[12/12] ath11k: set the multiple bssid hw cap

Message ID 20200604070952.15481-13-john@phrozen.org
State New
Headers show
Series
  • [01/12] nl80211: add basic multiple bssid support
Related show

Commit Message

John Crispin June 4, 2020, 7:09 a.m.
This patch sets the SUPPORTS_MULTI_BSSID inside ath11k.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 ++++
 drivers/net/wireless/ath/ath11k/wmi.h | 4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 8ec11c654b3e..55876600b7c5 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5980,17 +5980,20 @@  static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 static const u8 ath11k_if_types_ext_capa[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 };
 
 static const u8 ath11k_if_types_ext_capa_sta[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT,
 };
 
 static const u8 ath11k_if_types_ext_capa_ap[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT,
 };
@@ -6101,6 +6104,7 @@  static int __ath11k_mac_register(struct ath11k *ar)
 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+	ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID);
 	if (ht_cap & WMI_HT_CAP_ENABLED) {
 		ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION);
 		ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 548fa05cb1f6..14cffda43ed0 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -109,8 +109,8 @@  enum {
 
 enum {
 	WMI_HOST_VDEV_FLAGS_NON_MBSSID_AP	= 1,
-	WMI_HOST_VDEV_FLAGS_TRANSMIT_AP		= 2,
-	WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP	= 4,
+	WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP	= 2,
+	WMI_HOST_VDEV_FLAGS_TRANSMIT_AP		= 4,
 };
 
 /*