diff mbox series

[V2,3/5] brcmfmac: p2p cert 6.1.9-support GOUT handling p2p presence request

Message ID 1587970803-77700-4-git-send-email-chi-hsien.lin@cypress.com
State New
Headers show
Series [V2,1/5] brcmfmac: keep apsta enabled when AP starts with MCHAN feature | expand

Commit Message

Chi-Hsien Lin April 27, 2020, 7 a.m. UTC 
From: Madhan Mohan R <MadhanMohan.R@cypress.com>

Send p2p presence response from the p2p interface address instead
of the p2p device address. This is needed for p2p cert 6.1.9 to pass.

Signed-off-by: Madhan Mohan R <MadhanMohan.R@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 1f5deea5a288..c68edb198819 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1491,6 +1491,7 @@  static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
 {
 	struct brcmf_pub *drvr = p2p->cfg->pub;
 	struct brcmf_cfg80211_vif *vif;
+	struct brcmf_p2p_action_frame *p2p_af;
 	s32 err = 0;
 	s32 timeout = 0;
 
@@ -1500,7 +1501,13 @@  static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
 	clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status);
 	clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
 
-	vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+	/* check if it is a p2p_presence response */
+	p2p_af = (struct brcmf_p2p_action_frame *)af_params->action_frame.data;
+	if (p2p_af->subtype == P2P_AF_PRESENCE_RSP)
+		vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif;
+	else
+		vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+
 	err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params,
 					sizeof(*af_params));
 	if (err) {