock;
+ if (val > 0) {
+ if (!sw->nvm->flushed) {
+ if (!sw->nvm->buf) {
+ ret = -EINVAL;
+ goto exit_unlock;
+ }
- sw->nvm->authenticating = true;
- ret = nvm_authenticate(sw);
+ ret = nvm_validate_and_write(sw);
+ if (ret || val == WRITE_ONLY)
+ goto exit_unlock;
+ }
+ if (val == WRITE_AND_AUTHENTICATE) {
+ sw->nvm->authenticating = true;
+ ret = nvm_authenticate(sw);
+ }
}
exit_unlock:
@@ -40,6 +40,7 @@ struct tb_switch_nvm {
void *buf;
size_t buf_data_size;
bool authenticating;
+ bool flushed;
};
#define TB_SWITCH_KEY_SIZE 32
This allows userspace to have a shorter period of time that the device is unusable and to call it at a more convenient time. For example flushing the image may happen while the user is using the machine and authenticating/rebooting may happen while logging out. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> --- .../ABI/testing/sysfs-bus-thunderbolt | 11 ++++- drivers/thunderbolt/switch.c | 43 ++++++++++++------- drivers/thunderbolt/tb.h | 1 + 3 files changed, 38 insertions(+), 17 deletions(-)