[v3,6/8] Documentation: dt: kona-timer: Add clocks property

Message ID 1384456243-27053-7-git-send-email-tim.kryger@linaro.org
State New
Headers show

Commit Message

Tim Kryger Nov. 14, 2013, 7:10 p.m.
The frequency for the Kona timer can either be specified through the
device tree or determined by checking the rate of the clock specified
in the device tree.  Update the documentation to reflect both ways.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
---
 Documentation/devicetree/bindings/arm/bcm/kona-timer.txt | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Patch

diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
index 17d88b2..b84e184 100644
--- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
@@ -8,13 +8,19 @@  Required properties:
 - DEPRECATED: compatible : "bcm,kona-timer"
 - reg : Register range for the timer
 - interrupts : interrupt for the timer
+- clocks: clock specifier for the kona i2c external clock
 - clock-frequency: frequency that the clock operates
 
+Only one of clocks or clock-frequency should be specified.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
 Example:
 	timer@35006000 {
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <0x0 7 0x4>;
-		clock-frequency = <32768>;
+		clocks = <&hub_timer_clk>;
 	};