@@ -109,6 +109,111 @@
};
};
};
+
+ /* Settings for all I2C default and sleep states */
+ i2c0 {
+ i2c0_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c0";
+ ste,pins = "i2c0_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c0_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c1 {
+ i2c1_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c1";
+ ste,pins = "i2c1_b_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c1_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c2 {
+ i2c2_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c2";
+ ste,pins = "i2c2_b_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c2_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c3 {
+ i2c3_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c3";
+ ste,pins = "i2c3_c_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c3_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Activating I2C4 will conflict with UART1 about the same pins so do not
+ * enable I2C4 and UART1 at the same time.
+ */
+ i2c4 {
+ i2c4_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c4";
+ ste,pins = "i2c4_b_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c4_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
};
};
};
@@ -51,7 +51,22 @@
status = "okay";
};
+ i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_default_mode>;
+ pinctrl-1 = <&i2c0_sleep_mode>;
+ };
+
+ i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_default_mode>;
+ pinctrl-1 = <&i2c1_sleep_mode>;
+ };
+
i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_default_mode>;
+ pinctrl-1 = <&i2c2_sleep_mode>;
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
@@ -95,6 +110,12 @@
};
};
+ i2c@80110000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c3_default_mode>;
+ pinctrl-1 = <&i2c3_sleep_mode>;
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
@@ -176,6 +176,30 @@
status = "okay";
};
+ i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_default_mode>;
+ pinctrl-1 = <&i2c0_sleep_mode>;
+ };
+
+ i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_default_mode>;
+ pinctrl-1 = <&i2c1_sleep_mode>;
+ };
+
+ i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_default_mode>;
+ pinctrl-1 = <&i2c2_sleep_mode>;
+ };
+
+ i2c@80110000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c3_default_mode>;
+ pinctrl-1 = <&i2c3_sleep_mode>;
+ };
+
cpufreq-cooling {
status = "okay";
};
@@ -61,8 +61,6 @@ BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
@@ -391,26 +389,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
/* LCD VSI1 sleep state */
DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
- /* Mux in i2c0 block, default state */
- DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
- /* i2c0 sleep state */
- DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
- DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
- /* Mux in i2c1 block, default state */
- DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
- /* i2c1 sleep state */
- DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
- DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
- /* Mux in i2c2 block, default state */
- DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
- /* i2c2 sleep state */
- DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
- DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
- /* Mux in i2c3 block, default state */
- DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
- /* i2c3 sleep state */
- DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
- DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. Define possible states also for I2C4 even if it's not used by any board file at this time. Cc: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 105 +++++++++++++++++++++++++ arch/arm/boot/dts/ste-href.dtsi | 21 +++++ arch/arm/boot/dts/ste-snowball.dts | 24 ++++++ arch/arm/mach-ux500/board-mop500-pins.c | 22 ------ 4 files changed, 150 insertions(+), 22 deletions(-)