diff mbox series

[25/37] docs: networking: convert regulatory.txt to ReST

Message ID 3df26ac762a1a7b3a61a9ae39b49cd67aa09ec21.1588261997.git.mchehab+huawei@kernel.org
State New
Headers show
Series net: manually convert files to ReST format - part 2 | expand

Commit Message

Mauro Carvalho Chehab April 30, 2020, 4:04 p.m. UTC
- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/networking/index.rst            |  1 +
 .../{regulatory.txt => regulatory.rst}        | 29 +++++++++++--------
 MAINTAINERS                                   |  2 +-
 3 files changed, 19 insertions(+), 13 deletions(-)
 rename Documentation/networking/{regulatory.txt => regulatory.rst} (94%)
diff mbox series

Patch

diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index e63a2cb2e4cb..bc3b04a2edde 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -98,6 +98,7 @@  Contents:
    radiotap-headers
    ray_cs
    rds
+   regulatory
 
 .. only::  subproject and html
 
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.rst
similarity index 94%
rename from Documentation/networking/regulatory.txt
rename to Documentation/networking/regulatory.rst
index 381e5b23d61d..8701b91e81ee 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.rst
@@ -1,5 +1,8 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================
 Linux wireless regulatory documentation
----------------------------------------
+=======================================
 
 This document gives a brief review over how the Linux wireless
 regulatory infrastructure works.
@@ -57,7 +60,7 @@  Users can use iw:
 
 http://wireless.kernel.org/en/users/Documentation/iw
 
-An example:
+An example::
 
   # set regulatory domain to "Costa Rica"
   iw reg set CR
@@ -104,9 +107,9 @@  Example code - drivers hinting an alpha2:
 
 This example comes from the zd1211rw device driver. You can start
 by having a mapping of your device's EEPROM country/regulatory
-domain value to a specific alpha2 as follows:
+domain value to a specific alpha2 as follows::
 
-static struct zd_reg_alpha2_map reg_alpha2_map[] = {
+  static struct zd_reg_alpha2_map reg_alpha2_map[] = {
 	{ ZD_REGDOMAIN_FCC, "US" },
 	{ ZD_REGDOMAIN_IC, "CA" },
 	{ ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
@@ -116,10 +119,10 @@  static struct zd_reg_alpha2_map reg_alpha2_map[] = {
 	{ ZD_REGDOMAIN_FRANCE, "FR" },
 
 Then you can define a routine to map your read EEPROM value to an alpha2,
-as follows:
+as follows::
 
-static int zd_reg2alpha2(u8 regdomain, char *alpha2)
-{
+  static int zd_reg2alpha2(u8 regdomain, char *alpha2)
+  {
 	unsigned int i;
 	struct zd_reg_alpha2_map *reg_map;
 		for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
@@ -131,12 +134,14 @@  static int zd_reg2alpha2(u8 regdomain, char *alpha2)
 		}
 	}
 	return 1;
-}
+  }
 
 Lastly, you can then hint to the core of your discovered alpha2, if a match
 was found. You need to do this after you have registered your wiphy. You
 are expected to do this during initialization.
 
+::
+
 	r = zd_reg2alpha2(mac->regdomain, alpha2);
 	if (!r)
 		regulatory_hint(hw->wiphy, alpha2);
@@ -156,9 +161,9 @@  call regulatory_hint() with the regulatory domain structure in it.
 Bellow is a simple example, with a regulatory domain cached using the stack.
 Your implementation may vary (read EEPROM cache instead, for example).
 
-Example cache of some regulatory domain
+Example cache of some regulatory domain::
 
-struct ieee80211_regdomain mydriver_jp_regdom = {
+  struct ieee80211_regdomain mydriver_jp_regdom = {
 	.n_reg_rules = 3,
 	.alpha2 =  "JP",
 	//.alpha2 =  "99", /* If I have no alpha2 to map it to */
@@ -173,9 +178,9 @@  struct ieee80211_regdomain mydriver_jp_regdom = {
 			NL80211_RRF_NO_IR|
 			NL80211_RRF_DFS),
 	}
-};
+  };
 
-Then in some part of your code after your wiphy has been registered:
+Then in some part of your code after your wiphy has been registered::
 
 	struct ieee80211_regdomain *rd;
 	int size_of_regd;
diff --git a/MAINTAINERS b/MAINTAINERS
index d525b85a37a0..caab14c5c12b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -193,7 +193,7 @@  W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/driver-api/80211/cfg80211.rst
-F:	Documentation/networking/regulatory.txt
+F:	Documentation/networking/regulatory.rst
 F:	include/linux/ieee80211.h
 F:	include/net/cfg80211.h
 F:	include/net/ieee80211_radiotap.h